Best Dip Tube Nozzle

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend,Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock

Numatic Henry Extra Vacuum Cleaner with AutoSave Technology HVX200-838689

  • FEATURES: Twinflo' performance, a powerful 680W, 0.9 Hp with a 33' cord and rewind storage system.
  • MICROFRESH FILTER: The 3-stage Microfresh filter system enhances filtration standards to 98%, and it embodies a giant activated charcoal filter membrane sandwiched between twin Tritex filters, providing and effective odor control system.
  • AIROBRUSH AND HARD BRUSH: The unique Airobrush provides a superb level of carpet care and is ideal for cleaning up pet hairs. The hard floor brush is a real bonus when cleaning extensive hard floor surfaces..
  • ACCESSORY KIT: A tool for every job, full accessory kit XS1 with stainless steel tube set..
  • INCLUDES: This 11 piece accessory kit comes with a 240mm Crevice Tool (32mm), Two Stainless Steel Extension Tubes (32mm), Double Taper Hose/Tool Adaptor (32mm), 65mm Soft Dusting Brush (32mm), 150mm Upholstery Nozzle (32mm), 150mm Slide on Brush for Upholstery Nozzle, 290mm Combination Floor Tool, Stainless Steel Tube Bend with NPC Volume Control (32mm), 300mm MultiFlo Dry Brush Nozzle, FloMax Conical Hose 2.2m, and AiroBrush (AB290).
Check Stock

DONLAB MFC-R-6F Glass 6 Ports Single Manifold Vacuum Gas Distributor with 2mm PTFE Stopcocks and Right Air Nozzle

  • Single-tube manifold vacuum gas distributor 6 ports with 2mm PTFE stopcocks.
  • The outer diameter of the main tube is 28mm..
  • The side gas nozzle is 10mm O.D. and the lower stopcocks gas nozzle is 10.5mm O.D..
Check Stock

16 Pieces Brass Misting Nozzles Kit Atomizing Nozzle Kit 0.4 mm Orifice 2 Points 1/4 Inch Lock Misting Nozzles with 4 Pieces Plug for Patio Misting System Outdoor Cooling System Garden Water

  • Package content: comes with 16 x spray seats, 16 x nozzles, 4 x plugs, these spray cooling systems directly use water for spraying and cooling, without electricity, and can save much watering time compared with manual watering, enough for you and your family to use.
  • Brass misting nozzle: 10/24 thread, 0.015 inch/ 0.4 mm orifice, brass body, including self-sealing O-ring, can be applied without any leak-proof tape or sealant, the nozzle can produce very fine fog to cool the air and lower the temperature in the hot summer.
  • Reliable brass: the outdoor misting nozzle tees is made of brass material, which has high efficiency, anti-rust and anti-fog performance.
  • Other parts are made of polypropylene material, with good sealing, no leakage, stable and firm, long service life.
  • Maintenance and cleaning: hard water, lime and calcium may cause clogging of the atomizing nozzle.
  • Dip it in vinegar and warm water to clean the nozzle regularly.
  • When the misting nozzle is blocked by impurities, it can be completely disassembled, which makes it easy to clean.
  • Wide applications: 1/4 inch lock misting nozzles kits are very suitable for agriculture, terraces, greenhouses, swimming pools, lawns, gardens, cooling systems, irrigation (flowers, grass, vegetable watering), balcon....
Check Stock

Sewer Jetter Kit 50FT for Pressure Washer, 5800PSI Drain Cleaner Hose 1/4 Inch NPT, Corner, Rotating & Button Nose Sewer Jetting Nozzle with Spanner Waterproof Tape Pearl Corsage Pin Father's Day Gift

  • [PROFESSIONAL SEWER JETTER KIT INCLUDES]:  1 × 50ft sewer jet hose,1 × button nose sewer jet nozzle, orifice 4.0,1 × M22 female to 1/4’’ female NPT coupler,1 × 1/4’’ quick connect plug,1 × rotating sewer jetter nozzle,1 × corner sewer nozzle.1x waterproof tape, 2xspanners, 1x box of pearl corsage pin. Complete sewer jetter kit to meet your variety need..
  • [HIGH QUALITY 5800PSI CLEANER HOSE]: Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone.
  • [3 EFFICIENT SEWER JETTER NOZZLES]:4.0 orifice Button Nose Sewer Jetter Nozzle clears blockage and flush out debris by front 0° spray jet and 3 rear 33° spray jets.4.5 orifice Rotating Sewer Jet Nozzle offers an even cleaning and flushes out debris by 3 backward rotating spray jets which blast into clogged pipe and moves it through pipe. Corner sewer jetter nozzle: 1 water spray sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.
  • 【QUICK CONNECT PLUG and FEMALE METRIC M22 to 1/4 Inch ....
Check Stock

Le Lematec Soda Blaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty Soda Blaster with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

2Pcs 16' x 16FR Soft Silicone Enema Colon Tube Tip Kit Fit into Enema Tubing for Coffee Enema Higher Colon Cleansing Gerson Therapy Enema Replacement Nozzle Anal Rectal Cleaner Catheter Hose

  • 【Perfectly Safe】‒Enema nozzle recommended by Gerson Institute is made with medical grade silicone odorless, Non-toxic, BPA & phthalates free, be able to Re-sterilized in boiling water, Very safe and comfortable to colon cleanse..
  • 【Super Effective】‒Atraumatic Smooth rounded tip with two lateral eyes and side opening of enema tube ensure efficient colon detox cleansing.
  • 【Ultra Soft】‒Extremely soft silicone enema tip allow you smooth, easy and gentle insertion, Preferred by for Hemorrhoids. Soft, Flexible & kink resistant tubing for ultimate comfort and liquid flow unobstructed.
  • 【Extra Long】‒16" Length x 16FR Diameter silicone colon tube help delivers hydration liquid higher up in the colon for deeper enema and high colonic irrigation..
  • 【Good Compatibility】‒Flexible & tapered mounting end allow silicone rectal tube compliance with almost all enema kit, fit the all enema nozzle and place over enema hose also. Along with 2 slim soft silicone enema colon tubes ,you will receive two free bonus traditional hard enema tip and soft enema nozzle for your preference..
Check Stock

Agri-Fab 731-01524 Lawn Tractor Lawn Vacuum Attachment Hose Nozzle Tube Genuine Original Equipment Manufacturer (OEM) part

  • This part is compatible with models including.
  • Hose Nozzle Tube 731-01524 Attaches To The End Of The Hose And Directs Leaves And Debris From The Surface Into The Vacuum Hose.
  • Genuine Original Equipment Manufacturer (Oem) Part. Compatible Brands: Craftsman.
  • This Hose Nozzle Tube (Part Number 731-01524) Is For Lawn Tractor Lawn Vacuum Attachments.
  • Follow The Instructions In Your Owner's Manual When Installing This Part.
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Le Lematec Sandblaster Long Nozzle Attachment, Sandblasting Nozzle Tip for Portable Sandblaster, Sandblasting Accessory for Spot Blasting

  • Heavy-duty Sandblasting Long Nozzle made of steel and aluminium that is very suitable for tough working environments and high-speed sandblasting operations..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste..
  • Clean hard-to-reach areas, tight spaces, and small and complex objects easily with our long nozzle sandblaster tip (sandblaster gun sold separately). Easy to install and replace, switch from a short nozzle to this long nozzle..
  • Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm.
  • Compatible with all Le Lematec sandblasters and support various media. Refer to our media guide for a complete list of abrasives and sizes..
Check Stock