Best Din844 Roughing End Mill

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.

Check Stock

Cable Matters Dual 5 Pin DIN MIDI Cable (Combined 5 Pin MIDI Cable) - 9.8 Feet

Hit the right note with the Cable Matters dual MIDI cable.
Dual 5 pin DIN to 5 pin DIN cable is compatible with a MIDI keyboard controller, MIDI foot controller such as the Behringer FCB1010, MIDI analog synthesizer or MIDI sequencer such as the Korg Volca Sample, MIDI audio interface box, an electronic drum machine and more.
Male to male MIDI cable is wired straight through in 5 pin to 5 pin MIDI cable format to support MIDI equipment.
Unique dual cable construction of the combined MIDI cable supports the MIDI OUT function and the MIDI IN function all in one cable.
Interconnect equipment with one single cable to reduce cable clutter and easily identify cables.
Superior construction of DIN cables includes a keyed 5 pin DIN connector with easy-grip treads and molded strain-relief on each end.
Flexible cable is easy to use in the studio and coil up when not in use with a portable MIDI keyboard.
The 5 Pin 180 degree DIN connector is commonly found on MIDI equipment.
Cable pair is ideal for use in studios, home recording studios, and on the road.

Check Stock

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

4 Flute design for creating finer finishes and creating a higher metal removal rate.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.

Check Stock

PIIHUSW SVHS Cable S-Video Cable Splitter 4 pin Mini DIN Adapter Split a SVHS Video Signal - Male to 2 Female 2 Way Y-Splitter for TVs, VCRs, DVD

Connector 1 : Two 4 PIN mini-DIN - Female.
SVHS S-Video Splitter Cable has a male to dual female 4-pin mini-DIN connection which are Suitable to extend the S-Video connection to TVs, VCRs, SVH, DVD players to your PC..
SVHS (S-video) Plug to Plug Video Cable 4 pin Mini DIN link a vis to a computer VHS and HI8 conversion to DVD/Blu-ray..
SVHS extension cable also known as...S-Video, TV-Out, 4-pin Mini Din. This cable feeds S-Video along 15m from a DVD player to a projector and the picture out the other end is perfectly watchable..

Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Check Stock

Accusize Industrial Tools 5/8'' Sclcr Indexable Boring Bar with 1 Ccmt32 Insert, P252-S405

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Check Stock

Kodiak Cutting Tools KCT137718 USA Made Premium Carbide End Mill, Extra Long, 4 Flute, 5/16\ Shank, 4\ Overall Length, 1-5/8\ Length of Cut, 5/16\ Diameter

Premium Sub-Micrograin Carbide End Mill Made In the USA.
1-5/8" Flute Length (Length of Cut), 30 Degree Helix.
4" Overall Length Center Cutting Carbide Endmill.

Check Stock

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme fine gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

Check Stock

WATER PUMP for Ford New Holland Tractors, Boomer, Skid Steer Replaces SBA145016780, SBA145017780,SBA145017790, SBA145017721, SBA145017780, SBA145017730, SBA145016901, CSU80-0012

New Water Pump Suitable for Ford New Holland 1720 1925(FROM 01 OCT 1993)1920(FROM 01 JAN 1987 TILL 30 SEP 1993).
Fits: New Holland Compact Tractor: 1920(FROM 01 JAN 1987 TILL 30 SEP 1993), 1320, 1520, 1620, 1715, 1720, 1925(FROM 01 OCT 1993), TC30, TC33D, TC33DA, TC35, TC35A, TC35D, TC35DA, TC40, TC40A, TC40D, TC40DA, TC45, TC45A, TC45D, TC45DA, TC48, TC55, T2310, T2320, T2330, T2410, T2420 New Holland Boomer: 2030, 2035, 3040, 3045, 3050, 3415(FROM 01 JAN 1987 TILL 30 SEP 1993), 4055, 4060.
New Holland Skid Steer Loader: L140, LS140, L150, LS150, L160,LS160, L170, LS170, L175, L465, LX465, LX485, LX565, LX665 Shibaura Engine : N843-C, N843-H, N844L-C, N844LT-C, N844T, N844.
Directly replaces New Holland Part No. SBA145016780, SBA145017780, ,SBA145017790, SBA145017721, SBA145017780, SBA145017730, SBA145016901, CSU80-0012.

Check Stock

Zassenhaus Berlin Pepper Grinder Mill, 7.1-Inch, Dark Stained

BERLIN PEPPER MILL: A timeless bestseller, the Zassenhaus Berlin mill brings classic beauty and style to your kitchen or dining room table. To suit your personal preference, they are made from meticulously selected solid beechwood in either a dark stained or a natural finish..
PRECISION MANUAL GRINDER: The Zassenhaus pepper mill features a ceramic grinding mechanism that is made in Germany, and is harder than carbon steel and won't dull or corrode over time. Each time you use this exceptional refillable mill, your spice is coarsely cracked and then finely cut. We offer a 25-year warranty on this superior grinding mechanism..
PREMIUM QUALITY MATERIALS: This hand grinder is made in Europe from meticulously selected solid beechwood. It has a stainless steel spindle for uniform spice output and a ceramic grinding mechanism. This high end wood pepper mill will elevate your home kitchen experience..
EASY TO USE ADJUSTABLE PEPPER GRINDER: This refillable pepper and spice grinder features a 6 position dial that lets you adjust from a coarse to a fine grind. The dial won’t move until you move it, ensuring a consistent seasoning every time. Simply unscrew the top knob to fill with peppercorns, then turn the top of the mill clockwise to grind. To clean....

Check Stock