Best Dual Measurement Display

DC 12V Electronic Temperature Controller Programmable -50 to 110 Degree Celsius Heating/ Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor 2 Pieces

What will receive: you will get 2 pieces of DC 12V 200 mA temperature controllers, the measurement temperature is from -50 to 110℃(-58 to 230℉),....
Dual color LED display: this digital thermostat control module of dual color LED display, which show the measured temperature (red) and set....
Waterproof design: the NTC (10K 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according....
Reliable to use: the electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 0.1....
Wide application: the electronic thermostat can be widely applied in intelligent home and industrial equipment, suitable for household appliances,....

【Practical Design】VA colour reverse display screen,high-definition display, The zero line of fire can be identified by itself and judged based on the display area and the buzzer sound..
【Precise measurement】NCV non-contact voltage measurement, Built-in highly sensitive voltage probe, the screen displays the signal strength..
【Easy to operate】Lighting function, The illuminating lamp, and the probe are combined into one, which is convenient for measurement and more worry-free, Data retention, Auto-shutdown function..
【Overload protection】true RMS measurement, frequency response is 50H-800Hz, DC1l000 or 700v AC peak value..
【Powerful Functions】AC voltage measurement, DC voltage measurement, Short buzzer diode, Capacitance measurement, Resistance measurement, zero live wire..

DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
EASY USER RE-CALIBRATION back to factory setting with no special fixture required.
RESOLUTION: ±0.1° (0° & 90°), ±0.2° for 1° to 89°, switchable display between degrees (°) or slope (%).
STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
Auto invert display when gauge is upside down . BUZZER SOUNDS at 0 degree and any set angle.
HOLD BUTTON to allow user freezing display for ease of reading. Measurement Range 0° ~ +/- 90° x 4 (360°).

Certificate of Traceability from the National Institute of Standards and Technology (NIST) to achieve the highest possible levels of measurement quality.
Dual display simultaneously displays Humidity and Air Temperature, Wet Bulb, or Dew Point.
Data Hold freezes the reading on the display.
Conserve battery life with Auto Power Off with disable.
Built-in Humidity calibration using optional calibration solutions.

Certificate of Traceability from the National Institute of Standards and Technology (NIST) to achieve the highest possible levels of measurement quality.
Simultaneously displays Humidity and Air Temperature or Wet Bulb or Dew Point plus Type K or IR Temperature on Dual backlit LCD display.
30:1 IR Thermometer with laser pointer and 0.95 fixed emissivity.
Min/Max recalls highest and lowest readings.
Data Hold freezes the display for easy viewing.
Auto power off with disable conserves battery life.

Product 1: Optical Resolution (Distance-to-spot) is 12:1.
Product 1: Features include dual-laser targeting.
Product 1: Drop protection to 6.6-feet (2 m).
Product 1: Measurement Range: -22-degrees to 752-degrees F (-30-degrees to 400-degrees C).
Product 2: Magnet inside base of probe to easily attach to vents.
Product 2: Range -40 to 572-degrees F (-40 to 300-degrees C).
Product 2: User selectable Fahrenheit and Celsius temperature measurements.
Product 2: Backlit display for easy viewing in low light.

Dual input measures up to 40 Inch of water gauge. NOTE .001wg resolution below 9.999 Inch. Ruggedized with sturdy metal fittings.
Scales include Added Pascal's as a measurement scale, Wag, mbar and PSI. Dynamic Min/Max that can be reset at any time.
Data hold, Auto power-off and Back-lit display.

【High-Precision Measurement】 The reptile digital thermometer, built-in sensitive sensor, accurately measures the temperature changes in the terrarium, incubator, brooder, and breeder, and provides clear readings on the LCD screen. (No humidity monitoring function).
【Easy to Install & Beautiful】 The powerful suction cup can be tightly attached to the flat position of the glass container. This reptile temperature monitor is small and beautiful, without the trouble of external wiring, which perfectly fits all kinds of pet habitat cage and tank decorations..
【Precision & Dual Mode】High-precision electronic temperature sensor, temperature measurement range: 14°F~122°F (+/- 2°F). Dual-mode design, Fahrenheit or Celsius display mode can be switched freely by one key..
【Satisfaction Guarantee】Your satisfaction is our most important goal, and we offer a 30-day money-back guarantee. If you have any questions about the product, please feel free to contact us, we will reply within 24 hours and solve the problem quickly.

True-RMS for accurate measurement in all applications.
Dual Input Type K Differential Digital Thermometer.
Easy-to-read Display, Magnetic Mount for -hands-free operation, Auto Power Off to save battery life.
-328 to 1, 832 DEG F -200 to 1, 370 DEG C.
Includes 2 K-type Temperature Probes (ATT29A), Protective Carrying Case, Manual, 9V Battery.

Dual input Differential measurement up to 80.27 inches of water column within range.
inh2o, PSI, bar, mbar, kpa, inhg, mmhg, oz in, fth2o, cmh2o and kgcm.
Magnetic mount, backlit display, and Zero button.