Best Electrical Junction Box Cover

ECUDIS 4 Cross-Shaped Universal Light Fixture Crossbar Lighting Crossbar with Screws and Nuts

  • 4" Off Swiv Offset light crossbar, 3 13/16" in length with screws and nuts..
  • Use to mount lighting fixtures to wall or ceiling, match black and silver lamp..
  • Easy to install the crossbar on the electric box, please follow your local electrical codes and regulations..
  • Adjustable hardware iron light hardware tools for lighting fixture installation, you can use it for fixtures or canopies to electrical junction boxes.
  • Package includes: 1 x crossbar, 2 x 1.5" screws, 2 x 1" long screws, and 2 x black acorn cap nuts, 2 x silver acorn cap nuts..
Check Stock

Franklin, 2801054915, Control Box, 1/2HP, 230V, 1Phase

  • 24 volt Fan Center for Tjernlund AireShare Transfer Fans.
  • Use with any 24 volt thermostat to control models AS1 & AS2 Transfer Fans.
  • Installs within AS1 or AS2 electrical junction box.
Check Stock

Panasonic KX-T30865-W Door Intercom

  • Designed for two way conversation with front gate or door.
  • Can be mounted on any flat surface, or over an electrical junction box.
  • Requires one pair of wires connected to the control unit, and has internal wire-clamp terminals for two stripped wires.
Check Stock

Panasonic KX-T30865-B Door Intercom

  • Designed for two way conversation with front gate or door.
  • Can be mounted on any flat surface, or over an electrical junction box.
  • Requires one pair of wires connected to the control unit, and has internal wire-clamp terminals for two stripped wires.
  • Requires KX-TA62460 Door/Opener Card for the KX-TA624-5 phone system.
Check Stock

Pyle in Wall Speaker Volume Control – Home Audio Smart 2-Channel A/B Dual Channel Speakers Controller Selector Pod Box – Rotary Knob Fader Control Up to (2) Pair of Indoor or Outdoor Speakers PVCD15

  • EASY TO INSTALL: The Pyle in-wall stereo volume control installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers.
  • ROTARY KNOB OPERATION: The indoor outdoor speaker controller features a convenient and simple rotary knob controls which makes volume adjustments a breeze! Control up to 2 speakers with the two independent rotary faders.
  • OPERATION: Set the amplifier’s volume control to minimum. Turn on the amp and set its volume control slightly above the normal listening level. To increase/decrease the remote speaker’s volume turn the inwall volume control clockwise/counterclockwise.
  • UNIVERSAL COMPATIBILITY: The 2 channel speaker volume fader is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. It also features up to 120 watts load handling power.
  • STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls.
Check Stock

Set of 4 4" Ceiling Box Carlon, New Work, With Nails, Color Blue -No. B520AR-UPC, 4", PVC, Round

  • OUTDOOR ELEGANCE: Make your outdoor living spaces as comfy and classy as indoors. Our Hubbell TayMac Outdoor Ceiling Fan and Luminaire Box gives you safe and secure mounting for outdoor fans and chandeliers..
  • UPGRADE HOME EXTERIORS: Our round outdoor electrical box for ceiling fans with lights can be mounted parallel, perpendicular, or 45 degrees from a joist. It's ideal for covered patios, porches, and pergolas..
  • CONVENIENT SETUP: Our exterior weatherproof electrical box comes with closure plugs and reducer bushings for your convenience. It also includes an optional rain collar for weatherproof fans..
  • STURDY SUPPORT: You get a solid mount for fans up to 70 lbs or heavy luminaires up to 150 lbs. Our outdoor junction box is made of heavy-duty PVC and an integrated galvanized steel support bracket..
  • SAFETY AND QUALITY: Find relaxation and peace of mind with a high-quality ceiling fan light kit built to industry safety standards. It's cULus listed, NEMA 3R rated, and NEC compliant..
Check Stock

Nilight - 50048R 7 Way Electrical Trailer Junction Box 7 Gang Trailer Wire Connector Junction Box Weatherproof for Rewiring Camper RV Caravans Boat 7 Pole Cable Connection Box,2 Years Warranty

  • TIDY YOUR TRAILER WIRING: A sturdy 7-Pore Trailer Junction Box with 7 terminal studs provides safe and secure trailer wiring install with markings to easily identify the correct connections.Fit Type: Universal.
  • EFFICIENT DESIGN: Quickly adds additional equipment and lights, change the power connector, or redo your trailer cable without leaving any wire splices exposed to the elements.
  • TIGHTLY SEALED PROTECTION: Durable plastic housing coupled with rubber grommets provides superb protection against nature's bad days.
  • UPGRADE TRAILER CONNECTION: Quickly adds extra lights and accessories. Upgrade your old trailer wiring, makes re-wiring, troubleshooting and fixing electrical problems much simpler. Perfect for wiring up your trailer, camper, caravans, boats and other towed vehicles.
  • PACKAGE INCLUDES: 1 junction box with a set of Fasteners + color card + pack of rubber boot grommets.
Check Stock

Nineleaf ABS Plastic Dustproof IP66 Waterproof Junction Box Universal Electrical Project Enclosure Grey 3 1/4 inch x 2 3/4 inch x 2 1/4 inch (86x74x62mm)

  • The waterproof Junction box is made of ABS plastic, IP66 waterproof rated. Solid construction and a good seal to protect against sun exposure, dust, corrosion and splashing water. Very suitable for outdoor use..
  • Outer Box Size:3 1/4" x 2 3/4" x 2 1/4" (86x74x62mm). Color: Grey. Mounted Type : Surface Mounted..
  • The DIY opening hole design greatly ensures the sealing of the waterproof project box. Up to 5 holes can be distributed on the 4 sides and bottom of the waterproof box. You can make holes according to your needs..
  • The waterproof electronic box has cover with 4 screws to fix it. There is a Rubber sealing stripe at the interface between the cover and the waterproof box, which can make the waterproof box more sealed to ensure safe use in bad weather..
  • The waterproof project box can be configured with 20 mm Cable Glands Joints, you can purchase it additionally according to your needs(ASIN: B077QMB3MG).The waterproof junction box suitable for aboard, garage, house, garden, farm, pond, underground, terrace, workshop, construction site, external wiring or external lighting etc..
Check Stock

ARLINGTON INDUSTRIES GIDDS-628006 628006 19-12/ Black Outdoor Support Post for Light Fixture and Gfci

  • ONE-PIECE ASSEMBLY - IN BOX’s one-piece assembly replaces the installation of an electrical box, siding block, and bubble cover assembly. Cover is....
  • WEATHERPROOF - 22.0 cu. inch recessed electrical box with weatherproof-in-use extra-duty cover for existing siding construction..
  • NO GASKETS REQUIRED - Accepts most single gang wiring devices and uses standard indoor wall plates or a GFCI cover plate..
  • DURABLE - For New Stucco, Textured Surfaces, and Rigid Siding. UV rated plastic for long outdoor life. Non-metallic cover and base. Box and white....
  • SPECIFICATIONS – Trade Size: 1-Gang - Style: Vertical - Height: 9.058" - Width 7.012" - Weight 1.06 lbs/each..
Check Stock

N'ice Packaging 2-Pack White Leatherette, Triple Finger (5'x2'x2.25'H) Showcase Finger Ring Display Finger Multi-Ring Jewelry Stand

  • The project box is easy to operate and repair, no cable cutting, more convenient.
  • Net Weight: 237g, Main Color: Light Gray (For Box Body), Transparent£¨For box cover£.
  • Outside Size (approx.): 6.2"x3.5"x2.5"(158mmx90mmx64m).
  • Inner size (approx.): 6.05"x3.14"x1.94"(154mmx84mmx52mm)(L*W*H)- - (Allowable Error: 2mm).
  • Package Content: 1 x Junction Box, 4 x Screws, 1 x Rubber Grommet.
Check Stock