Best Double Flute Straight Router Bits

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

KOWOOD Plus Pattern Flush Trim Router Bit Set, 1/4 Inch Shank, Top Bearing Flush Trim Bit Kit. Cutting Height in 25/64, 3/4, 1, 1-1/2. With updated Kowood C3 Carbide. Great for trim shelf edging, veneer or laminates

  • KOWOOD Plus pattern flush trim router bit set is an upgrade router kit designed for create smooth straight edge or make a duplicate part with template..
  • KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience..
  • KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of use..
  • Wide range of applications, suitable for dense wood, laminate, particleboard, and plywood..
  • Universal 1/4" tool holder is suitable for all major desktop router workbenches, such as KOWOOD, Bosch, DeWalt, Tooldo, Makita, Milwaukee, MNA, Porter & Cable, Skil, Ryobi, Black & Decker. (Fit for handheld router, table router or CNC)..
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

TA-VIGOR 12mm Straight Shank Twist Drill Bit, High Speed Steel HSS-Co 5% M35 Cobalt Round Shank Twist Drill-Perfect for Drilling Metal Materials Steel,Copper,Aluminum Alloy

  • 【Size & Package】Cutting Edge Diameter : 12mm / 0.47″.
  • Package includes1pc 12mm straight shank twist drill bit..
  • 【High Speed Steel】Made of HSS cobalt material, the drill bit is hard enough, anti-bending and will not fracture easily. The surface coating can better protect the drill bit sets from corrosion and expand their longlife..
  • 【Straight Shank】Round shank is suitable for a wide variety of toolholding systems. Universal flute and overall length allow minimal adjustment during work..
  • 【Double Cutting Edge】 The sharp cutting edge promotes faster as well as preciser drilling. Its spiral flute assure fast heat dissipation, protecting the twist drill bit from high temperature damage and getting rid of glitches or scrap..
  • 【Wide Applications】Our twist drill bits have various sizes and can meet your needs for drilling glass, stainless steel, metal and wood materials, etc.. They can be clamped to manual and electric drilling tools, widely used in household or processing industries..
Check Stock

Accusize Industrial Tools Double Flute Extra Long Straight Carbide Tipped Router Bit, 1/2'' Diameter, 3'' Depth, 1/2'' Shank, 4.7'' Oal, 0021-0828

  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers..
  • Cuts all composite materials, softwoods, plywood, hardwoods, glass fiber, and plastic, Especially for hipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), MDF, etc..
  • Carbide tipped double flute straight bits are designed to provide excellent smoothness of cut and balanced cutting with minimal vibration..
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock