Best Drywall Anchor

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 1/4"-20 UNC-threaded bolts.
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

48 Pieces Heavy Duty Toggle Bolts, Wall Anchors & Screws for Drywall, 1/4 Inch, 1/8 Inch, 3/16 Inch (3 Sizes)

  • Screws and Drywall Anchors Heavy Duty: These anchors and screws can be used on hollow brick, gypsum board, cement fiber board, wood board, and other hollow materials.
  • Perfect For: The heavy duty drywall anchors and screws can be used to install lighting fixtures, curtain rods, and photo frames.
  • 3 Sizes: The largest drywall anchor screw measures 1/4 x 3 inches, the medium size measures 3/16 x 3 inches, and the smallest measures 1/8 x 2 inches.
  • Durable Material: These toggle bolts and anchors are made with a plated carbon steel and coating which is perfect for hanging heavy items on drywall such as coat racks and flower pot..
  • What’s Included: This set includes 24 of 1/8 inch wall anchors.
Check Stock

The Hillman Group 370342 Blue Conical Plastic Anchor, 10-12 X 1-Inch, 100-Pack

  • For general applications and light duty use in brick, hollow block, concrete, drywall or plaster.
  • Ribs prevent anchor from turning in the hole during installation.
  • Split in the anchor helps ensure expansion on 2 opposing sides.
  • Provides superior rust and corrosion protection.
Check Stock

Drywall Anchors(20pcs), Drywall Anchors Heavy Duty,Wall Anchors and Screws for Drywall, Concrete Anchors 270 lbs in 1/2' Drywall for 1/4'-20 UNC Fastener Size

  • 【Professionals Anchor】Our anchor is with massive range of applications and fully tested.It is the ultimate answer to some of the most awkward and demanding tasks that professionals face when fixing to hollow materials。.
  • 【Save Money and Time ! 】Our anchor can be installed in less than 10 seconds thanks to its pivoting head and strap design..
  • 【Premium Quality and Durable】:This anchors are engineered from impact and chemical resistant material,which are very durable..
  • 【Versatile Uses】Our anchor is a versatile plasterboard drywall anchor fixing with unrivalled strength and is suitable for all types of plasterboard,hardboard, plywood, sheet metal, chipboard, mdf, lath.
  • 【Buy Risk Free】:All Our anchor are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge..
Check Stock

Drywall Anchors(12pcs), Drywall Anchors Heavy Duty, Wall Anchors and Screws for Drywall,Concrete Anchors 240 lbs in 1/2' Drywall for 3/16'-24 UNC Fastener Size

  • 【Professionals Anchor】Our anchor is with massive range of applications and fully tested.It is the ultimate answer to some of the most awkward and demanding tasks that professionals face when fixing to hollow materials。.
  • 【Save Money and Time ! 】Our anchor can be installed in less than 10 seconds thanks to its pivoting head and strap design..
  • 【Premium Quality and Durable】:This anchors are engineered from impact and chemical resistant material,which are very durable..
  • 【Versatile Uses】Our anchor is a versatile plasterboard drywall anchor fixing with unrivalled strength and is suitable for all types of plasterboard,hardboard, plywood, sheet metal, chipboard, mdf, lath.
  • 【Buy Risk Free】:All Our anchor are backed by Lifetime warranty.Simply email us back if our product ever fails you and we'll mail you a new original replacement free of charge..
Check Stock

Juasky 60Pcs Metal Self Drilling Anchors,Heavy Duty Anchors and #8×1-1/4\ Screws Kit for Drywall, Wood

  • ► Made of zinc, anchors can be drilled directly into the drywall instead of pre-drilling. Anchors and screws can be easily removed and reused..
  • ► The inner threads of the anchor fits closely with the dimensions of the screws, being strong and firm..
  • ► The kit includes 30 pcs 1/2"*1-3/5" metal anchors for drywall, and 30 pcs #8*1-1/4" Phillips screws..
  • ► The heavy duty drywall anchors hangs up to 50 lbs for hanging..
  • ► These wall mounting hardware are boxed for storage, which is organized and clean, easy to use and recycle..
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

Drywall Anchor kit - Hollow Wall Anchors with Screws ,self-Drilling Hollow Wall Anchor for Drywall,Nylon - Plastic - Buildex,all-60 pcs Anchor 30+Screw 30

  • Best Quality Drywall Anchors, Pre-drills precise hole in gypsum wall board - No hole preparation required.Starts easier than other self-drilling drywall anchors.
  • The plastic material anchors are very durable and not easy to be broken, drywall self-drilling screws kit is made of high quality stainless steel, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using and prolong screws lifespan..
  • The split in the ribbed anchors expand on two opposing sides as you tighten the screw , increased holding power,Anti-rotation structure design of the expansion sleeve, tighten the screw will not be followed in the drilling rotation..
  • These drywall anchors and screws is perfect for hanging a wall shelf in fairly soft drywall. You can use the kit to hold your blinds or shelf, and the ribs on the plastic drywall anchors prevent the anchor from turning in the hole during installation..
  • Application:Drywall self-drilling screws kit is suitable for gypsum board, benzene board, decorative panel, asbestos board, hollow board solid board, etc. for curtain installation, lamp inst....
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100 anchor with out bolts

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

ClosetMaid 6609 SuperSlide Shelf and Hanging Bar Wall Bracket, White, Pack of 1

  • SUPERSLIDE BRACKET: For use with ClosetMaid SuperSlide wire shelving and hang rod (sold separately).
  • PRELOADED BRACKET: Preloaded wall bracket with anchor easily mounts to the side wall.
  • WIRE SHELVING SUPPORT: Supports front lip of shelving and hang rod where they meet the side wall.
  • DRYWALL INSTALLATION: Designed for For drywall applications.
  • EASY TO INSTALL: Easy to install with pre-loaded pins.
Check Stock