Best Double Flutes Drill Bit

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2".
  • Wildly range of adaptations:Can be used with Power drills, flat or allen wrenches,tap adapters. ONE-YEAR WARRANTY & 24HRS ONLINE SERVICE by XEWEA.
Check Stock

Klein Tools KTSB15 Step Drill Bit #15 Double Fluted 7/8 to 1-3/8-Inch with Easy-to-Read Step Markings and Targets & 11055 Wire Cutter and Wire Stripper Stranded Wire Cutter Solid Wire Cutter

  • Product 1: Two flutes on this Step Drill Bit cut faster and keep bit cooler.
  • Product 1: Fast-starting, non-walking drill tip.
  • Product 1: High-visibility silver targets for primary hole sizes.
  • Product 1: Thick 3/8-Inch hex shank won't round out in the drill chuck for a more positive grip.
  • Product 2: Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 shears.
Check Stock

Chicago Latrobe 120DHT High-Speed Steel Long Length Drill Bit, TiN Coated, Round Shank with Tang, Parabolic Flute, 135 Degree Notched Point, 7/16\ Size

  • Parabolic long length drill bit has a drilling depth of 8 to 12 times its diameter and has an extended flute and overall length to drill deeper and reach farther.
  • High-speed steel (HSS) provides hardness for wear resistance, and the titanium nitride (TiN) coating offers increased wear resistance, extended tool life, and higher hardness.
  • Self-centering 135-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
  • Parabolic flutes are wider than standard flutes for improved rigidity in deep drilling applications, and increased coolant flow and chip evacuation.
  • Round shank with tang has a flat shank end for use with positive split sleeve drivers and other drills that accept tanged shanks.
Check Stock

MulWark 82° Countersink Drill Bit Set incl. 5pcs Free Replaceable HSS Drill Bits for Wood｜3/8\ Quick-Change -Chamfered Adjustable Drilling Tool Kit on Pilot Counter Sink Holes for Woodworking- 5 Pack

  • HIGH DURABILITY - This countersink drill bit set is proudly made of classic High Speed Steel with excellent hardness of HRC 62-64.
  • it offers superior cutting power, high durability, and good abrasion resistance.
  • TRUE 82° ANGLE: These pilot screw countersinks bits are designed to match the most commonly used woodworking 82° screws you might encounter in the US and Canada.
  • SELF-CLEARING: Drill bits are precisely fit into the countersink sleeves and the two chamfered flutes enable faster operation and self-clearing drilling on the swarf, making perfectly sized and shaped holes.
  • PERFECT YOUR CARPENTRY - The 2 in 1 design turns two-step countersinking into one-step operation. This can make perfect countersink holes for both flush-set and plugged screws, without splitting the wood and enjoying neat projects with drill bit sets.
  • VERSATILE USE: Comes with 5 pieces of replaceable drill bits as a bonus and covers the full range of screw sizes. The countersink bits are ideal for bench drill, hand drill, and a conventional electric drill, perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber, etc...
Check Stock

wesleydrill Masonry Drill Bit Set 5 pcs 1/4"-1/2" Concrete Drill Bit Set Fit for Home DIY Building and Engineering Suitable for Electric Drill or Professional Drill

  • ...differenct concrete drill bit sizes that will help in drilling by starting with the smallest bit and continuing to the size needed..
  • [Easy To Drill, Fast And Clean]: Tungsten drill bits strong tungsten carbide drill bit tip and longer service life of masonry drill bit, the double U-type groove slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
Check Stock

DEWALT Concrete Drill Bit, Spline Shank Rotary Hammer Bit, 2-Inch by 17-Inch by 22-Inch, 4-Cutter (DW5769)

  • High impact tip of the concrete drill bit maximizes carbide surface contact for longer bit life..
  • Open head design channels dust into flutes for quicker drilling.
  • Longer helix four flute design expedites mill removal for quicker drilling..
Check Stock

Fisch Pen Drill Bits 7mm x 150mm - Pen Maker Flutes for Wood Turning Pen Blanks and Pen Making - Durable Easy to Install Guarantees Clean Entrance - FSN-322559 - Made from M2 HSS High Speed Steel

  • The flutes of a Fisch Pen Makers Bit are noticeably different from conventional style drill bits.
  • This product is easy to use easy to install and highly durable.
  • The cutting edge geometry of this bit guides it straight through tough end grain and guarantees a clean entrance and exit hole.
  • Parabolic Flute design eliminating the need to withdraw the bit until the hole has been drilled through.
  • Can drill up to 1350 holes without sharpening.
Check Stock

Masonry Drill Bit Set & Cement Drill Bit, Professional Drill Bit Set (10PCS) for Glass/Brick/Plastic/Cement/Wood/Tile/Etc, Industrial Strength Carbide Drill Bit Tip, 1/8\-1/2\ by TITGGI

  • TITGGI Masonry drill bit set, industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier. this cement drill bits can easily penetrate various material (glass, ceramic, cement, wood, brick, travertine, hard plastic, etc.).
  • This masonry bit is suitable for most general drill, electric drill, hand drill and bench drill, the double U-type groove slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly, strong tungsten carbide drill bit tip and longer service life of TITGGI masonry drill bit..
  • Package includes 10 Pcs drill bit set: 1/8.
Check Stock

Niagara Cutter 17011737 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 6 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 2pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO

  • Cobalt Steel – Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit..
  • HSS Titanium Coating – Classic HSS Construction With Titanium Coating For Capability And Durability. The Cutting Edge Is Hardened And Honed For Sharpness..
  • Flutes Form – 2 Flutes Form Helps Clear Chips And Debris Away From The Bit, Decreasing Friction And Heat For A Faster, Cooler Drilling Process, Chatter-Free Design With Staggered Cutting Teeth Ensure The Precise Countersinking And Hole Smooth Clean..
  • Straight Shank And 135° Point Angle – Straight Shank For Standard Drill Chucks And Collet Chuck To Hold Firmly, Assuring Accurate Centering.
  • Helical Flute For Swarf To Easily Get Out.
  • Ideal For General Purpose Drilling Applications..
  • For Metalworking – Particularly Successful In Cutting Through Hard Metals(Hardness Less Than Hrc38°) Such As Stainless Steel And Cast Iron, Although They Can Be Used For Softer Materials Like Copper And Aluminium, Too. Not For Hardened Steel And High Carbon Steel..
Check Stock