Best Durable Welding Electrode Clamp

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder....
Check Stock

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

  • 1.300Amps Welding Electrode Holder American Style.
  • 2.With 35-50 quick plug. Easy connected..
  • 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
  • 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.
Check Stock

ZenStyle Arc Welding Machine DC Inverter 160AMP 120V/230V Dual Voltage IGBT Stick Arc Welder

  • 120V / 230V / 60Hz Input current at rated output 20 Amp 160 Amp / 23V / 60% Duty Cycle / ETL Listed.
  • 〖Multipurpose〗This welder is suitable for welding mild steel, stainless steel, aluminum and other kinds of metal.
  • It is great for welding, maintenance, repair, light industry and more.
  • Package includes electrode holder and 5 ft cable, work clamp and 6.7 ft cable, input power adapter cable and plug.
  • 〖Portable Design〗Compared with other conventional large bulky welder, this lightweight portable welder is designed compactly, and has a carrying handle for easily transit and storage, allows you to take it to anywhere you need.
  • 〖Convenient Yet Safe〗This inverter has the ability to be plugged into a 110V wall socket with household current instead of high voltage.
  • Its over-voltage protection, under voltage protection, over current protection, over load protection designs ensure you are safe when you use it.
  • 〖Ideal Choice〗The inverter welder switches AC power to DC then incorporate a stepdown transformer to produce the proper voltage and current, ideal for high frequency MMA welding.
  • It is a ideal welder for both of professional use and personal use because of its features and strong ability.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Weldpro Omni 210 Dual Voltage 115V/230V AC/DC Multi-Process Welder - MIG/Flux Core/Stick/ACDC High Frequency TIG with Pulser and Aluminum Balance/Frequency Control 3 year warranty welding machine

  • Weldpro’s new 200 Amp Multiprocess welder now includes AC/DC TIG Welding with Hi Frequency Start and Pulse Control.MIG/Stick/ AC&DC TIG/ Flux Core/ Aluminum Spool Gun all new design with FOOTPEDAL and TRIGGER SWITCH..
  • Dual Gas inputs for dedicated Argon and MIX/CO2 tanks. MIG gun and TIG torch can be connected simultaneously for ease of switching between MIG and TIG.All new easy to use, multifunction data display and controls that make changing welding processes and parameters simple even for beginners..
  • 200A Welding Current across ALL PROCESSES allows welding of various thickness material and different types of base material..
  • Included VRD feature with Hi Temp and Overload protection with indicator. User adjustable inductance.Operates off 115V/230V standard household current.
  • What’s Included: 10ft NT1 MIG gun, 12ft CK 17-12-RSF Flex head TIG torch, 5AWG 10ft 200A electrode holder, 5AWG 10ft 300A T-shape earth clamp CGA 580 gas flow meter with 4.5ft gas hose, Power adapter, 0.030’’-0.035’’ knurled drive roll, 0.024’’-0.035’’V-Groove drive roll, AK-3 accessory kit, Weldpro CK17 torch protection cover, Trigger button for TIG torch, Weldpro SSC control foot pedal.
Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

S7 200Amp MIG Welder,110V&220V 3 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine

  • ️★Multi-Functions In One Machine: IGBT Full 30-200Amp(Max)With Digital Display, Reliable Quality And Stable Performance.Suitable For MMA, Lift TIG, Flux MIG, Gas MIG,Big Enough To Handle 2 To 10 Pound Rolls Of Wire.
  • ️★110V/220V Powerful Machine: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5KG Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode.
  • ️★Include:MIG Gun(2.8M), Ground Clamp And Holder (2M),220V To 110V Adapter , Drive Roller Wheel,Contact Tips,Gass Nozzles,Welder Operation Manual . Processes Recommended-MIG-Cast Iron,Copper,Brass,Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron,Copper,Brass,Titanium.
  • ️★Synergic Control,Automatic Change Of The Voltage & Wire Feeding Speed By Adjusting The Amperage Or Choosing Different Thicknesses.The MIG-200is Capable Of True lift TIG(Need Buy Extra Tig Lift Torch,Not Included Inside Product) Welding As Well As Stick Welding ,The MIG-200 Is An Intuitive Synergically Designed MIG/MAG/ Flux Core/ARC/Lift TIG Welding Machine Safety, Automatic Protection Function For Over-Current, Over-Voltage And Over-Heating.
Check Stock

Lincoln TIG Kit for Power MIG 210MP K3690-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock