Best Drainage Flexible Couplings Pipe

Apache 98108802 Rubber Heavy Duty Contractors Industrial Water/Garden Hose, 150 psi Maximum Pressure, 25' Length, 3/4' ID

  • Contractors industrial water/garden hose.
  • 100 Percent rubber, heavy-duty MGHT x FGHT solid brass couplings and one bend restrictor.
  • Resists sunlight, abrasion, kinking and cracking.
Check Stock

Sinoblu 1/2 to 1/2inch Flexible Spider Couplings for Servo Stepper Motor Diameter 30mm Length 35mm

  • Size:Diameter 30mm Length 35mm/Diameter 1.18inch Length 1.38inch. Bore 12.7-12.7mm/0.5-0.5inch. Type: Plum shaped.
  • Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
  • Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
  • Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
  • Wide Range of Usage: Flexible Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Apache 98108804 3/4\ x 50' Industrial Rubber Water Hose Assembly with Male x Female Garden Hose Thread Fittings

  • Contractors industrial water/garden hose.
  • 100 Percent rubber, heavy-duty MGHT x FGHT solid brass couplings and one bend restrictor.
  • Resists sunlight, abrasion, kinking and cracking.
Check Stock

Apache 98108809 3/4\ x 100' Industrial Rubber Water Hose Assembly with Male x Female Garden Hose Thread Fittings,Black

  • Contractors industrial water/garden hose.
  • 100 Percent rubber, heavy-duty MGHT x FGHT solid brass couplings and one bend restrictor.
  • Resists sunlight, abrasion, kinking and cracking.
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...is adopted on our 8 LB commercial grease interceptor, whose flow rate is about 4 GPM (15.14 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is ....
Check Stock

Canomo Silver Finish Make-A-Lamp Kit 3-Way with 8 Inch Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair…

  • Include a 3-Way turn knob socket, 8 inch silver detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Silver finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or silver lamp parts..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
Check Stock

Swan Products LOLH5806FM Hose Reel Leader Hose with Male and Female Connections 6' x 5/8", Green

  • Leader hose with 5/8" diameter and male/female fittings.
  • Hose leader by Swan Products, LLC, 5/8" x 6' M/F with kink-resistant design.
  • Hose leader by Swan Products, LLC, 5/8" x 6' M/F with crush-resistant couplings.
  • Hose leader with crush-resistant couplings for long-term use.
  • Hose leader with flexible construction for easy maneuverability.
Check Stock

Canomo Antique Brass Finish Make-A-Lamp Kit 3-Way with 8 Inch Lamp Harp, 2 Pieces 12" Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Contains two each: 1/8-IP x 12″ threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts..
  • Antique brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Include a 3-Way turn knob socket, 8 inch antique brass detachable harp, 8 foot UL listed clear cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
Check Stock

Canomo 2 Sets Lamp Making Kit Lamp Wiring Kit with 8 Inch Harp, 2 Pieces 12\ Lamp Pipe, and All Parts Needed and Instructions for DIY Lamp Design or Repair, Black

  • Package Include 2 Packs: 3-Way turn knob socket, 8 inch black detachable harp, 8 foot UL listed blak cord set, finial, lamp pipe kit and all hardware. Includes instructions for wiring..
  • Three-Way Socket Lamp Making/Repair Kit is made of high-quality metal which ensures premium quality and a classic look. The Lamp Kit is UL and CUL safety rated for Indoor location use.
  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Contains two each: 1/8-IP x 12" threaded pipe, 1/8-IP couplings, 1/8-IP locknuts, 1/8-IP knurled locknuts, washers.
  • Great for DIY your own lamp and for repair and replacement of broken, tarnished or lamp parts..
Check Stock