PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better..
Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical..
Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc
Updated 1S HV 660mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.
C-rate up to 90c burst 180c better than other 80C lipo battery, compact size of 61 * 18 * 7 mm, many charges on these with no sagging.
The weight of the 660mAh 1S Lipo battery only 81g, it is 81g lighter than the 450mAh 1s lipo battery, but better performance than it.
This was a huge upgrade from the EMAX 450mah 1S batteries, your flight time can upwards of 5 mins on these batteries compared to a previous max of 2 mins.
Fit for EMAX Tinyhawk series, like TinyHawk 2, EZ Pilot, TinyHawk S. Also work with other 1S micro FPV racing drone.
D1S - PHILIPS 4300K XenStart OEM HID/Xenon Replacement bulb 85415C1 35W DOT Germany - Pack of 1 by ALI
✅ CHECK! The bulbs MUST come with 3-YEAR warranty marking on Multi-language package w/ 16-digit Security Label for Product authenticity verification | This is NOT COA sticker (COA version is available at different price w/o warranty).
D1S (As long as your vehicle has D1S type bulb, this is compatible | OEM 4300K, 3200LM, 85V 35W Direct Factory Replacement | 4300K is ‘Standard White’ Color (if you want cooler color, you need to find 6000K or higher) | Note: All HID lights discolor to get whiter/bluer over usage & dim down. When comparing a NEW bulb against your OLD bulb, the NEW bulb may look warmer in color, which is normal. Replacing in PAIR is suggested.
Newest Release from PHILIPS Made in Germany | Generally OVER $150 per bulb at dealer | DOT approved, 100% Street Legal | replace in pairs for optimal performance. | Friendly warning: Due to lower price we offer, some buyer over-looks at it and find multi-languages on package to be strange. Please note that this product comes in Multi-languge package.
Extremely Long Life with precise light distribution & consistent performance | DOT approved, 100% legal for On/Off road use | Replace in pairs for optimal performance | When you have light failure, try working side bulb on non-working side to d....
DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module Replacement Compatible with Microsoft Xbox One
DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module Replacement Compatible with Microsoft Xbox One.
Tips: This is DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module replacement to replace your old damage DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module, don’t include instructions, please install it by a professional technician..
Broken your DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module, don’t need to change new machine, just buy this item and replce your damage DG-6M1S Blu-Ray DVD Disc Drive Deck w/ HOP-B150 Laser Lens Module, let your Device work again again..
Compatible with: Microsoft Xbox One (Please check your machine model before your purchase).
Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
HIGH BRIGHTNESS: WinPower D1S xenon HID replacement bulbs produces 3200 lumens of light, super bright to illuminate the dark spot on the horizon, right in the centre of the road, the light was even and symmetrical, clearer vision can greatly reduce the traffic accident rate..
LONG LIFE: The D1S HID headlight bulbs use electronic excitation gas emitting, consume 35W of electricity, greatly reduce the load on the vehicle electrical system. Lasts over 3000 hours lifetime over 5 times than halogen bulbs..
EXACT ALIGNMENT: Each D1S HID bulb is laser aligned to the base during the manufacturing process to ensure a tight beam pattern. With a blend of xenon gas that is measured to the proper color temperature and will not fade over time..
RELIABILITY: D1S xenon bulbs run at 85 volts, when the vehicle power supply system and battery failure, the ballast automatically shut down to stop working. An enhanced distance focus with a reduced glare for both clear side road and down road view..
EASY INSTALLATION: Plug N Play. Designed to fit your factory bulb housing without any wiring or modification necessary. Please avoid touching the bulbs with your fingers when installing. Please note that these D1S bulbs come with 12 months warranty..
【Upgrade Version】Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.
【Small Size】Small size of 64 * 15 * 6 mm,The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it.
【Better Performance】This 1S lipo tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops.
【Longer Flying Time】Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
【Caution】As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
Panoyu D1S LED Headlight Bulbs 100W, 6500K Cool White 380% Brighter D1R D1C LED Bulb, 12000 LM High Low Beam 100% Error Free Xenon Headlights Replacement, Direct Plug and Play to HID Ballast, 2 Packs
【SAFE DRIVING】Brightness is increased to 12,000 lumens.
color temperature is optimized to 6500K cool white.
D1S headlight bulbs are 380% much brighter than stock xenon headlights bulbs, providing an additional 200 feet of farther and wider illumination, allowing drivers to avoid dangerous hazards 3S earlier and faster..
【LONG LIFESPAN】Instead of the natural heat dissipation of HID bulbs, the cooling method uses a combination of an all aluminum fin sink housing and a 10,000 PRM noiseless turbo fan for efficient heat dissipation. Perfect replacement of hid headlight bulb! The D1S bulb can guarantee a longer working life of over 30,000 hours..
【GREAT ADAPTION】The internal circuitry is completely insulated.
the protection level has been raised to IP68 waterproof.
the D1S bulb is better able to resist the intrusion of rain, snow, wind and dust and damage to the engine caused by high temperatures, thus reducing the impact of your driving in extreme weather and bad conditions..
【EASY CONNECTION】Instead of external plugs or requiring any extension cables, D1S bulbs have been converted to an integrated 1:1 OEM design. It connects directly to the HID ballast, allowing you to install it in 5 minutes or less. D1S headlight bulb is a single lamp and ....
Tenergy LiPO Bag for Charging and Storage and 1S-6S Digital Battery Pack Charger for Li-Fe/Li-PO/NiCd/NiMH Packs Balance Charger Discharger w/Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply
Bundle which includes Tenergy's TB6 balance charger with a large lipo bag and small lipo bag..
Tenergy balance charger/discharger recharges power for all of multiple battery pack types. Use with NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
TB6 digital battery pack charger is compatible with NiMH/NiCd 1.2V-18V (1S-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiPO/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA 2V-20V..
The included Tenergy fire resistance lipo battery bag is made with triple-layered flame retardant protection material capable of withstanding up to 2000°F and meets the rigorous international standards for flammability set by UL 94.
Tenergy TB6 balance charger discharger includes 12-month warranty..
