Best Double Sheave Cable Block

Maasdam Rope Puller Kit- with 200' Rope, Spliced Hook and Loopie Sling

  • Very high efficiency single pulley with one-way rotation and swivel.
  • Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue.
  • Optimal hauling efficiency and lowering convenience: the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads.
  • Easy handling: swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers..
  • Sheave diameter: 40 mm maximum usage load: 3 x 2 = 6 kN.
Check Stock

Dutton-Lainson Company SA12015AC 120 Volt/2700 lbs/4000 lbs Electric Winch with Built-In Remote

  • 2700 pounds (dead weight) single line load capacity.
  • Double line operation (using pulley block and second hook) increases capacity to 4000 pounds.
  • Factory installed remote control with 10 foot cord.
  • Includes 7/32 inch x 50 feet aircraft cable and hook, plus pulley block and hook, installed and ready to use.
  • 3 minute run time requires 15 minute cool down.
Check Stock

Polaris Snowmobile Quick Drive Belt Kit, Part 2206046

  • The ROP Shop replacement 103 HPQ Drive Clutch.
  • Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
  • This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
  • This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.
Check Stock

PETZL - ROLLCLIP A, Pulley-Carabiner, Triact-Lock

  • Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
  • With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
  • H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
  • Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
  • Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).
Check Stock

GearAmerica Aluminium Ultra Snatch Block – 40,000 lbs Minimum Breaking Strength, 20,000 lbs Working Load Limit – for Synthetic Winch Lines and Soft Shackles – Red

  • Off-Road Like a Pro: Effortlessly recover any stuck vehicle by changing the direction of your pull.
  • perfect for navigating around trees or other obstacles and getting your ATV, UTV or 4x4 back on the trail.
  • Ease the Strain and Increase Pulling Power: Increase the lifespan of your winch motor and double its pulling power.
  • our Ultra Snatch Blocks are recommended for winches up to 20,000 lbs capacity.
  • Designed For Synthetic Winch Line: Especially designed for Synthetic Rope up to ⅝” (16mm) and soft shackles, this pulley won’t cause your line or shackles to fray or deteriorate.
  • Not recommended for steel cable or d-ring shackles.
  • Half the Weight, Double the Capacity: With a hefty 40,000 LBS Minimum Breaking Strength (20,000 LBS Recommended Working Load Limit), our aluminum, rust-proof Ultra Snatch Block has double the capacity of a standard steel snatch block with only half the weight.
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • ...s to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
  • 【After-sales Service】 Life-time professional technical supports,If you ....
Check Stock

Drywall Lift,Drywall Panel Hoist Lift 11FT Sheetrock Lift Drywall Lift Professional Jack Lifter Heavy Duty Sheetrock Hoist Holder Upgrade Adjustable Telescopic Arm and Caster Wheel Lockable

  • 【150Lbs Load Capacity】This drywall lift is made of heavy duty steel. The panel hoist ensures its long service life. The panel hoist has a load capacity of approximately 150 lbs..
  • 【Allows One Person to Work Alone】This drywall lift is perfect for DIY and residential use. The panel hoist allows one person to work alone to install gypsum board walls and ceilings. The panel lifts are easy to position and adjust to place them exactly where I need them..
  • 【Safe and Balanced】 Drywall lift with wheelbase. Wide enough to stabilize a 12-foot drywall panel 15 feet off the ground, the panel lift's telescoping center is physically lifted by a cable/pulley mechanism. Turn the sheave in the panel lift's 3/16-inch metal aircraft cable..
  • 【Tool-Free Assembly】Easy to assemble, no tools required. Quick tool-free setup and disassembly for storage..
  • 【Adjustable Telescopic Arm and Panel Rotation】 The telescopic arm is adjustable and perfect for installing panels. It is a rubber telescopic arm that will not scratch your panels. This gypsum board lift can tilt 60° forward or backward and rotate 360°. Widely used for flat and pitched roofs..
Check Stock

2022 Official Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor, Direct Drive Upgrade Kit for Creality Ender 3 pro, Ender 3, Ender3v2, Ender 3 Max, Support TPU Filament

  • ... Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender3 Max, providing direct extrusion and high temperature printing conditions..
  • [Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. Double gear feeding, stable and reliable. The double tooth structure does not damage filaments and the feeding is more reliable and stable. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • [Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity..
  • [Easy to install and use] It doesn’t affect the inherent function of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly. Note: There is a red cable with blue label on Sprite "Please insert into ad....
Check Stock

Extreme Max 5600.3093 Snatch Block w/o Hook

  • Correct use of a snatch block can double pulling power.
  • Fits 3/16" cable (size typically found on 2500-3600 lb. winches).
  • Works with all ATV winches, designed for semi-permanent installation.
  • Use angled pulls with your winch to get more power with less heat build-up and amp draw.
Check Stock

E&K 14'x24' Pool Winter Covers for Inground Pools Rectangle Safety Cover Mesh for Backyard Yard Swimming Pool Cover Wire Cable All Edges Anchors All Hardware Included Light Gray

  • INFO - The cable along the edges is made of high quality metal. Edges are finished with heavy duty double layers reinforced stitched seams, prevent frayed edges and keep cover in shape. Superior tensile strength & durability..
  • MATERIAL - Made of 100% brand new high-density Permeable sunshine Block Fabric 160GSM polyethylene knitted fabric material..
  • ADVANTAGE - With material that’s easy to clean. This material is fade resistant, tear resistant and will not stain..
  • USAGE - Woven knitted, breathable fabric allows water to go through, prevent pooling water. Moreover, it can also perfectly block the falling leaves, snow, or debris, leaving a crystal clear pool next spring. Sunshine inhibitors are now added during the manufacture of swimming pool cover and good pool cover now generally comes with a 3 years sunshine degradation warranties..
  • PACKAGE INCLUDED - The pool cover comes with duplex wire clip, cable tightener and installation tools for easy assembly..
Check Stock