Universal 9' Rear-End Disc Brake Conversion Kit, Red, for Ford
Easy to install, bolt on rear disc brake kit for your pre-1980 Ford passenger car 9 Inch rear-end.
Features drilled/slotted rotors, red single piston calipers w/ pads, braided stainless hoses, E-brake loaded calipers, as well as all brackets & hardware.
The rotors have a dual drilled bolt pattern for use with 5 on 4.5" or 5 on 4.75".
This kit also includes detailed instructions for a quick and painless installation.
Requires use of 15" or larger wheels due to clearance.
JOJOY LUX Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper
【Application】This brake caliper press tool suits for disc brake, NOT for drum brake. The tool is equipped with 2 groups of push boards: 7.01x2.36"and 4.53x2.17".Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need..
【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the....
4 Sizes: 4”, 8”, 10”, 12”，more sizes to meet your needs.
Great for shapping, carving, sculpting, and smoothing clay, wax, and soft mediums..
Clay Caliper Tool: The Clay sculpture tool is light weight and easy to handle.
Ideal for pottery clay sculpture measuring.It is a practical tool no matter for professional clay sculpture worker or a craft amateur..
High Quality: Made of stainless steel and assembled with polished and rust-free hardware, sturdy, high hardness, strong, durable and long service time, smooth surface and edge without any burr..
Easy to Use: Lightweight and anti-slip design allow you to handle them with ease. inside caliper is available in the same size range as outside caliper. Firm joint calipers use friction at the joint to hold the legs not move..
Application: Outside calipers measure thicknesses and outside diameters of objects, inside calipers measure hole diameters and distances between surfaces. Great for you to measure the external and internal dimension of an object, such as sculpture, potter, clay, tube, hole and so on..
G2 Brake Caliper Paint Set High Temperature High Gloss Self Leveling Brush On Brake Calliper Paint System Kit (Red Fire)
This top-of-the-line BRAKE Caliper Paint System Set from G2, is the most complete and easy-to-use kit available and includes everything necessary to paint four (4) standard sized brake calipers or two (2) drums in your driveway or professional performance shop..
G2 has specially contracted chemical engineers to research and develop our two-part paint which now offers the highest heat resistance on the DIY aftermarket (up to 980 degrees). Easily applied as a brush-on, the paint adds a great styling touch to any brake caliper ultimately highlighting already stylish show-through rims..
Each kit is hand-assembled and all of our materials are 100% made in the USA! Included is a high-performance aerosol caliper cleaner, mixing can, stirrer, application brush, installation instructions and a color decal..
The G2 High Temperature Brake Caliper Paint System Set contains approximately 3 1/2 liquid oz. of paint and approximately 1/2 liquid oz. of reactor, yielding 4 liquid oz. total when mixed, which will cover four (4) standard brake calipers or two (2) brake drums. However if you have over-sized calipers on the front of your vehicle and/or if you are planning on painting your brackets, rotor caps etc. you'll probably need two kits..
NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986
New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
AutoShack BC2994PR Brake Calipers Assembly Pair Set of 2 Front Driver and Passenger Side Replacement for 2006-2011 Milan 2006-2012 Ford Fusion 2006 Lincoln Zephyr 2007-2012 MKZ 2006-2007 Mazda 6
This package contains 2 front driver and passenger side disc brake calipers. These calipers have a silver zinc plating that prevents rust from forming. Includes banjo bolts, copper washers, pad clips, guide pins and bleeder screws.
OE / Interchange: 18-B5000, 18-B5001, 18-P5000, 18-P5001, 18-5000, 18-5001, SLB1992, SLB1993. Bleeder port size: 5/16-24_UNF, Inlet port size: M10x1-6H, Piston count: 1, Piston size: 2.25 in. / 57.1 mm.
ISO / IATF 16949 Certified, made from premium quality materials to meet OEM specifications. All calipers are 100% brand new, pressure tested and backed by a 6-month warranty.
Replacement for 2006-2012 Ford Fusion 2006 Lincoln Zephyr 2007-2012 MKZ 2006-2008 2009 2010 2011 2012 Mercury Milan 2006-2007 Mazda 6 2.3L 2.5L 3.0L 3.5L AWD FWD.
Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Raybestos FRC11896N Opti-Cal New Brake Caliper, 1 Pack
SUPER PREMIUM GRADE: Raybestos Element3 Brake Calipers offer super premium replacement brake calipers made with newly manufactured materials, offering unparalleled style and performance.
OE SPECIFICATIONS: Precision engineered to meet or exceed OE performance and durability, providing time-saving, trouble-free installation.
ALL NEW COMPONENTS: Made with 100 percent newly manufactured materials (not rebuilt or remanufactured) for superior quality and performance.
RIGOROUSLY TESTED: Tested for extreme pressure, temperature, torque and degradation resistance to ensure safe, reliable performance after thousands of miles.
JIFETOR Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper
...f the spreader, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
WIDE FITMENT: This brake piston expander has 2 sets spreading plates. Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress at the same time, which some brakes need..
EASY TO OPERATE: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing..
PREMIUM AUTOMOTIVE DISK BRAKE CALIPER PISTON RETRACTOR: Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while usi....
