iJDMTOY Smoked Lens Amber Full LED Strip Sequential Flash Side View Mirror Turn Signal Blinker Light Assembly Compatible With Honda Accord CR-V HR-V, etc
Please note that not all Accord/CRV/HRV have the side mirror indicator light strips, please make sure yours do have the lamps in order to upgrade them with LED!.
Direct replace the driver passenger side factory equipped single LED emitter on/off only side mirror lamp turn signal lights to a unique JDM style dark smoked lens with full LED dynamic sequential blink assemblies (Replace OEM # 34350-T0A-H01 34300-T0A-H01).
When you use the turn signal light, the outside LED side marker lighting will flow/scoll from the center to the side.
Installation tips: carefully remove the mirror glass to access the screws/clips inside.
Release them to further take off the cap/cover, and then directly replace the dynamic flashing LED sidemarker strip assy underneath the cover. After the installation, please lock the vehicle, wait about 5 sec, and then turn on the engine to allow the onboard computer to reset itself before testing function..
iPower GLDUCT8CX4 4-Pack 6 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, Silver
size: 6inches (diameter) x 8feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)..
Applications: kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), grow tents, etc..
Ducting feature: built-in steel wire for reinforcement and long lasting performance. Flexible length for inline fan.
when not in use, it takes up little space..
Fireproof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance..
Note: although the ducting is easy installation, violent installation is prohibited. With 4 pair of 6inch metal clamps made from stainless steel..
iPower GLDUCT4X25CX12 12-Pack 4 Inch 25 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose for HVAC Ventilation, Silver
size: 4inches (diameter) x 25feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)..
Applications: kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), grow tents, etc..
Ducting feature: built-in steel wire for reinforcement and long lasting performance. Flexible length for inline fan.
when not in use, it takes up little space..
Fireproof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance..
Note: although the ducting is easy installation, violent installation is prohibited. With 12 pair of 4inch metal clamps made from stainless steel..
iPower Flexible 4 Inch 8 Feet Aluminum Ducting 4 Layer Protection Dryer Vent Hose for HVAC Heating Cooling Ventilation and Exhaust 2 Clamps Included PVC 4 in 8ft Black
Variety of applications: perfect for HVAC ventilation, grow tents air circulation, green houses and grow rooms air intake and exhaust or light fixture....
inner material: aluminum foil. Temperature range:....
Premium material: high-quality aluminum foil, high temperature resistant and corrosion resistant, long lasting. PVC thick layer on this ducting can....
Four-layer design: four-layer design (PVC layer + aluminum foil + PET + aluminum foil) makes it more durable and resistant to leaks, tears, and cuts.
Flexible ducting: the aluminum foil duct tube can bend in any direction, allows you to accommodate most space restrictions. Flexible length for inline....
TerraBloom 12\ (315mm) Air Duct - 8 FT Long, Black Flexible Ducting with 2 Clamps, 4 Layer HVAC Ventilation Air Hose - Great for Grow Tents, Dryer Rooms, House Vent Register Lines
12" (315mm) ID LIGHTPROOF DUCTING : This flexible aluminum duct is designed to fit 12.3" (313mm OD) fans and filters. Thick layer of Black PVC on this ducting prevents light leaks and improves puncture resistance. Works with exhaust and intake fans, carbon filters and hooded lights which are 12-12.3" in diameter.
4-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. Under the Black PVC layer our ducting is built with 2 layers of Aluminum Foil With a layer of PET and Steel Wire Helix to preserve the shape.
FLEXIBLE AND EASY TO USE: Our 12 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 12 Inch Clamps to make the installation a breeze.
12" (315mm) DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 12 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moistu....
10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings
D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
__________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....
iPower GLDUCT8X25C 8 inch 25 feet Non-Insulated Flex Air Aluminum Foil Ducting Dryer Vent Hose for HVAC Ventilation with 2 Clamps, 1-Pack, Silver
size: 8inches (diameter) x 25feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)..
Applications: kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), grow tents, etc..
Ducting feature: built-in steel wire for reinforcement and long lasting performance. Flexible length for inline fan.
when not in use, it takes up little space..
Fireproof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance..
Note: although the ducting is easy installation, violent installation is prohibited. With 1 pair of 8inch metal clamps made from stainless steel..
iPower GLDUCT16CX2V1 6 Inch 16 Feet Non-Insulated Flex Air Aluminum Ducting Vent Hose for Grow Tents, Dryers, 2-Pack, HVAC Ventilation, 2 Pack
size: 6inches (diameter) x 16feet (length) when fully extended. Temperature endurance range from 0 ~ 185°F (-18℃ ~ 85℃).
Fireproof coating: flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
Ducting feature: built-in steel wire for reinforcement and long lasting performance. Flexible length, when not in use, it takes up little space.
Applications: kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), grow tents, etc..
Note: although the ducting is easy installation, violent installation is prohibited. With 4 pair of 6inch metal clamps made from stainless steel.
iPower Flexible 4 Inch 8 Feet Aluminum Ducting 4 Layer Protection Dryer Vent Hose for HVAC Heating Cooling Ventilation and Exhaust, 2 Clamps Included, Gray
Variety of applications: perfect for HVAC ventilation, grow tents air circulation, green houses and grow rooms air intake and exhaust or light fixture cooling, kitchen cooking air exhaust, bathroom smell and moisture exhaust, etc.
inner material: aluminum foil. Temperature range: -22°F~212°F(-30℃～100℃).
Premium material: high-quality aluminum foil, high temperature resistant and corrosion resistant, long lasting. PVC thick layer on this ducting can prevent light leaks. Include a pair of 4 inch stainless steel duct clamps.
Four-layer design: four-layer design (PVC layer + aluminum foil + PET + aluminum foil) makes it more durable and resistant to leaks, tears, and cuts.
Flexible ducting: the aluminum foil duct tube can bend in any direction, allows you to accommodate most space restrictions. Flexible length for inline fan, quick and easy to set up.
