Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Used for separating rubber supports from exhaust hanger brackets (i.e. tailpipe, exhaust piper and muffler) with 25 degree offset handles for work in hard to reach areas..
The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports.
Compatible with Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
Features slip-resistant comfort grips, squeeze to remove a rubber support from an exhaust hanger..
Made of high carbon steel material provide maximum strength, durability, and leverage.
8 inch (2.1cm) opening fits around metal hanger brackets and against rubber hanger grommet.
8MILELAKE Exhaust Tail Pipe Cutter, 3/4 Inch to 3 Inch Universal Tube Cutting Pliers Carbon Steel Chain Exhaust Cut Off Tool 15 Blades for cutting tailpipes and exhaust pipes both on and off the car
【APPLICATION】The exhaust tail pipe cutter is designed for cutting tailpipes and exhaust pipes both on and off vehicle use. Use tool to cut copper, PVC, iron pipe, etc with diameters of 3/4 to 3 inches (19-76mm).
【HIGH QUALITY】The chain muffler pipe cutter is made of high quality carbon steel, the surface has been anti-rust treatment and strict testing methods, strong , sturdy and durable, not easy to damage.The ergonomically non-slip handle of the exhaust and tailpipe tube cut off tool is made of plastic and steel and is comfortable while cutting..
【HIGH PERFORMANCE】Universal carbon steel tubing cutter features with 15 blades to cut pipe quickly and effectively. Each roller has a cutting wheel that provides smooth tracking, so only a quarter turn is needed for complete cut..
【PERFECT DESIGN】The exhaust tailpipe tube cutting Pliers works well in areas that are hard to reach, pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. Lubricating the cutting wheel of the exhaust cutter before use will make the cutting operation smoother and prolong the service life of the item..
【SERVICE GUARANTEE】High quality products and services have always been our purpose. If you encounter any problems in the proces....
AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On
Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating
Dimension: 1.75-2.25 inch adjustable inlet diameter.
universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
effectively anti-corrosive, avoid rust and deformation for enhanced durability.
Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
TOTALFLOW 415633 Black 2-Chamber Muffler 09-18 1500 Direct Fit Exhaust 2009-2018 Dodge Ram 1500-409 Stainless Steel (Two
CHECK PRODUCT DETAILS CHART BELOW FOR OTHER SIZES..
Fits 09-18 Dodge/Ram 1500 Direct Fit Exhaust Muffler for 2009-2018 Dodge Ram 1500 Trucks with 5. 7L Engine and Factory Dual Tailpipe Option ( Two Chamber Muffler ).
Constructed with durable 409 Stainless Steel, fully MIG welded for long life.
Made from heavy gauge material. TOTALFLOW is a USA - California based company.
8MILELAKE Exhaust Pipe Hanger Remover Pliers Compatible for VW Porsche BMW Mercedes Mini Cooper Audi
The 8MILELAKE exhaust hanger removal pliers is used to remove rubber exhaust system hangers (i.e. tailpipe, exhaust piper and muffler), with 25 degree offset handles for work in hard to reach areas..
The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports, like fit for Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
Simply squeeze the pliers slip-resistant handles to force the bracket from the rubber support.
The exhaust hanger removal plier is made of high carbon steel, which has strong hardness and durability.
Comfortable soft vinyl grips with anti-slip function, easy to use and save efforts.
[Effective Noise Reduction]:The universal removable exhaust pipe muffler effectively reduce the deep sound while reducing motorcycle noise pollution..
[Removable] 51mm motorcycle exhaust pipe DB silencer, suitable for most motorcycles, installed at the rear of the exhaust pipe, is a detachable adjustable muffler for easy installation..
[Low-noise tailpipe]: The exhaust pipe can increase the exhaust pressure, reduce the tail-end noise, make the exhaust smoother, improve the power, and provide you with a good driving experience..
[Stainless Steel] The exhaust muffler is made of high quality stainless steel, whichis resistant to high temperature and rust and can be used for a long time..
[Safety And Environmental Protection] During the riding process, the muffler at the end of the exhaust pipe can clearly hear the whistle of the vehicles around the road, which is conducive to safe driving and reduce noise pollution..
AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On
Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
