Best Diy Rpm Switch

Stens 751-180 Wireless Tachometer, Black

  • Specs: Description: Wireless Tachometer, A hand held precision instrument, Accurately determines RPM on 2-cycle and 4-cycle , single cylinder engines, No direct connection required/wireless, Just hold built in antenna near spark plug, Selector switch gives 0-5000 RPM low scale or 0-15000 RPM high scale, Solid state electronics, Battery NOT included.
  • Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
  • Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..
Check Stock

REESIBI Cordless Electric Air Duster, 3-Gear to 90000 RPM Strongest Powerful Dust Blower, Replaces Compressed Air Cans for Computer Keyboard Car Cleaning, Rechargeable 7500mAh

  • ...nd noise relief while maintaining strong power. Cleaning will become a enjoy..
  • 【3-Speed Adjustment】- Reesibi air duster has 3 speed wind speeds (50000 RPM, 70000 RPM, 90000 RPM). Three airflow modes are suitable for different devices cleaning. The steady, pure airflow won't hurt your valuables at all. Long press switch for 3 seconds can switch the device on & off. Short press switch can switch to three wind speeds.This is practical and simple..
  • 【Rechargeable Battery & Fast Charging】- Our cordless air duster has a built-in large capacity 7500mAh lithium battery and allow this duster to run nearly 25-40 minutes continuously. Comes with USB-C fast charging cable, fully charged within 4 hours. It can be charged by computer, mobile power, car charger, adapter..
  • 【Eco-Friendly & Energy-Efficient】- Compared with the compressed air can, the Reesibi dust blower will not produce chemicals, liquids or freezing during cleaning. It protects your electronics from liquids. This air compressor can be used multiple times, resulting in significant energy savings. In the long run, It can save your money and protect the environment..
  • 【Widely Used & Easy to Carry】- The electronic air duster measures 5.6 x 2.5 x 7.4 inches and weighs approximately 1.08 pounds. ....
Check Stock

Metabo HPT 36V MultiVolt Brushless Angle Grinder | 4-1/2-Inch | Slide Switch | Tool Body Only | G3612DAQ6

  • MULTI-VOLT AC/DC: Convenience meaning the tool can be powered by a MultiVolt battery or the MultiVolt AC adapter (both sold separately).
  • SPEED ADJUSTMENT: Variable speed with dial auto mode: produces 3,000 to 9,500 RPM (1-5) and 5,500 to 9,500 RPM (A) to easily adjust the speed best suited for the application.
  • SAFETY FEATURES: Brake, soft start, 0-voltage restart, anti-kick back, over current protection.
  • SLIDE SWITCH: Slide switch with lock-on feature for continuous operation applications.
  • GRIP: Slim grip circumference reduces fatigue and improves control, especially during continuous use applications.
Check Stock

VEVOR Air Tire Buffer, 2500rpm Low Speed Tire Buffer, 35 mm Pneumatic Buffing Tool, Variable Speed Tire Grinder With Whip Hose, Tire Repair Buffing Wheel For Inner Liner Cleaning, Reaming And Drilling

  • Air Repair Grinder Tool: Air Pressure: 90PSI. Air Consumption: 4CFM. This type of pneumatic tire repair tool can compress air for power. It is widely used on tires, rubber products, metal, and other materials for polishing, burr repair, etc..
  • 2500 Rpm Speed Tire Buffer: Tire buffer tool with a low speed of 2500 rpm and powerful torque is suitable for deep processing. Low-speed avoids excessive wear. At the same time, it avoids high-speed running to generate heat and damage your tires..
  • Tungsten Steel Grinding Head: The auto tire repair kit comes with one metallic buffing wheel head that is durable enough. And it is easy to be replaced when worn. 11 mm precision chuck, easy to install and disassemble. Convenient for you to change the tire grind head..
  • Convenient to Operate: Our products use a pressure plate start-stop switch, which is easy to operate. The back of the product is equipped with a speed control switch, adjusted with a slotted screwdriver. The speed is from 0 RPM to 2500 RPM..
  • Secure Rear Exhaust: Pneumatic buffing tool is equipped with a muffler pipe to reduce the exhaust noise. The directional exhaust is away from the working area, providing you with a comfortable working environment..
Check Stock

Makita XUX01ZM5 36V (18V X2) LXT® Brushless Couple Shaft Power Head with String Trimmer Attachment, Tool Only

  • Makita-built Brushless Motor delivers up to 7,100 RPM for faster cutting.
  • 3-speed options (Low: 4,200 RPM, Medium: 6,000 High: 7,100 RPM) for power management.
  • Variable speed trigger switch for controlled cutting speed.
  • Compatible with a variety of Makita couple shaft attachments for various applications.
  • Lever style lock system allows for quick tool-less installation and replacement of attachments.
Check Stock

BASSTOP [Update Version] DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller Without Electronics Set-Atomic Purple

  • Specially designed DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller (no electronics part....
  • Precise cutout and 100% original size, you can DIY your personalized switch NS NX Console and Right Left Switch Joy-Con Controller with this case set.
  • Easy to install: Just take out the original Switch NS NX Console case and Right Left Switch Joy-Con Controller case, then install this replacement....
  • You can have a lot of fun by DIY your personalized Nintendo switch NS NX Console and Right Left Switch Joy-Con Controller with this anti-scratch....
  • What you get: replacement case set for Switch NS NX Console and Right Left Switch Joy-Con Controller, 12 Month 100% Satisfaction Guarantee and 24 Hour....
Check Stock

BASSTOP [Update Version] DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller Without Electronics Set-Jungle Green

  • Specially designed DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller (no electronics part....
  • Precise cutout and 100% original size, you can DIY your personalized switch NS NX Console and Right Left Switch Joy-Con Controller with this case set.
  • Easy to install: Just take out the original Switch NS NX Console case and Right Left Switch Joy-Con Controller case, then install this replacement....
  • You can have a lot of fun by DIY your personalized Nintendo switch NS NX Console and Right Left Switch Joy-Con Controller with this anti-scratch....
  • What you get: replacement case set for Switch NS NX Console and Right Left Switch Joy-Con Controller, 12 Month 100% Satisfaction Guarantee and 24 Hour....
Check Stock

Noctua NF-A14 PWM, Premium Quiet Fan, 4-Pin (140mm, Brown)

  • Premium quiet fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 24.6 dB(A), >150,000 h MTTF.
  • Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • Square frame design is ideal for water cooling radiators (AIO or DIY), PC cases and other chassis (intake & exhaust), cabinet ventilation, etc..
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Intellitronix Digital RPM Activated 3 Mode Switch for Cars & Trucks - Programmable from 2,000 to 9,900 RPM Size: 4” x 3” | Made in USA

  • DESIGNED FOR RACERS – Lets you fine-tune your nitrous settings for any RPM between 2,000 and 9,900 (with precise 100 RPM increments) on a bright digital display. Totally reliable with 4, 6, or 8 cylinder engines..
  • DIPSWITCHES EASY PROGRAMMING FUNCTIONS – Simply remove the plastic cover at the top to quickly program the dipswitches’ position. The case also features a blue LED to let you know when the desired RPM is reached for easy testing and a green LED power indicator..
  • CHOICE OF TRIGGER OPTIONS – With the Intellitronix microprocessor-controlled RPM-activated switch, you can choose from Normally Open (turn on an accessory at the desired RPM) or Normally Closed (turn off an accessory at the desired RPM)..
  • YOU CAN'T BLOW IT UP! – Safety features that offer complete peace of mind: over-current protection, short-circuit protection and over-voltage protection. It comes with a 3.5 AMP Rating..
  • MADE IN THE USA WITH TRUE MOTORING PASSION – Because Intellitronix parts are made in America at its own manufacturing facility and include a limited lifetime manufacturer's warranty you know you are getting the very best solution for your car or truck!.
Check Stock

Metabo HPT 36V MultiVolt™ Cordless 4-1/2-Inch Grinder | Tool Only - No Battery | Paddle Switch | G3612DBQ6

  • MULTIVOLT: This tool can be run on both 36 Volt battery or AC power cord.
  • MOTOR: Features brushless motor technology for more runtime, increased power and extended durability.
  • SWITCH: Paddle switch that turns off the tool when released for added safety.
  • SPEED ADJUSTMENT: Variable speed dial with auto mode: produces 3,000 to 9,500 RPM (1-5) and 5,500 to 9,500 RPM (A) to easily adjust the speed best suited for the application.
  • GRIP: Slim grip circumference reduces fatigue and improves control, especially during continuous use applications.
  • SIDE HANDLE: Vibration absorbing side handle.
  • SAFETY FEATURES: Features: brake, soft start, 0-voltage restart, anti-kick back, over current protection.
Check Stock