Best Durable Tap And Drill Set

BOSCH BDT1024 10-24 Plug Tap and No. 25 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

KnKut 18 Piece National Course Tap/Drill Bit Set

  • No Center Punch or Pilot Hole required for drill bit.
Check Stock

POWER GRIP Grab-it Gadget featuring 19 Telescopic mechanic fingers Made by ODii

  • The product is a 4PC Power Extractor Set.
  • Purpose of use for Handtools & Tool Organizers, threading-tap-extractors.
  • Bell-shaped drill head allows tool to be pivoted inside drill hole helping to stay on center. No pilot hole required..
  • no walking or wandering. No grinding, center punching required..
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

TOPEC Tap Bit Set, 3-in-1 HSS Titanium Coated Drill Tap Combination for Titanium Coated Drill Tap Combination, 13 PCS SAE/Metric threading tap drill bit set with 1/4 Inch Hex Shank, and Quick-Change Adapter

  • ❤【3-IN-1 MULTIFUNCTIONAL COMBINATION DRILL TAP】 They are three-in-one operation, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic. One-step processing, greatly save processing steps and time costs, improve working efficiency. Deepening the chip flute helps to remove chips and debris on the tap, reducing friction and heat, thereby achieving a faster and cooler drilling process..
  • ❤【PREMIUM MATERIAL】These high-quality taps are made of high-speed steel(HSS) and have high hardness to achieve sharpness, fast execution and maintain strength and efficiency. It can be applied to all wood, copper, iron and part of thin stainless steel is also applicable. The surface is treated with titanium alloy to improve the cutting performance and wear resistance of the drill , and extending the service life..
  • ❤【 HIGH VERSATILITY&CONVENIENCE】The product portfolio includes SAE and metric sizes, can meet your various need. Each tap drill is engraved with its size, you can choose the accurate bit without any difficulty.The convenient 1/4" (6.35mm) hex shank has a tapered end to prevent excesssive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a por....
Check Stock

BOSCH BDT516F18 5/16-18 Plug Tap and Size F Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

Big Gator Tools SDGMINI MINI V-DrillGuide®

  • 21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64"..
  • Covers all tap drill sizes for tap sizes: 10-32 down to 0-80..
  • The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!.
  • Heat treated for durability. Side alignment marks allow accurate hole locating..
Check Stock

THINKWORK Combination Drill Tap & Tap Bit Set 3-in-1 Titanium Coated Screw Tapping Bit Tool for Drilling Tapping Countersinking with Quick-Change Adapter 13 PCS SAE/Metric

  • 【 Exquisite workmanship】Durable taps are made of high speed steel, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 【Ergonomic design】The product portfolio includes SAE and metric sizes, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 【High efficiency 】 They are taps with drilling function, three-in-one operation, which can drill, tap, deburr and counter holes on copper, brass, aluminum, metal sheet and plastic at the same time, so as to quickly , Complete work completely, greatly save processing steps and time costs, and improve work efficiency..
  • 【Various sizes】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC.
  • 6 metric-M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • 【After-sales service】If you encounter any prob....
Check Stock

T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws

  • T-Handle Tap Wrench Solid Jaw 3 Piece Set.
  • Set of 3 Piece - Jaw Opening Ranges 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2".
  • The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications.
  • Unused PartsDesigned for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same.
Check Stock

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

  • High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
  • Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
  • Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
  • Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
  • Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..
Check Stock