Best Dual Wall Tubing

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • ...ink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our store, like 3/4", 1" ,1.5", 2". our worry-free 2....
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

The Paris Apartment: A Novel

  • 【What You Get:】 10 Pcs per pack of 1/0 Guage (AWG) 3/8″ ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉), thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY ....
Check Stock

10pcs 2/0 Awg - 3/8' (M10) Sanuke Wire Lugs Ring Terminal Connectors Ends Heavy Duty for Battery Cable Lug Wire Electrical Eyelets with 3:1 Dual Wall Adhesive Heat Shrink

  • ☆『What You Will Get:』In this set, we offer 10pcs 2/0 Awg - 3/8" (M10)ring terminals copper lugs tube end termination ring terminals for your work, 5Pcs black and 5 red 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube..
  • ☆『High Quality:』All the ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity. All the 3:1 shrink tube is well made of high quality material, thick and durable.They are both for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable..
  • ☆『Reliable and Easy to Use:』Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • ☆『Wide Applications :』These Copper Lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc.Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
  • ☆『Customized Protector:』Our copper lugs are made out of a high-grade copper to protect against corrosion can be soldered or crimped and fi....
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

2 Pcs 1 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black & Red)

  • ...ink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 1" in diameter large heat shrink tubing black and red (Note: it is 1" in round diameter, but not 1" in width). Other sizes also available in our store, like 1/2", 3/4" ,1.5", 2". ....
Check Stock

Pro Physician Single Head Cardiology Stethoscope

  • Really nice entry level Cardiology Stethoscope with Pressure sensiitve diaphragm..
  • Best bang for your buck of any stethoscope being sold on Amazon and we back it with a lifetime warranty..
  • Unique design that combines the acoustic response of a traditional bell and diaphragm into a convenient one-sided chest piece. Bell-type low frequency response is achieved by simply holding the chest piece in place with light pressure. Diaphragm retaining rim protects patient skin from cold metal surface..
  • Beautiful High Quality Stainless Steel Chest Piece. DUAL tubing in one design for the price of an economy single tube stethoscope. Thicker dual lumen tubing helps to insulate against background noises..
Check Stock

Tube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine

  • 【FITS MODEL】- Fits 5/8″ and larger tubing.
  • 【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
  • 【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
  • 【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
  • 【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.
Check Stock

3rd Generation Hydraulic Tubing Bender for Round Tubing, Hydraulic Pipe Bender for Roll Cage Tubing, 1.50 Inch Round Dimple Die

  • Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components.
  • Incremental marks cast into dies makes it easy to reproduce bends.
  • For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing.
  • Comes with one aluminum die in the size of your choice 1", 1-1/4", 1-1/2", 1-5/8" or 1-3/4".
  • 7" bend radius dies are also sold individually if you need to bend a different size tubing later.
Check Stock

Buyers Products 8591000 Fender Mounting Kit (Fender Mounting Kit,One Side)

  • Made from heavy wall, structural steel tubing.
  • 30.5" Long mount covers all dual rear wheel applications.
  • More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products-it's amazing what Buyers Products can do for your truck.
  • We Do Things The Right Way: We design products like we're building them for ourselves, because we are.
  • Our teams are staffed with engineers and experts who know how to make a product exceptional.
  • Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products.
Check Stock