ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter
【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans..
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans..
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..
Chassis Fan Hub SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard 12V 3-Pin
✪ SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of....
✪ Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and....
✪ Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis..
✪ 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW),....
✪ EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the....
Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)
❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
ARCTIC P12 PWM PST RGB (3 Pack) - 120 mm PWM case Fan Optimized for Static Pressure, case Fan, semi-Passive: 0-2000 RPM, 12V 4 pin RGB LED - Black
ANALOG RGB ILLUMINATION: The 12 RGB LEDs placed along the fan hubr and the transparent rotor with its closed design provide a uniform and rich illumination.
EASY TO COMBINE: Both the fan and RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans.
OPTIMIZED FOR STATIC PRESSURE: Thanks to the high static pressure, the fan guarantees efficient cooling even with increased air resistance. Suitable for use on heat sinks & radiators.
0-2000 RPM: The speed of the fan can be throttled down to standstill via PWM. This allows for silent operation in IDLE while guaranteeing the highest performance when needed.
DZS Elec 4Pin 1 to 3 Ways PWM Fan Splitter Cable Black Sleeved Fan Power Extension Cable 4Pin Female to 3X 4Pin Male 27cm/10.5 inches
4Pin 1 to 3 Ways PWM Fan Splitter Cable, to realize 3 fans powered by 1 interface with speed regulation..
High quality high density black sleeved cable, 24AWG, length is approx. 27cm / 10.5 inches..
The fan adapter has only one connector with a yellow RPM speed/tachometer line. Make the motherboard receive only one fan RPM speed reading without being confused by multiple fan readings..
The cable is compatible with 3-pin and 4-pin PC fans..
Can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
DZS Elec 4Pin 1 to 4 Ways PWM Fan Splitter Cable Black Sleeved Fan Power Extension Cable 4Pin Female to 4X 4Pin Male 27cm/10.5 inches
4Pin 1 to 4 Ways PWM Fan Splitter Cable, to realize 4 fans powered by 1 interface with speed regulation..
High quality high density black sleeved cable, 24AWG, length is approx. 27cm / 10.5 inches..
The fan adapter has only one connector with a yellow RPM speed/tachometer line. Make the motherboard receive only one fan RPM speed reading without being confused by multiple fan readings..
The cable is compatible with 3-pin and 4-pin PC fans..
Can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
MEIRIYFA 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub 8 Way Splitter 12V Speed Controller with 6 Pin Power Port
[Expand Fan Interfaces] – Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans..
[Function] – Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time..
[Widely Compatible] – For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor..
[High Performance] – The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance..
[Glue Fixation] – The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..
