8 Pieces Clear Acrylic Sheet Cast Round Square Plastic Glass Board with Double-Sided Protective Paper for Crafts, Windows, Frames, LED Light Base, Signs and DIY Display Projects
What you get: you will get 8 clear acrylic sheets, 4 pieces respectively for square and round ones.
The clear acrylic sheets have enough quantity and different shape, which can meet your different needs.
Protective design: the transparent acrylic sheets are covered with protective paper on both sides to avoid scratching and getting dirty.
The protective film is easy to be torn off and will not leave sturdy residue.
Reliable material: the plastic glass board is clear enough, so that you can see through it.
The plastic glass board is stronger than glass panel, which is unbreakable, durable and capable of withstanding severe weather.
Easy to cut: you can use circular saw, jig saw, table saw, band saw and hole saw to make the cuts you needed without cracking and scratches, and to provide clean cut edges without burrs.
Applicable occasions: the transparent acrylic board can fit well with the slot with the dimensions of 2.76 x 0.08 x 0.79 inches (L x W x H), which is suitable for LED light base, photo frames, bird feeders, fish tank lids, crafts, signs and DIY display projects.
IZTOSS 6 Gang Waterproof Rocker Boat Switch Panel with pattern of American Flag, 5 Pin ON/Off Toggle Switch with 5V/4.8A Dual USB +Digital Voltmeter+Power Socket,for Marine Boat Car RV Vehicles (Blue)
... flag, striking and beautiful, perfect for your machine..
☆【All-in-one design】Every part in boat rocker switch panel is detachable,you can change the position of any parts according to your needs. What’s more, the switch panel can be DIY-used to control any vehicle electrical appliance, fits for all 12/24V Vehicles Boats Yacht Cruises Speedboat Cockpit Bus RVs Jeep SUV Lorry Truck..
☆【Easy to install】With wiring harness for controlling lighting, only to put the boat panel switch into the hole, fix it with screws, then you can easily install it in both 12V and 24V vehicle yacht ship caravan truck etc..
☆【IP67 Waterproof & Multiple protection】The boat switch panel adopts a heavy duty Aluminum face panel,which is splash-proof. Don’t worry about water when using them in boat or ship. With output short circuit protection, overload protection,temperature range can reach -25 degrees to 80 degrees. electrical life reach 50,000 times on and off at full load..
☆ IZTOSS is a professional manufacturer and seller of high-quality switch panels. Each part on the switch....
MKC Thin-Wall HSS Bi Metal Hole Saw Cutter 3-1/8 inch for Thin Metal, Stainless Steel, Drywall
1，The top shoulder design prevents over drilling into material and potentially damaging inner components of the electrical and junction boxes when hole is completed. It’s safe cutting..
2，Ideal for electrical and plumbing tradesman，construction, aircraft, maintenance. Use in plastics, sheet stainless steel and metal, wood, drywall, MDF..
4, The teeth are M42 Co 8%, Durable design for smooth cuts in sheet metal，Clean, fast cutting stainless steel long-lasting use. The special design teeth Cuts much faster than standard bi-metal hole saws up to 50%..
Cam accessories GIDREN 6 Gang 5 Pin ON Off Toggle Rocker Switch Panel with Circuit Breaker and 2 LED for car Marine Boat RV Trailer Truck (Blue)
［6 Gang rocker switch panel］: This model combines with 6 pcs ON-OFF 5 Pin rocker switch , double LED lights.Doing well for circuit control , electrical devices are controlled easily..
［Simple wiring］: The red wire is connected with possitive pole of the battery and the black wire is connected with neggative pole..
［Multi protection］: Short circuit ,reverse polarity,over charge,over voltage and over load are prevent from happening. High quality Aluminium alloy face panel , protecting the whole electrical system in safety..
［Wide application］: Suit well for controlling electrical equipments in the car ,boat , truck , yacht ,caravan,ATV and so on.IP65 waterproof and environment friendly..
［Easy installation］: Pre-wired , wire instruction and screw make the installation easy.It is mounted vertically and horizontally , with multi functional stickers controlling the devices easily..
-Pair of 5 1/4" speaker kick panels with option for up to 2" tweeter (this hole is not cut) for 1973-1980 Chevrolet and GMC pickup trucks, Jimmy, Blazer, Suburban, and Crew Cabs..
-The drivers side panel replaces the existing kick panel and will clear the emergency brake pedal with no modifications..
-The passenger side is made to fit over the original full or half panel..
-The passenger side will install with no modifications. The drivers side will require the use of an original half panel to hold the vent. The new kick panel will need to be cut out with tin snips or a jig saw so it does not block the vent..
Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester ET310 & Tools 69401 Multimeter Carrying Case
Product 1: This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Product 1: Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker.
Product 1: Receiver delivers clear visual and audible indications when the correct breaker has been located.
FORTE Cordless Circular Saw 20V MAX 6-1/2 IN. Power Circular Saw with Battery, Adjustable Cut Depth & Cut Bevel for Wood Worker Household DIY Project
【High Performance】 20V motor runs at 3300 RPM No Load Speed for faster cuts of wood, bamboo plywood, solid wood panel, PVC tube with ease. The depth adjustment knob could adjust the depth of cut from 0 in. to 2 in. The bevel adjustment allows you to set the circular saw for bevel cuts from 0°(2 in) to 45°(1-1/3 in)..
【Safety Switch】 Reduce the possibility of accidental starting. Depress the safety switch, and then squeeze the trigger switch to start the saw. To stop it, release the trigger switch. The lower blade guard attached to the circular saw is covering the blade for your protection and safety..
【Ergonomic Design】 Comfortable micro-texture grip handle for less fatigue, provide stronger clamping force for more stable cutting.
Compact body and only weighs 6.8lbs(with included battery) for less fatigue during operation..
【Powerful Battery】 Feature a 20V 1.5Ah Li-ion battery to offer great power for fast cutting, 2.5A fast charger completes a full charge in 60mins. Blade diameter 6-1/2 in, powerful speed for faster multi-purpose cuts of soft metal, tile, drywall, plastic, and more with ease..
BRIGHT ILLUMINATION – This Gama Sonic Light My Shed IV illuminates a bright 500 lumens (250 lumens per lamp head) when activated by the pull-string in a bright-white color temperature..
NO ELECTRICAL WIRING – This solar shed light is perfect for DIY enthusiasts looking to illuminate their garden sheds, utility closets and outdoor work spaces. Installation is simple and does not require electrical wiring, just place in a spot with direct sunshine..
LOW MAINTENANCE – This solar utility light requires little to no maintenance. Once the detachable solar panel has been installed in a spot with direct sunshine, leave the rest up to the sun. The only maintenance required is an occasional wipe of the solar panel with a damp cloth..
DURABLE AND WEATHER RESISTANT - This Gama Sonic solar powered shed light is constructed with a rustproof, robust resin frame, making it a durable and reliable asset to your home.
the integrated battery pack is also crafted to last for about 3 years or roughly 1,000 charges, 7" x 6.5".
