Best Driveway Drain Grate

Neodrain Square Shower Drain with Removable Tile insert Grate 4-Inch Brushed 304 Stainless Steel With WATERMARK&CUPC Certified Includes Hair Strainer

  • √ Square Shower Drain Size: 4" length, 4" width, The diameter of outlet is 2 inches. 35 L/min high flow capability. With Neodrain 2 in 1 grate.
  • √ Shower Floor Drain Material: AISI 304 Stainless Steel, Made of strong 304 grade Stainless Steel, Brushed Surface, Brushed Steel Finished protect....
  • √ Can be used in kitchen, bathroom, garage, basement and toilet.
  • and also Preventing unpleasant smell, insects and mice from entering the house..
  • √Threaded Adaptor with rubber O-ring aids adjusting the height of Square drain and securing the Square drain to the flange, leak-proof and....
  • Fits US No-Hub coupling, 2" Shower Drain Base can be Purchased Separately: PVC for B06XSQF1VR, B07DNQFBM5.
  • ABS for B07GYQLXVF, not compatible with....
Check Stock

NDS Square Catch Basin Drain Grate, 9 in., Black Plastic

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 9 in. square catch basin, riser, or low-profile adapter to drain excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 9 in. Catch Basin Drain, 9 in. Riser, and 9 in. Low-Profile Adapter . 121 GPM flow rate. 39.5 sq. in. open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • drain grate fits on catch basins, risers, and low-profile adapters and can be secured with screws. 9 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit on 9 in. catch basins, risers, and low-profile adapters.
Check Stock

Tile Redi RT3660L-MB-RB36-KIT Base'N Bench Shower Pan, Matte Black

  • BASE, BENCH, & FLASHING: Pre-pitched shower pan with integrated curb and splash walls.
  • also includes 12-inch wide bench and flashing.
  • READY TO TILE: Install tile directly on shower pan and bench surface to customize base to the look and feel of your bathroom.
  • EASY TO INSTALL: Install pan in mortar base.
  • framing for bench not included, see instructions for further details.
  • DRAIN & PLATE INCLUDED: Features 2-inch left PVC drain and designer matte black drain grate.
  • DIMENSIONS: Base'N Bench Installed Size: 72" W x 36" D x 17.75" H.
Check Stock

MONSINTA Kitchen Sink Grid and Sink Protectors, Stainless Steel Sink Grids for Bottom of Kitchen Sink, 26' x 14' with Rear Drain for Single Sink Bowl

  • Stainless Steel Sink Grid Dimension: 26″ X 14 1/16″..
  • Sink Protector with Rear Drain Location..
  • Kitchen Sink Grate, Sink Grid, Stainless Steel Construction..
  • Sink Bottom Grid, Sink Grate as Drying Rack For Glassware and Crockery..
  • Sink Grids for Single Bowl Kitchen Sinks..
Check Stock

NIREU 6 Inch Square Shower Floor Drain with Removable Cover Grid Grate, SUS 304 Stainless Steel, Watermark&CUPC Certified, Chrome Finished

  • 6 inch length, 6 inch width square drain fits perfectly most square tiles. 2 inch bottom outlet, 60L/min high flow capability, fits US NO HUB Drain Base System, solving bathroom drainage problem effectively..
  • The square drain made of US ASTM standard 304 Stainless Steel, base flange made of ABS construction, surface Chrome finished, protect against corrosion, scratches and rust for long-lasting durability. WATERMARK&cUPC certified..
  • The removable cover grid grate with 64 square holes design, it can prevent hair and larger objects from falling into the sewer and enhance water flowing. The embedded design offer a invisible and seamless look on your floor..
  • Easy to install with clear instructions. Base flange connects to drain pipe, fit standard U.S. plumbing connection. It can be used in bathroom, kitchen, pool, lavaroty, garage, basement, toilet etc..
  • The square drain kit includes removable hair strainer/trap and lifting hook/key, you can easily lift the cover for cleaning..
Check Stock

DasMarine 10Inch Draft Beer Wall Mount Drip Tray - Stainless Steel - No Drain

  • 【Material:】Heavy duty, 304 grade sanitary stainless steel.
  • 【Function:】Drip tray for your single tap draft beer system, collects faucet drips and pint glass run-off..
  • 【Easy To Clean & Install:】Removable, easy to clean drain grate, flat louvers, using two screws( not included) to mount to the wall or door.
  • 【Package Included:】1 x 10"L x 6"W Mount Drip Tray, No Drain.
Check Stock

AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler

  • Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
  • Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the water goes straight to the ground and not in the bed of the truck.
  • Cooler drain plug kit include 1 drain plug hose connection for YETI Tundra, cooler accessories drain plugs compatible with YETI Tundra coolers, Roadie coolers and Tank coolers.
Check Stock

Kitchen Sink Protector White Sink Grate Insert Grid Sink Bowl Rack Rust Prevent (10.5' x 12.5')

  • This sink grate is made of white coated rust resistant heavy duty metal.
  • No more scratches on your sink. Protects kitchen sink and dishes from scratches.
  • Can be used as a sink rack for drying dishes.
  • Sink grid comes with traditional center drain for easy installation and drain access.
Check Stock

Neodrain 32 Inch Rectangular Linear Shower Drain with Brick Pattern Grate, Brushed 304 Stainless Steel Bathroom Floor Drain,Shower Floor Drain Includes Adjustable Leveling Feet, Hair Strainer,Black

  • 【 Linear Shower Drain Size】- The size of linear drain is 32 inches in length and 2.75 inches in width. The diameter of outlet is 2 inches. Shallow 'V' Profile to Aide Flow of Water to Shower Drain Outlet.It can be achieved high displacement with an average of 50.5 L/min (without filter mesh), Enhanced internal slope virtually eliminates water remaining in the channel..
  • 【Material】- The linear shower drain is made of high quality AISI 304 stainless steel, Our linear shower drain is also made of special production technology to prevent corrosion and rust. It has passed With WATERMARK&CUPC test certification to ensure product safety and functionality.
  • 【Easy Clean】- Open the Grate from both sides of the linear shower drain by using a lifting hook, very convenient for regular cleaning. And the strainer can filter hair and particulate impurities effectively..
  • 【Easy Adjustment & Installation】- The shower drain have two leveling feet, can adjust height as need. Fits US standard no hub drain base system, simply push the 2” shower drain down to the threaded adapter to install the drain. NO HUB drain base not included, can be purchased separately: : PVC for B06XSQF1VR, B07DNQFBM5.
  • ABS for B07GYQLXVF, not compatible with Schluter Kerdi Shower Kit.
Check Stock

NDS 1212 Square Catch Basin Drain Grate, 12 in, Green

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in Low-Profile Adapter. 162 GPM flow rate. 53.1 sq. in. of open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • cover fits on catch basins, risers, and low-profile adapters and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock