ABN Winch Snatch Block Pulley Set - 2pk Recover Gear Offroad 4x4 Rope Pulley Block with 9 Ton 18,000lb Capacity
[Perfect for Off-Roading Adventure]: ABN 2-Pack Heavy Duty Pulley Snatch Blocks for Winches create optimal leverage to double the pulling power of your tow strap rope when recovering lawnmowers, ATV, and other vehicles.
[Fits Your Needs]: Add this cable pulley to your offroad recovery kit.
Works with 7/32 to 3/8-inch (5.1 to 10.2mm) steel cable or synthetic ATV tow strap rope.
[Make Towing Easier]: Rotate 9.2 by 4.9-inch (23.4 x 12.4cm) tree saver strap snatchblock pulley open to connect ropes or cables.
Steel material provides a breaking strength of 18,000 pounds (8,165kg).
[Prepare for Any Situation]: Snatch block for synthetic ropes allow directional change and navigation through difficult terrains.
Winch pulleys have an angled approach for obstacles like trees and rocks.
[Safety First]: Check towing winch accessories for damage or warping before use.
Grease ensures easy use with these tree cutting pulleys.
Use caution and stand back when using snatch rigging blocks.
Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (1 Pack)
✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 4 pcs 6*40mm self-tapping screws and 4 pcs 10*60mm yellow expansion pipes.).
✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipe....
Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (2 Pack)
✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 8 pcs 6*40mm self-tapping screws and 8 pcs 10*60mm yellow expansion pipes.).
✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipes in the....
scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit
【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Cable Pulley System Gym, Fitness LAT Pull Down Machine Weight Pulley System, Upgraded Cable Pulley Attachments for Gym, Pulley Cable Machine System with Pull down Bar, Tricep Rope Home Gym Workout
...ing & Stability】 : The upgraded loading pin fits for standard or Olympic weight plates, the Barbell Clip can keep the plates in place securely. it can bear a maximum weight of 220lbs. Pulley cables are made of high-strength PU material and steel wire, it can withstand strong friction and is not easy to break. For double security, we add 2 U screws to prevent the adjustable cables slipping, ensure your safe use..
【Easy to Assemble Fitness Equipment】 : Comes with durable stainless-steel rack, expansion screws and drill bits, it can be firmly installed to concrete wall and other tough wall. Just add weight plates, connect with the pulley cable and finish! Correct usage: First use an electric drill to drill a hole on the wall, and then drill the expansion screw into the hole, the end of the screw will be expanded and fixed on the wall. (Note:It is not suitable for installation on wooden walls.).
ZOENHOU 4 PCS M50 Loading 881Lbs / 400Kg Single Pulley Block, 304 Stainless Steel Single Pulley Roller with Rotatable 360°Pulley and Rings, Heavy Duty and Smooth Rope Pulley Block for Rope Lifting
SOLID & DURABLE - The single pulley block is made of high quality 304 stainless steel. It has a beautiful appearance. The single pulley adopts solid in design, very sturdy and durable, anti-rust, wear-resistance, and corrosion-resistant..
ROTATABLE 360° & SMOOTH - The silver pulley roller with rotatable 360° pulley and rings. It can prevent ropes, cables, wires from knotting, the pulley is smooth and is easy to use. The rope, climbing buckle, or maintenance hook can be easily passed through the top ring..
EASY TO USE & WIDELY USAGE - These rope pulleys will work very well for suspending antennas from trees and easy to adjust. You can also use them to hoist a metal pail full of stuff up and down, to raise and lower the bird feeder so much safer than getting on a ladder. They are smooth and don't get stuck..
HOW TO MAINTAIN - The rope pulley block is well made and very sturdy. It could easily accommodate many different diametral lines. To increase the more smoothness you can add some lubricant to the single pulley roller after using..
PACKAGE INCLUDE & PRODUCT SIZE - The package comes with 4 M50 single pulley blocks, the height of the small pulley is 2 inch (50.8mm) and the width 0.53inch (13.5mm). The inner width of the ring is 0.77 inch (19.5mm). The c....
10Pcs 304 Stainless Steel M15 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 10Pcs Spring Snap Hook
▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
▶Dimension◀: M15 Single Pulley Size: Length: 2.44in(62mm), Width: 0.83in(21mm), Max Load: 80 lbs(36kg). Spring Snap Hook: Max Load: 119 lbs(54kg)..
▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
▶Packaging Includes◀: 10Pcs M15 stainless steel single pulley, 10Pcs stainless steel spring snap hook..
2Pcs 304 Stainless Steel M25 Single Pulley Block, Wire Rope Hanging Wire Towing Wheel, with 2Pcs Spring Snap Hook
▶Material◀: The pulley is made of 304 stainless steel with strong structure, anti-rust, wear-resistant, high temperature-resistant, moisture-proof. It can be used continuously without fear of damage..
▶Easy to Use◀: Rotation cylinder head is solid, 360 degrees rotation to prevent rope from knotting, smooth turning wheel. You can quickly combine single pulley block and spring snap hook..
▶Dimension◀: M25 Single Pulley Size: Length: 3.31in(84mm), Width: 1.18in(30mm), Max Load: 330 lbs(150kg). Spring Snap Hook: Max Load: 330 lbs(150kg)..
▶Wide Applications◀: Widely used in tractive effort of steel wire rope or other rope tools, such as rope suspension traction in indoor and outdoor applications: camping, hiking, fishing, equipment gear, fitness, hanging wheel, mountaineering, etc..
▶Packaging Includes◀: 2Pcs M25 stainless steel single pulley, 2Pcs stainless steel spring snap hook..
