Best Eight Cylinder Can Cooler

Topteng Gasoline Chainsaw 20 Inch, 52cc Gas Chainsaw 20' Bar Powered Engine 2 Cycle Gasoline Chain Saw, Orange

  • Engine: single cylinder, air cooler, 2-stroke. Bar Length: 20". Model: 52cc..
  • It adopts the automatic brake system with wide designed front hand guard, which is able to reduce injury during operating..
  • The anti-kickback chain decreases the probability of kickback, which increases safety. In addition, it also can be used under extreme environment with long life due to aluminum solid protection..
  • It is also able to efficiently prevent the dust enter the engine by engine clean air-intake system. It also features with anti-vibration design, which allows you to use it easily..
  • The aluminum solid crankcase enables to withstand the high rotate speed. The electronic ignition with auto choke is easy for you to start it..
Check Stock

Kegco K199SS-1 Kegerator, Stainless Steel

  • ...quipment you'll need to pour fresh draft beer straight from a keg, including a lightweight 5 lb. aluminum CO2 tank, a double gauge CO2 regulator, a sankey keg coupler that is designed to fit most of your favorite domestic beer kegs, and a single faucet draft beer tower that will impress any beer aficionado. The CO2 cylinder ships empty and will need to be filled locally..
  • LARGE INTERIOR: This keg cooler will hold one full size, straight pony, or quarter slim keg and up to two sixth slim, strap handle, or rubber home brew kegs (it will not fit Bevel or Rubber kegs that are wider in the middle than at the top or bottom). It comes complete with two removable wire shelves that allow you to easily convert it into an all-refrigerator or beverage center whenever you need extra refrigerated storage for food and beverages..
  • SLEEK AND STYLISH DESIGN: This beer cooler houses your kegs in an all black cabinet with an elegant stainless steel door. 2-1/2" casters allow you to move it to any room in your home from the kitchen to the home bar to the patio, so you can serve your favorite draft beer with style and ease from any place in your home. Additional features include a removable drip tray to collect spills, a textured serving countertop, and an attractive metal ....
Check Stock

Ice Genie New & Improved- The Original Ice Cube Maker, Holds up to 72 Cubes, Now Larger Cubes, Silicone Bucket With Lid, Use Indoors/Outdoors, Bottled Beverage Cooler, Dishwasher Safe & BPA-FREE

  • NEW & IMPROVED Ice Genie Ice Cube Maker now makes 24 cubes at a time and holds up to 72 traditional ice cubes. The cubes are now 1” compared to the original unit creating ¾” ice chips..
  • FILL THEN CHILL Simply fill the translucent outer chamber with water, squeeze outer chamber to release the inner cylinder after water freezes, and easily squeeze outer chamber to release the cubes. The new softer outer material makes ice removal easier & closed inner chamber makes sure there are no leaks & serves as an ice cube tray! The lid also provides aid in removing the inner chamber if placed under unit and pushed down..
  • SAVE SPACE IN YOUR FREEZER The revolutionary design can replace up to 4 traditional ice cube trays in your freezer! Can also fit perfectly inside mini fridges!.
  • USE AS A DRINK HOLDER Whether you’re throwing a party, wine night, or relaxing by the pool, Ice Genie doubles as a portable cooler to keep your beverages cooler for longer or quickly chill bottled beverages!.
  • DISHWASHER SAFE, BPA-FREE & ODOR-FREE Ice Genie is made of high quality, flexible food-grade silicone that is made with safe BPA-Free materials. Our ice cube maker is easy to clean being that it is top rack dishwasher safe. The form-fitting lid keeps your cubes fresh!.
Check Stock

Ice Genie DELUXE The Original Ice Cube Maker | Holds up to 180 Ice Cubes | Silicon Bucket | Perfect for Indoor/Outdoor Use | Bottled Beverage Cooler | Dishwasher Safe & BPA-FREE | Ice Tongs Included

  • ???? EASY RELEASE & NO SPILL WITH OUR DOUBLE CHAMBER DESIGN: Our unique double chamber design holds up to 160 ice cubes! Simply fill the outer chamber with water, then lift up the inner cylinder after the water freezes, and easily squeeze the bucket to release the cubes! The flexible silicone material makes it easy to release ice cubes straight into the bucket! There will be no awkward twisting and turning or spilling cubes on your floors with our revolutionary design!.
  • ???? SAVE SPACE IN YOUR FREEZER: Hold 40% MORE ice cubes with The Ice Genie Original DELUXE Ice Cube Maker. Our revolutionary design can replace up to 15 traditional ice cube trays in your freezer, saving even MORE space in your freezer! Can also fit perfectly inside mini-fridges!.
  • ???? USE AS A DRINK HOLDER: Whether if you’re throwing a party, wine night, or relaxing by the pool, The Ice Genie Original DELUXE Ice Cuber Maker doubles as a portable cooler to keep your beverages last cooler for longer! Use them for your wine and bottled beverages, cocktails, iced coffee, juices, canned drinks, and more!.
  • ???? DISHWASHER SAFE, BPA FREE, & ODOR FREE: The Ice Genie Original DELUXE Ice Cube Maker is made of high quality, flexible food-grade silicone, BPA FREE. Our ice cube maker....
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

New Gas Chainsaw,20 Bar 52cc Gas Powered Chainsaw 2 Stroke Handed Petrol Gasoline Chain Saw for Cutting Wood

  • AUTOJARE Gas Chainsaw YJ5202----Engine displacement: 52cc.
  • Engine tpye: single cylinder, air cooler, 2-stroke.
  • Maximum cutting length guide bar size: 20".
  • Fuel mixture ratio: 25:1(90#gasoline:2-cycle oil).
  • The gas chainsaw chain saw will make tasks like tree pruning, clearing land, preparing firewood or cleaning up after a storm easier ..
  • This chainsaw is great for homeowners who want a chainsaw for light wood-cutting chores. starts easily..
Check Stock

1- Black Cigar Ashtray Ash2Cigar-1

  • What you will get: you will receive 2 black car cylinder with lid, sufficient quantity to meet your daily needs.
  • Good quality: auto cylinder for car is constructed out of quality material to provide you with a sturdy and durable tray, fits most car cup holder.
  • Cool blue light design: cool blue light will be lighten when open, when you lift the lid, the car cylinder cool blue LED light up.
  • Convenient to install: you only need to fix the car cylinder with 2 fixing clips, it can remain stable when driving, car cylinder help remove odors....
  • Versatile application: the portable cylinder is ideal for office, home and car use.
  • It is also can be a mini trash can and easy to carry with compact....
Check Stock

EdgeStar Full Size Dual Tap Built-In Outdoor Kegerator - Stainless Steel

  • ...quipment you'll need to pour fresh draft beer straight from a keg, including a lightweight 5 lb. aluminum CO2 tank, a double gauge CO2 regulator, a sankey keg coupler that is designed to fit most of your favorite domestic beer kegs, and a single faucet draft beer tower that will impress any beer aficionado. The CO2 cylinder ships empty and will need to be filled locally..
  • LARGE INTERIOR: This keg cooler will hold one full size, straight pony, or quarter slim keg and up to two sixth slim, strap handle, or rubber home brew kegs (it will not fit Bevel or Rubber kegs that are wider in the middle than at the top or bottom). It comes complete with two removable wire shelves that allow you to easily convert it into an all-refrigerator or beverage center whenever you need extra refrigerated storage for food and beverages..
  • SLEEK AND STYLISH DESIGN: This beer cooler houses your kegs in an all black cabinet with an elegant stainless steel door. 2-1/2" casters allow you to move it to any room in your home from the kitchen to the home bar to the patio, so you can serve your favorite draft beer with style and ease from any place in your home. Additional features include a removable drip tray to collect spills, a textured serving countertop, and an attractive metal ....
Check Stock

Hoshizaki F-330BAJ 24-Inch Air-Cooled Undercounter Flake Ice Machine Maker with 80 lb. Storage Capacity, 332 lbs/Day, 115v, NSF

  • Low-density polyethylene ice chamber for strength and chemical resistance.
  • U.S. model for direct connection to matching threads on liquid carbon dioxide (LCO2) tank.
  • A 50-lb. cylinder of liquid carbon dioxide (purchased separately) makes eight blocks of dry ice, with a production cycle producing one 454-gram ice block measuring 10.4 (l) x 9.2 (w) cm in approximately one to two minutes.
  • Chamber held in place by a metal clamping mechanism for reliability.
  • Has a porous polyethylene diffusion plate to vent excess gas, and a built-in gas pressure gauge with relief valve to monitor and prevent pressure build-up for safe operation.
Check Stock

TOPSKY All Molded Foam Video Gaming Chair for Home and Office (Black and Red)

  • ... most comfortable position for gaming or relax with 【Recline Function】..
  • Don’t want to experience the swaying handrail again? last chair armrest lost elbow support in less than a month? TOPSKY wavy shaped 2D Armrest with soft PU pad will improve your elbow support issues and relieve your fatigue..
  • Class 4 gas cylinder+ the steel tube frame + all Molded Foam construction can easily support 300lb weight capacity. But our recommend size 003c 6 feet and 250lb.*Recommended size means you can use our products more comfortably. And 300lb is the theoretical maximum. ★★★YOU CAN CHECK IMAGE EIGHT WHICH WITH MODEL TO CONFIRM IF YOUR CHAIR FIT YOUR HEIGHT AND SIZE. ★★★.
Check Stock