Best Edm Tubing

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

Raindrip 100050100 1/4\ 50' White Tubing, 0.25 inches x 50 Feet

  • Slowly waters the soil around your plants for complete root zone hydration.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
  • connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
  • As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
  • Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
  • Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
  • Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
  • in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.
Check Stock

Speedway Motors Speedy Notcher Roll Cage Tube Joint Tubing Notcher with Instructions, Built-In Protractor Gauge with Degree Angle, Premium Holesaw Blade

  • Fantastic tool and is a ‘must have’ for making custom fabricated tube chassis, roll cages and header/exhaust work.
  • Works well with 9/16" to 2" O.D. tubing, useful in joining different sized tubing.
  • Ideal for anything that you need to put an angle onto the end of either round or square tubing for tight notches and perfect fit.
  • Incorporates and includes a built-in protractor gauge to quickly and easily set the degree angle of the tubing where end matches up to mating tubing.
  • Takes the challenges and difficulty out of making 40° to 90° angled tubing joints and makes angled tubing joints quickly and accurately.
Check Stock

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter , Gray

  • Cuts up to 1” schedule 40 pipe and 2” copper tubing,.
  • Tubing capacity is 5/8" - 2-1/8" and 1" pipe..
  • Tubing cutter wheeled can be replaced with item # 42348.
  • Cuts and deburrs a wide variety of pipe and tubing..
Check Stock

Raindrip 381025B Heavy Duty Support Stakes, 6-Inch, 25 Per Bag, 1

  • Secures supply tubing where you want them.
  • keeps emitters near the root of plant for optimal growth and health.
  • Ideal for use in flower and vegetable gardens.
  • around trees and shrubs, and container plants.
  • Anchors supply tubing in place and helps position emitter near the plant’s root zone.
  • Place 1/8 in. to ¼ in. supply tubing into built-in notches and anchor stake into ground.
  • Use with 1/8 in. to ¼ in. Supply Tubing to transport water to plants.
  • Built-in notches accommodate 1/8 in. to ¼ in. supply tubing, from 0.185 in. to 0.250 in. OD.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • Comes with twenty-five Heavy-Duty Tubing Support Stakes.
Check Stock

Tube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine

  • 【FITS MODEL】- Fits 5/8″ and larger tubing.
  • 【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
  • 【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
  • 【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
  • 【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.
Check Stock

10 PCS Nasal Cannula Tubing for Oxygen, Includes 5PCS 7Ft Nasal Oxygen Cannula for Adult & 5PCS Oxygen Tubing Swivel Connector, Soft-Touch & Kink-Resistant, Standard Connector,7 Feets Tubing Length

  • ➤GREAT-VALUE KIT - Includes 5 packs 7' ultra-soft tubing and 5 packs tubing swivel connectors. Most cost-effective tubing kit in the market!.
  • ➤ULTRA-SOFT & NON-IRRITATING - Made of high-quality silicone, feature super soft tubing around the face and ears to maximize comfort and eliminate the rubbing and red marks on face..
  • ➤KINK RESISTANT - Includes 5 tubing swivel connectors. Tubing is ultra-soft material molded into shape. Designed to be kink resistant so that these tubing wouldn't easily twist and tangle..
  • ➤BETTER AIRFLOW - Nasal prongs naturally stay in place to ensure a comfortable fit for every user and ensure better airflow without constricting oxygen flow..
  • ➤WARMHEARTED SUGGESTION - These tubings are air-tightly sealed in bag. It's suggested to take tubing out of bag A DAY before changing to dissipate the smell of new product..
Check Stock

Oxygen Tubing Swivel Connector, Swivel Connector 1220, 1 pack

  • BOLD GREEN TUBING - This tubing features a bold, green color which is known to lessen the possibility of accidental falls associated with tripping or getting tangled with your oxygen tubing..
  • CRUSH AND KINK RESISTANT - The crush and memory-resistant tubing are great for use while sleeping because you don't have to worry about restricting your oxygen flow when laying on the tubing..
  • THREE CHANNEL TUBE DESIGN - Our Mars Wellness three-channel inner lumen design providing an uninterrupted flow of oxygen that provides maximum safety for the patient.
  • PREMIUM QUALITY MATERIALS - Manufactured from latex-free quality materials which resist cracking and tearing. When uncoiled, tubing lies out straight, minimizing "torque" or pull on the cannula..
  • UNIVERSAL TUBE - These tubes can be used for standard and high-flow oxygen therapy and come with standard connectors which are compatible with all major oxygen therapy brands..
Check Stock

EnduriMed CPAP Hose Cover 6ft - Comfort Sleeve for Heated Tubing - 100% Skin Safe Quality Zippered Tubing Wrap Insulator - Soft Fabric Wrap No Condensation - Insulated CPAP Tube Covers

  • SNUGELL CPAP TUBING COVER 6 FT: Snugell's ultra-soft fleece CPAP Hose Cover is designed to ensure maximum insulation and protection for optimal....
  • UNIVERSAL & COMPATIBLE TUBING WRAP: This hose cover will work with all major sleep apnea tubing and hose CPAP brands such as Resmed, Fisher & Paykel....
  • EASY TO USE: Works with a standard, slimline or heated CPAP tubing. Very easy to put on and off with a seamless zipper design. Great addition for your....
  • IMPROVE LIFE CYCLE OF TUBING: Minimizes water and dust accumulation on your tubing walls, reduces condensation, and provides maximum insulation and....
  • PROTECTIVE CPAP HOSE COVER WRAP FABRIC: Snugell’s CPAP Hose Cover cooling layers improve comfort and safeguard your tubing every night. Snugell is....
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock