Best Easy Thread Repair

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

Lead Wire Combination Patch Plug 2\ Patch 24/BX Xtra Seal 13-673 5/16

  • Thread repair kit containing, tap, installation tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock

Powercoil 3534-7/16K UNF 7/16-20 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Powercoil 3532-7/16K UNC 7/16-14 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Large-Eye Stitching Needles for Leather Projects with Clear Bottle, 20 Pack

  • 20 Pieces stitching needles set: needle length is 5.2 cm, 20 pieces craft needles in the clear bottle which keep the needle secure and organize well.
  • Easy to handle: with extra long eye, peaked tip and thick shaft, the stitching needles are easy to thread yarn through even without a threader.
  • Sturdy large-eye needles: made of stainless steel, they are sturdy enough for leather working, and some thick clothes or shoes repair, vinyl upholstery mend.
  • Smooth surface: the steel material is polished enough to give a smooth stitch.
  • The embroidery hand needles can weave in ends and sew up seams on knit and crochet projects.
  • Large eye hand needles: these needle with large eye is easy to thread by hand even for a person with poor eye sight and poor coordination with her handsDescription.
  • Outus metal stitching needles for leather projects with clear bottle, 20 pack.
  • 20 Pieces craft needles store in one clear bottle. Large-eye stitching needles length are 5.2 cm, they are good for leather working, and some thick clothes or shoes repair..
  • With extra long eye, peaked tip and thick shaft, the stitching needles are easy to thread yarn through even without a threader..
Check Stock

Powercoil 3521-16.00K M16-1.5 Thread Repair Kit (1 Kitper Pack)

  • Thread repair kit containing drill, tap, installation tool, tang break tool, quantity of inserts and instructions.
  • Used to repair damaged or worn out threads.
  • Used to create new stronger threads in original equipment.
  • Provide a permanent, corrosion and wear resistant internal thread.
  • Powercoil kits contain the wire thread inserts, tap, installation tool.
Check Stock

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

SWANLAKE 166PCS Thread Repair Tool Kit,HSS Drill Helicoil Repair Kit Metric M5 M6 M8 M10 M12

  • 1.This 166pcs Thread Repair kit is for repairing damaged or stripped Internal screw threads..
  • 2.Set includes :5 installation tools,5 break pin tools,5 twist drills ,5 taps,1 hex key and 145pcs wire thread inserts (M5,M6,M8,M10,M12)..
  • 3. The installation tools in this kit is made by high-speed steel for superior handling.one HSS tap for each size, one HSS drill for each size, 2 Insert tools for each size, Thread Inserts for each size..
  • 4.The kit has 166 Pieces, all made according to professional standard.its suitable for engine repair and other automotive applications..
  • 5.It packed in a convenient steel carrying case, easy and fast in storage..
Check Stock

TIME-SERT M12 X 1.75 Metric Thread Repair Kit 1217

  • 【WIDELY USED】: Our drill and tap set creates a stronger internal thread in soft metals and protects tapped threads against wear and damage. It is suitable for repair stripped or damaged internal threads and widely used in automotive and plumbing applications..
  • 【SAE & METRIC】: Standard 261pcs thread repair kit, includes HSS drill bits, wire thread inserts, STI taps, installation and tang break tools. 1/4.
Check Stock