ORICO 5 Bay Docking with Clone USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD/SSD Max Support 5X 16TB [6558US3-C]
【80TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 80TB (5x 16TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable ....
Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches
Cost-effective 2-pack provides a spare power cable for new installations or repairs.
Keep a spare in your IT toolkit or at the test bench.
DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inat....
2.5 3.5 Dual Slots USB 3.0 SATA IDE HDD All in 1 Docking Station Card Reader
Supports 2.5"/3.5" dual SATA and IDE hard drives simultaneously. All in 1 dual bay docking station allows an easy accessing with two 2.5 inch & 3.5....
High speed USB 3.0 interface with data transfer rate up to 5Gbps, 10 times faster than USB 2.0. It supports hard disk clone, high speed one to one....
Tool free installation, no driver needed, plug and play, support hot plug. It features 6 slots for multiple memory cards（for SD/MMC/MS cards, TF....
External HDD Hard Drive Easily and quickly transfer files from HD to PC or card readers, all-in-one HDD docking with one touch backup(OTB) and one....
We promise 1 year limited warranty and worry-free lifetime technical support by Hfong. In the use of products during any product issues, please e-mail....
GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)
Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
X825 Case,please refer to ASIN: B093WYWVRX.
Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
OS compatiable: All Raspberry Pi operating systems.
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
Hard Drive Enclosure RSHTECH USB 3.0 to SATA Aluminum External Hard Drive Dock Case for 3.5 inch HDD SSD up to 16TB Drives Support UASP RSH-339
Broad Compatibility: The new version of RSH-339 Computer hard drive enclosures support 3.5 inch SATA I/II/III /HDD SSD up to 16 TB hard drives.....
Multiple protection: Aluminum housing, Plug and Play, no drivers required. The external hard drive case with independent 12V/2A power supply using....
6Gbps Data Transfer Rates: The SATA interface of the USB 3.0 enclosure supports 6Gbps max transfer speed and UASP (USB Attached SCSI Protocol). To....
Automatic Sleep Function: Entering sleep mode after 10 minutes of data access inactivity. Electronic power button, long press 3 seconds to turn it....
Better Cooling 3.5 enclosure: Aluminum HDD case with vents in the bottom, you can dock the HDD enclosure in the ABS bracket vertically to get better....
Everything But Stromboli SSD Enclosure Case for SATA 2.5 Hard Drive/Solid State Drive USB 3.0 Cable Tool Free Type Works with Samsung PNY Kingston SanDisk 9.5mm x 2.5 Inch HDDs or SSDs
This single unit 2.5 Inch Hard Drive Enclosure is perfect for your business, IT Department, home computer, or gaming set-up. Box Includes (1)....
Easy, Tool Free installation – simply open case and insert 2.5 Inch SATA HDD or SDD. This product is designed for standard size disk of max 9.5mm....
SATA III Enclosure for SSD or HDD: Enclosure is optimized for Sata III, backward compatible with Sata I and Sata II.
USB 3.0 Enclosure for SSD: 3.0 USB Speed Cable to connect your SSD/HDD from your SATA Enclosure to your USB port on laptop, desktop, Windows, Mac,....
Enclosure for Samsung SSD, Kingston SSD, PNY SSD, SanDisk SSD - Works with/Compatible with Samsung SSD 860 EVO 2.5 Inch SATA III Internal (250GB,....
WEme USB C 3.0 to SATA External Hard Drive Dock Docking Station, SSD HDD Disk Duplicator Cloner for Dual Bay 2.5 3.5 Inch SATA I II III, Support UASP and Auto Sleep and 2X 12TB, Black
WEme SATA Dock supports capacity up to 36TB (2x18TB).
Support Win7 / 8/10 / XP / Vista / Linux / Mac Os. It can be connected to desktop / laptop / TV / PS4 / Smart Box as home entertainment video storage..
WEme USB-C Drive Dock equipped with Type C cable, better match your Type C thunderbolt Notebook, Laptop & PC. USB 3.0 (5Gbps) Superspeed transfer rate and UASP supported. Copy 1G file only takes 4 seconds..
WEme HDD SSD Cloner support Online duplicator between hard drive and PC & Offline Clone Function without connecting the computer. Tool-free & Driver-free, support Hot-swapping..
Supports all 2.5" 3.5" SATA (I/ II/ III) HDD and SSD. Perfectly compatible with HDD from Seagate/ WD / HGST etc, and SSD from Intel/ Samsung/ Toshiba/ Jmicron etc..
Smarter user-friendly design, automatically enter Sleep Mode to protect your hard drive after 30 minutes no operation.
Synchronized system operation with Disk Station. Screwless drive tray design reduces the time needed for system setup.
Applied models: DS1817+, DS1517+, DS1817, DS1517. Compatible Drive Type-3.5 inch SATA HDD, 2.5 inch SATA HDD, 2.5 inch SATA SSD. Note- It is strongly recommended that you only install drives listed on your device's compatibility list. Storage pool and volume creation processes may fail when using unverified drives.
