Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws
BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
UNO Screw Terminal Block Breakout Module with Aluminum Enclosure for UNO R3.
UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....
Neufday DC Circuit Breaker,2P 250V Low-Voltage DC Miniature Circuit Breaker for Solar Panels Grid System (40A)
? Good Design : This is a great circuit breaker used to protect an electrical circuit from damage caused by excess current resulting from an overload or short circuit.
? Good Choice : Fast Closing to ensure reliable operation of the load and prolong the life of electrical circuit breakers.
? Circuit Protection Function : It is easy and reliable to use, which supports short circuit protection, overload protection.
? Features : It can be mounted conveniently on DIN rail, DIN rail is not included.
? Application : Widely used for solar panels grid system, wind and solar hybrid system and many other DC systems.
Multifunction N-Female to N-Female Bulkhead WiFi Antenna Cable Converter/Adapter with Gas Discharge Tube Surge Protector works with 2.4/5GHz 3G 4G LTE....
Convert your coaxial cable existing connector to a different type connector of your singal booster and protect your equipment from a lightning strike....
Indoor and outdoor application. With IP65 standard of ingress protection, you can install the coax surge protector inside or outside because it's made....
With wide frequency range 0-6Ghz, you can use coax lightning arrestor either in your setup for ham radio,or just a simple setup with the lte cellular....
Protects the valuable and expensive equipment behind antenna. Tri-metal plated brass body, center conductor gold plated, bronze contacts, ground....
UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)
✯ Category: Fuse Holder Terminal Block.
Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
✯ Compact Fuse holder Terminal Block used in control circuit applications..
CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel
MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
Surge Protection Device, 2P DC Photovoltaic Lighting Protector Low-voltage Arrester Whole House Surge Protector for Home and Commercial Lighting Protection(2P40KA)
Mainly Applications： Indoor Surge Protection Low Voltage Arrester Device can be used to protect electrical systems and load electrical equipment from lightning and instantaneous overvoltage.
Top Grade Material：PC flame retardant shell is safe and sturdy. Purple copper features great electrical conductivity. Inner precise electronic components works more stable..
Easy to Install：This product adopts 2P guide rail installation, installation is very simple. Installation with standard 36MM guide rail and use with circuit breaker in distribution box.
More Applications： The house surge is suitable for C, D class lightning protection, equipotential connection when lightning strikes, rapid response when lightning strikes, pressure relief, protection of household appliances and your safety.
Modular Structure：Modular design surge protection device, daily use and maintenance are very simple..
