Best Draft Beer Can Opener

Red Gas Line Air Hose,Co2 Tubing Hose ID 5/16

  • 3.Widely Use: The Gas Tube specified to beer industry standards. Perfect for your home brewing needs, regulator, gas manifold, kegerator, Cornelius Keg, pin or ball lock keg, beer draft systems or other equipment.
  • 1.Include: 10ft Red Gas Hose ID 5/16″ OD 9/16″.
  • 5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..
  • 2.Feature: PVC Food Grade Material. 1/4″ Wall thickness of The Gas Hose can endure a higher pressures of a draft system and allow a kink resistance for a tight bend radius.
  • 4.Tips: Sometimes the Gas Hose is very hard to connect, you can put the hose in the hot water, then connect the equipment.
Check Stock

HYYF Golf Club Bottle Opener ,Golfer Beer Gift Novelty Item for The Golf Lover and Beer Enthusiast,Made From Zinc Alloy-100g, Silver, 7.3 x 3 inches, (B-04)

  • 【Easy to Use】: Only 3 steps: 1) Place the opener on the bottle.
  • 2) Push down the opener along with bottle.
  • 3) Loose the opener, and pop the cap off from the bottle.
  • 【Small and Potable】: This bottle opener is very small, portable and convenient. It is very suitable for camping trip, traveling, party or outdoor in summer to drink beer. This bottle opener also can be used as wine bartender tool as bar or restaurant..
  • 【Fastly Open Bottle Cap】:Compare to the traditional opener, this new version opener can open the cap quickly and easily about hundreds of bottles in a few minutes. It is a good helper for drinking beer, kitchen, bar, restaurant..
  • 【Professional Design】: This opener is designed beautifully. So, the bottle opener is a perfect gift for party, birthday or Christmas. Novelty design with magnet makes it use durably. Carried bottle opener will be convenient to open beer bottle cap lid..
  • 【What You Get】: You will get: silver stainless steel automatic bottle opener: 1pcs. Only press and pop the bottle lid cap quickly. No dagame for cap is good for bottle cap collector..
Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...l domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components yo....
Check Stock

Adulting Note Pad (To Do List)

  • PROFESSIONAL CRAFT - The motorbike bottle opener is made of durable zinc alloy, heavy-duty design with anti-rust coating, smooth surface texture, non-slip handle, humanized solid structure and compact size, offering safe and convenient use. The die-casting process makes the beer bottle opener more durable, which keeps the original bronze color unchanged. Undeformable, this opener will serve you for a long time, helping you easily open the cap..
  • CLASSIC DESIGN - Show your unique taste and passion for motorcycle culture with a cool bottle opener of a retro motorcycle shape. The attractive design, classic pattern and the details about the motorcycle elements are all delicate enough to get you and others happy with this pop bottle opener. The size of opener is about 12.6×5.1×0.5cm. Not big but eye-catching, not heavy but high quality. 86g weight is convenient for you to carry, store..
  • WIDE USE - This beer bottle opener suitable for standard bottle caps, soda bottles, beer bottles, etc. Not only be used as a cool beer blade for indoor places like homes, kitchens, clubs, restaurants, offices or bars, but also as a fun bottle opener for outdoor parties, barbecues, picnics, etc. As a good helper for professional bartenders, restaurant waiters and bar servers....
Check Stock

24 Pack Stainless Steel Flat Bottle Opener Heavy Duty Bartender Beer Openers Rubber Coated Beer Bottle Opener 7 Inch Beer Can Opener for Men Women Bar Kitchen Restaurant Party Supplies, 6 Colors

  • Reliable and Sturdy: the bottle opener is mainly made of quality stainless steel and rubber, not easy to deform or corrode, comfortable to hold and reusable, which you can use with confidence for a long time.
  • Sufficient Quantity: you will receive 24 packs of beer bottle openers in 6 different colors, and the ample quantity can meet your use and replacement needs in daily life or bar and you can share with others.
  • Proper Size: the beer opener measures approx. 18 cm/ 7 inches in length, and the width is about 4 cm/ 1.57 inches, paired with rubber coated hand which is easy to handle and nice for most beer bottles.
  • Widely Applied: the flat beer bottle opener can help you easily open beer and soda bottles, simple and practical, and it is suitable for dinner parties, bars, restaurants, holiday parties, barbecues, travel, home, kitchen, and more.
  • Easy to Store: this bar beer bottle opener has a round hole at the bottom of its handle for easy hanging and can also be applied as a key ring to hang your keys on for a lot of convenience to carry and use.
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...ey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions....
Check Stock

Beer Tap Handle and Two Liquid Chalk Markers Set - Wooden Keg Taps Handles for Standard Faucets and Kegerators with Reusable Chalkboard - Suitable for Home Brew Bars Kegs and Draft Beer

  • STYLISH – The minimalistic, classic design of Panooplia Beer Tap Handle adds color and character to your home bar. With a smooth finishing and a....
  • REUSABLE – Save time and money with reusable chalk beer tap handles you won’t have to replace every time you change kegs. With our draft beer....
  • PERFECT FIT – Standard kegerators, beer faucets, or beer towers – you can customize them all with these handsome kegerator tap handles. Designed....
  • 2X CHALK MARKERS – Buy your chalkboard tap handle today and grab two liquid chalk markers for free. Easy to use and a breeze to erase, they write....
  • GUARANTEE – Panooplia Beer Tap Handles for Kegerator are crafted from the finest materials. If you don’t love your draft beer handle, just send it....
Check Stock

Mewum Bicycle pumps,Bike Pump Ergonomic Bicycle Pump with Large Pressure Gauge Bicycle Floor Pump fits Valve for Road Bike, MTB, Hybrid, Balls, 200PSI

  • ✔ 【 2 in 1 Multi-function Tool 】Perfect for professional bartenders or home use. The bottle opener opens bottle of the beer, soft drinks, soda water, coca cola. The pop can opener opens pop-top beer and soft drinks.
  • ✔ 【 Magnetic Cap Catcher 】The build-in magnet catches the caps during use. No need to collect them by hand any more..
  • ✔ 【 Easy Storage to Avoid Loss 】With build-in magnet, this beer opener could be attached to refrigerator to avoid loss. You'll never worry about going hunting for a bottle opener again!.
  • ✔ 【 Easy Picking-up 】The tilt-up tail is designed to pick the beer opener up easily from the fridge or counter by scraping the tail with one of your fingers.
Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

  • ...domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you’ll need to quickly and ....
Check Stock

Motocross Off Road Street Dirt Bike Motorcycle Beer Bottle Opener Gifts for Men Rider Valentines Boyfriend

  • Functional Opener:the novelty beer opener is a brilliant Christmas birthday valentines Father's Day, Anniversary,Retirement gift, Housewarming Present.
  • Off Road Bike gifts:the metal beer gifts opener cool gadget for your father, husband, boyfriend or harley davidson fans, you can use it as a opener for beer and soda bottles,families, restaurants, clubs and bars, also classic as souvenir for motorcycle enthusiasts.
  • Portalbe Design: suitable size 2* 4.2 inches,light in weight and compact in size, won't add more burden or take up much space, convenient to carry and store, you can easily put it into your hand, pocket or kitchen drawer.
  • Durable and sturdy: motorcycle ideas beer openers are made metal alloy,with good workmanship of surface, making it more natural and long-lasting, serving you for a long time.
  • Package contents: 1 pieces in EVA black gifts box to avoid any damage for unique vintage men gifts for Father's Day.
Check Stock