(Combo Pack) Exact Replacement Rotating Rigid Pipe Adapter and Termination Adapter (Black) - With 3” Hub and 3” Bayonet Lug Fittings
COMBO PACK 2-PIECE PIPE ADAPTERS - Inside is 1 piece rotating rigid pipe adapted and 1 piece termination adapter. Both are black and manufactured according to OEM specifications.
ROTATING RIGID PIPE ADAPTER - This is an RV waste outlet adapter that rotates for a quick connection. This is a standard-sized 3-inch RV twist-on adapter with bayonet hooks that connects the waste outlet to a 3-inch pipe.
TERMINATION ADAPTER - Designed for drain fittings connecting to a sewer hose or cap. One nub end supports a 3-inch twist-on connector with bayonet hooks while the female slip hub end accepts 3-inch ABS pipes that require gluing.
3” HUB AND 3” BAYONET LUG FITTINGS - The rotating rigid pipe adapter has a 3-inch female slip hub and 4 bayonet hooks while the termination adapter has a 3-inch female slip hub and 4 bayonet lug nubs fittings.
MADE OF BLACK ABS PLASTIC - Ensure that you are using the correct type of glue when connecting either an ABS or PVC pipe to the adapters’ female slip hub.
Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.
275 330 G IBC Tote Fittings Tank Water Tank Connector 2 Inch Fitting Adapter IBC Tonnage Connection Joint and 3/4 Inch Coarse Thread(2)
Package included: you will get 2 pieces of IBC fittings tanks, sufficient quantity can meet your daily needs and replacement, which is easy to connect tons of hose or hard pipe.
In addition, each joint is equipped with a LDPE gasket.
Note: IBC fittings tank is coarse thread.
Appropriate size: our product is suitable for standard IBC containers with an inner diameter of 6 cm/ 2 inches and a thread pitch of 0.4 cm/ 0.15 inches.
It provides a foundation for garden hoses and can extend the service life of existing valves.
Note: Please check the size carefully before buying.
Not easy to leak: 275 330 G IBC tote bag drain connector provides a stable and leak-proof connection. The tote bag water tank connector has gasket seals to prevent leakage. You can use it with confidence (Note: Before use, please check if there is LDPE gasket to avoid Water leakage. If there is water leakage, you can use sealant tape to stabilize the leaking part).
Quality materials: 275 330 G IBC tote fittings tank is made of quality plastic materials, which can withstand irritating chemicals and acidic water more than brass, and this durable material can ensure long-term safe use and is suitable for drinking water.
Convenient installation: tote fittings tank is suitable for fast connect....
SEWER JETTER - 50 FT DRAIN CLEANER for Your GAS Pressure Washer by SewerFlex
50 FT sewer jetter PULLS ITSELF deep into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and....
Helps you unclog 3" to 4" ID MAIN DRAINS, LANDSCAPING DRAINS and SEPTIC LINES that have long-sweep drain elbows and fittings..
Powerful NOZZLE has THREE BACK JETS to power the sewer jetter through drains, and ONE FORWARD JET to help break up dense clogs. IDEAL for cleaning and....
Assembled COMPLETE and READY TO USE - includes 50 foot drain cleaning POLY HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas....
BEFORE ORDERING read and follow all IMPORTANT INFORMATION in the Description section. NOT COMPATIBLE with electric pressure washers..
NDS 900BKITRTL1PK Square Kit with 2-Opening Catch Basin, 2 Adapters, 1 Outlet Plug, and 1 Plastic Drain Grate, 9-Inch, for Lawns, Landscaped Areas, Black
PREVENTS COSTLY DAMAGE: Use the 9x9 catch basin as part of a complete drainage system to collect and direct heavy flows of water to drain pipe and take it away to a discharge point downstream.
FITS A VARIETY OF DRAIN PIPES & FITTINGS: Connects to 3 in. & 4 in. sewer and drain, single-wall corrugated, triple wall, and DWV/Sch. 40 pipes, using included outlet adapters.
additional outlet adapters sold separately for 6 in. & 8 in. pipes.
EASY INSTALL: Keyed side openings easily lock outlet adapters in place, with a cutout guide on the bottom for an additional keyed opening if needed.
SOIL-TIGHT FIT: Soil-tight outlet adapters connect to pipe for a secure fit—no tape or glue required.
included plug fits inside outlet adapter and seals opening to direct flow of water.
KIT INCLUDES: 9 in. Catch Basin Drain with 2 side openings and cutout guide for bottom opening, 2 Outlet Adapters, 1 Plug, 9 in. Square Plastic Black Grate.
Additional knock-out weep holes on bottom of basin.
Kraus KHU100-32 Standart PRO 16 Gauge Undermount Single Bowl Stainless Steel Kitchen Sink, 32 Inch & STC-2 Cappro Removable Decorative Drain Cover, Stainless Steel
Product 1: Made of stainless steel | Corrosion and rust-resistant, will not fade over time | Set includes Sink, Drain Assembly with Strainer, Protective Bottom Grid & Kitchen Towel.
Product 1: Product dimensions | Overall – 32” L x 19” W x 10” D | Min cabinet size – 36” | Bowl – 10” D x 30” L x 17” W.
Product 1: A best-selling stainless steel sink paired with a commercial kitchen faucet for an in-demand high-end look.
Product 1: Resilient and easy to clean commercial-grade satin finish resists corrosion and rust & matches most kitchen appliances.
Product 2: Large removable decorative drain cover for kitchen sink.
Product 2: Conceals garbage disposal and waste fittings.
Product 2: Open sides ensure optimal drainage and allows water to drain easily even when sink is full.
Product 2: Durable stainless steel construction with corrosion-resistant finish.
Five Oceans FO1867 White Straight Thru-Hull Fitting Connection for Hose, 1-1/2 inches, Injection Molded Polypropylene, Barbed, Resist Harsh Conditions
This Five Oceans Thru-Hull Fitting Connection for Hose is ideal for scupper, sink drain, and bilge pump overboard discharge. Hose Diameter: 1-1/2 inches (38mm).
It is made of tough injection molded Polypropylene plastic that will resist sunlight, salt water, oil, gasoline and most common marine chemicals.
Nylon plumbing fittings like this cost less than similar fittings made of Marelon or Bronze..
Excellent resistance to UV and weather-aging.
Thru-Hull Connections For Use With Hose Are Not Recommended For Use Below The Waterline. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor
...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
