Best Electronic Angle Measuring Tool

Huepar Digital Level Angle Gauge Mini Angle Finder Level Box with V-Groove Magnetic Base&Backlight LCD Bevel Gauge Inclinometer for Carpentry,Building, Automobile, Masonry -0-360°Fast Measurement AG01

  • ✔️HIGH ACCURACY&FOUR UNITS: 0.1°at 0° ~90° , ±0.2° at other angles with the resolution 0.05°. It is designed with a wide measuring range of 4*90°(0~360°). There are four selections of measuring units, degree(°),percentage(%), mm/m, in/ft, which can meet various working demands. This digital angle inclinometer provides convenience in woodworking, construction, machinery, telecommunications, automobile etc..
  • ✔️BACKLIGHT LCD DISPLAY & EASY-TO-READ: The Digital Angle Gauge has a large LCD display with backlight, which provides accurate, quick and clear measurements. Users can easily read the measurements even in dark environment. The backlight can be switched on and off freely. Also the Display will be inverted Automatically when the tool is upside down. In addition, this digital level tool will automatically turn off after 5 minutes of no operation to save battery..
  • ✔️MAGNETIC V-GROOVE BASE&EASY MARKING: With its powerful magnetic V-groove base at the bottom, this digital bevel gauge can easily and firmly attach to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Thanks to its strong magnet, there’s no need to worry about holding the tool in p....
Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

  • 【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
  • 【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
  • 【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
  • 【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
Check Stock

TOOLIOM Digital Angle Finder with Dual Electronic Laser 4-side Strong Magnetic Angle Gauge Rechargeable Digital Level Tool with Type-C Charging Port for Woodworking and Building

  • 3 Functions in 1 Unit : Digital electronic level with dual laser can be used as measure angle, check relative angles, and laser level..
  • 360°Measuring Range : Can be measured on all four sides, provide easy use at woodworking, bending conduit, etc. Auto-rotates when upside-down for easy read.
  • Dual Lasers : It is great helper for horizontal and symmetrical installation. Widely used in measuring, leveling in woodworking renovations and building furniture..
  • Zero Calibration : Feature No need to add and subtract again on the tilt angle, more convenient for relative angle measurement..
  • Magnet on 4 Sides : Can attach to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces..
Check Stock

Oak Valley Designs™ Flat Carpet Stair Treads - Anti Slip Indoor Stair Mats for Wooden Stairs, Style: Bayside Charm, Crystal Canyon 27\ W X 10\ D (Set of 14)

  • ...ale and female fit slot, making the measurement more accurate, stable and easier to use. Accurate and clear ruler markings allow the stair tread installer to accurately measure the length and angle of treads and risers. Dual-use design of the sliding rod and wooden bar..
  • COMPLETE ACCESSORIES: Each set of stair tread measuring tools consists of (2 × tread templates, 2 × 16-inch sliders, 2 × 12-inch sliders, 2 × 8-inch sliders, 2 × wooden strip fixing blocks, 9 × knobs, 5 × long screws, 9 × short screws, 1 × washer, 1 × 6-angle screw wrench, 1 × toolbox.) which can be used in combination to form one piece of tread template according to the actual stair length and at any angle. This is an essential tool for precision cutting and professional measurements..
  • RELIABLE AND DURABLE: The stair gauge is made of an impact and chemical resistant aluminum-alloy material with thickness up to 5 mm, making it resistant to damage and bends. The CNC anodized surface is wear-resistant and rust-proof, and the electroplating markings are more precise and clearer. With superior quality, reliability and durability, this stair measuring tool will help you lay out stair treads, risers and shelves. Easily adjust the angle and length to meet any work requirements..
Check Stock

Mecurate Miter Saw Protractor, Inch/Metric Miter Protractor with Bobble Level, Miter Cut and Single Cut for Crown Molding

  • 【Accurate & Durable 6" Angle Finder】Made by durable ABS plastic, the protractor with accurate laser engraved scales and level bubble. Reliable to measure accurate angles for crown molding and a variety of other carpentry applications..
  • 【Two Measures, One-glance Conversion】The angle finder is featured with inside & outside scales to measure angle for single cut and miter cut. The angle conversion table on instruction converts right angle to your miter saw..
  • 【O-ring Design, Make Right Angle】The O-ring mechanism is full 360 degrees rotation, easliy to adjust and capture angle measuring. 6" angle measuring tool, Easy to carry and store..
  • 【Combination for Functions】Integrated with spirit level, ensure to hold the protractor on same plane to get accurate angle. Inch / CM combination enables quick measurement.
  • 【Versitility, Won't Miss Out】No matter trim widow & door, or cut tight-fitting joints, this carpenter tools measure angles to get right joint surface. It's essential for carpentry, molding, plumbing and metalworking..
Check Stock

Digital Angle Finder Protractor Angle Measurement Tool, 2-in-1 Digital Protractor for Woodworking/Construction/DIY, Stainless Steel 360 Degree with Large LCD Display 7inch

  • ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
  • SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
  • DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
  • WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Neitra Stair Tread Template Tool – Solid Metal Stairs Jig for Accurately Measuring Angle and Length Dual-Use Sliding Rod and Wooden Strip Suitable for Stairs Risers and Partition

  • ...ale and female fit slot, making the measurement more accurate, stable and easier to use. Accurate and clear ruler markings allow the stair tread installer to accurately measure the length and angle of treads and risers. Dual-use design of the sliding rod and wooden bar..
  • COMPLETE ACCESSORIES: Each set of stair tread measuring tools consists of (2 × tread templates, 2 × 16-inch sliders, 2 × 12-inch sliders, 2 × 8-inch sliders, 2 × wooden strip fixing blocks, 9 × knobs, 5 × long screws, 9 × short screws, 1 × washer, 1 × 6-angle screw wrench, 1 × toolbox.) which can be used in combination to form one piece of tread template according to the actual stair length and at any angle. This is an essential tool for precision cutting and professional measurements..
  • RELIABLE AND DURABLE: The stair gauge is made of an impact and chemical resistant aluminum-alloy material with thickness up to 5 mm, making it resistant to damage and bends. The CNC anodized surface is wear-resistant and rust-proof, and the electroplating markings are more precise and clearer. With superior quality, reliability and durability, this stair measuring tool will help you lay out stair treads, risers and shelves. Easily adjust the angle and length to meet any work requirements..
Check Stock

Gain Express Digital Protractor Angle Finder Level Inclinometer Magnetic V-Groove 0~360 Degree with Backlight

  • USEFUL 3-IN-1 DEVICE – This newest digital gadget features with protractor, angle finder and level in one measuring tool. Large and ultra clear....
  • WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields and etc.
  • V GROOVE BASE – The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline....
  • CONVERTS ANGLE TO OTHER UNITS : Conversions between : 4 x 90˚ m/m : 1000mm/m, % : 100%, in/ft : 12in/ft. No more guessing or fuzzy conversion!.
  • ABSOLUTE & RELATIVE MEASUREMENT – The regular absolute measurement mode can only measure the angle against horizontal plane. This tool also features....
Check Stock

Amazon Gold Plus 6'/150mm Electronic Caliper

  • Absolute and Incremental readings: Floating zero for setting zero anywhere within the range of the tool.
  • Stainless steel construction: Four-way measuring for external, internal, depth and step measurements.
  • Electronic caliper, 2 batteries, extra battery cover, 1" standard for checking accuracy, instructions and a fitted case.
Check Stock

ZQYA Multifunction Woodworking Marking Gauge Mounting Hinge Jig Angle Ruler 45/90 Degree Protractor Drill Guide Measuring Tools Chamfer Gauges

  • 45° and 90° Measuring angle,the woodworking tool combines dowel jig and angle marking gauge into one.
  • With laser engraving metric scale, perfect for measuring or marking short items and their angles.
Check Stock