Best Double Pcb

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

RF Mixer, Passive Frequency Transducer Module RFout=DC?1.0GHz Diode for Demodulator for Phase Comparator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Ducky One Mini RGB LED 60% Double Shot PBT Mechanical Keyboard Cherry MX Silver

  • Distinctive bezel design and dual layer PCB.
  • Supports Ducky Macro 2.0, the most powerful hardware available in the market.
  • 3 level adjustable feet and detachable USB-C cable.
  • Fun RGB lighting modes and mode architecture.
Check Stock

RF Mixer, RFin=1.5‑3.8GHz Converter Double Balanced Frequency Transducer Module for Phase Comparator for Demodulator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Double Balanced Frequency Transducer Module, RF Mixer Diode RFout=DC‑1.0GHz for Phase Comparator for Demodulator

  • The product have large heat dissipation area, possess stable operation and long running time.
  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
Check Stock

Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier Black

  • 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power.
  • DOUBLE POWER Bridge 2 monoblocks together for double power.
  • MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply.
  • OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection.
  • SPECIFICATIONS: High/speaker level and low level/RCA input.
  • 4g power wire and 8g speaker wire outputs.
  • Variable 12dB high and low pass crossovers.
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

Ducky One 3 Matcha Full-Size Keyboard (Cherry MX Silver)

  • Featuring Ducky's all new QUACK Mechanics design philosophy.
  • Dual layer Hot-swap PCB w/ exclusive Kailh yellow hotswap sockets.
  • Low profile One 3 case design in a wide array of exclusive color options.
  • Equipped with dual-layer high-grade silicone and EVA foam sound dampeners.
Check Stock