Best Double Socket Flat Taper

TEKTON 3/8 Inch Drive x 24 mm 6-Point Socket | SHD12124

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.19 in., Socket End Diameter: 1.26 in., Drive End Diameter: 1.26 in., Socket Well Depth: 0.6 in..
Check Stock

[14 Pack]- Pop 3M Socket Sticky Adhesive Replacement with 2pcs Alcohol Pads, 3M VHB Double Sided Tape for Grip Holder and Magnetic Phone car Mount

  • [14 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount..
  • [Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect..
  • [Extra Strong & Durability, Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70°F and 100°F..
  • [Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides..
  • [Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long..
Check Stock

TEKTON 1/2 Inch Drive x 33 mm 6-Point Socket - SHD22133

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.78 in., Socket End Diameter: 1.74 in., Drive End Diameter: 1.42 in., Socket Well Depth: 0.87 in..
Check Stock

M MAXIMUMCATCH Maxcatch Troutlite DT Fly Fishing Line 3/4/5/6F 90FT with 2 Welded Loop (DT5F)

  • The Trout LT (Light Touch) double taper line features a long, fine front taper for the lightest of presentations.
  • PVC layer outside the braided line is a high-tech coating allowing for dependable floatation and durability.
  • Braided multifilament core for lower memory.
Check Stock

GoHawk Waterproof Motorcycle 5V USB 2.1A Charger Adapter Kit Cable, 12V Car Cigarette Lighter Socket Outlet, 7/8-1 1/8' Handlebar Clamp ATV UTV Handlebar Clamp for Phone Camera

  • Waterproof 5V 2.1A USB Port Charger with 12V Car Cigarette Lighter Socket Outlet for motorcycle Harley Honda Yamaha Kawasaki Suzuki UTV ATV 4 Wheeler Polaris.
  • Included 3 x rubber inserts for 7/8, 1, 1 1/8” handlebar sizes. Included 3M double sided 3M tape for flat surface mounting..
  • Included 1x DIY USB rubber cover for waterproof while in use. Fast smart charging for all Smartphones, Camera, GPS, Tablet.
  • IP54 Waterproof and dust-proof cover for USB and Cigarette Lighter Socket. Great for outdoor usage.
  • 60” long power extension wire with built-in fuse to ensure reliability and safety. Ring terminal for easy installation.
Check Stock

TEKTON 3/4 Inch Drive x 2 Inch 6-Point Socket | SHD32051

  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry applies force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fastener.
  • Overall Socket Length: 2.8 in., Socket End Diameter: 2.67 in., Drive End Diameter: 1.89 in., Socket Well Depth: 1.38 in..
Check Stock

Capri Tools Deep Impact Socket, 3/8-Inch Drive, 6-Point, Metric (24 mm)

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.58 in., Socket End Diameter: 1.3 in., Drive End Diameter: 1.19 in., Socket Well Depth: 0.67 in..
Check Stock

SPKLINE SDS-Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, 13/16'X 6-11/16'(20x170mm), 10mm Diameter Shank Fits Bosch Dewalt Milwaukee Hilti and Other SDS-Plus Rotary Hammer Drills

  • Industrial grade professional ground rod driver for 5/8″ and 3/4″ ground rods.
  • One-piece design with proprietary heat-treatment process, fully hardened high quality steel body and thick metal walls meet the demands of frequent use and deliver increased life and durability.
  • 6-11/16″(170mm) long and 13/16″(20mm) diameter socket opening, 3″(76mm) deep inside the nest, accommodate ground rods up to 3/4″ (19mm) in diameter. A taper on the bottom of the driver throat makes contact with the top of the ground rod. It helps to minimize the mushrooming of the rod versus a flat-bottom driver.
  • Standard SDS-Plus shank (10mm Diameter) is compatible with Bosch, Dewalt, Milwaukee, Hilti, Makita, Hitachi and all other brand SDS-Plus system rotary hammers and Hammer Drills.
  • Fantastic work saver. It saves you a lot of pounding with a manual hammer. Heavy duty, high efficiency, precise and effortless, perfect for commercial and industrial applications. Product is packed in a handy transparent plastic tube that is durable and convenient to store and carry.
Check Stock

1/2 Inch Drive x 21 mm Deep 6-Point Socket

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 3.02 in., Socket End Diameter: 1.1 in., Drive End Diameter: 1.1 in., Socket Well Depth: 1.34 in..
Check Stock

1/2 Inch Drive x 34 mm Deep 6-Point Socket

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 3.02 in., Socket End Diameter: 1.78 in., Drive End Diameter: 1.74 in., Socket Well Depth: 1.34 in..
Check Stock