Best Elm323 Rs232

Sena SD1000 Long Range Bluetooth Serial Adapter

  • Wireless Bluetooth replacement of RS-232 communication, works with any standard RS-232 port.
  • Meets Bluetooth specification v2.0 + EDR Class 1.
  • 100 meters nominal transmit distance or up to 1 kilometer with patch antenna.
  • +18 dBm maximum transmit power, -88 dBm (0.1% BER) receive sensitivity.
  • Supports Bluetooth profiles SPP (Serial Port Profile), easy to use Windows configuration tools.
Check Stock

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

  • BN-880 is suitable for Open source flight controller, not for flight control with SCM.
  • Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
  • Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
Check Stock

StarTech.com 4 Port Native PCI Express RS232 Serial Adapter Card with 16550 UART - Low Profile Serial Card (PEX4S553), Green

  • Add 4 RS-232 serial ports to your standard or small form factor computer through a PCI Express Expansion Slot.
  • Native single-chip, single lane PCI Express chipset delivers true PCIe performance, up to 48% more efficient than bridge chip designs.
  • Standard and low profile/half-height brackets included to ensure fitment in any system.
  • Four high speed RS232 serial ports, with support for data transfer rates up to 128000bps.
  • 256-byte deep FIFO per transmitter and receiver.
  • Native single-Chip, single lane PCI Express.
  • Includes half-height/low profile mounting brackets.
  • Compliant with PCI Express Base Specification 1.1.
Check Stock

DTECH 10 Feet USB 2.0 to RS232 DB9 Serial Port Adapter Cable with FTDI Chipset Supports Windows 11 10 8 7 and Mac Linux

  • (NOT USB to VGA adapter) USB to serial adapter FT232 cable allows your computer to make communication with serial devices equipped with 9 pin female....
  • USB to male serial port adapter cord is designed for connecting Serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode....
  • (FT232 chip) Long FTDI serial cable to USB adapter for Windows 11,10, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later (9 wire pinout 1-9: DCD, RXD,....
  • COM port serial to usb converter is designed with a high performance quality processor chip (FT232RL), which makes this USB RS232 adapter one of the....
  • 10ft DB9 RS232 to USB adapter with 9 pin male to USB-A male gold plated connector uses crystal clear blue enrich injection, strong and beautiful.
Check Stock

General Tools DM8215 Deluxe Digital Manometer, 0-15 psi

  • Digital display of gauge or differential pressure.
  • Display unit options are psi, inH₂O, bar, mmHg, ozin, kgcm, kPa, ftH₂O, inHg, cmH₂O and mbar.
  • optional PC data logging kit includes RS-232 to USB adaptor.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (10 Feet, Black)

  • Simple 10ft null modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial cable male to female port cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • DB9 m/f adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 10 feet long RS232C cable for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

Tera Grand - Premium USB 2.0 to RS232 Serial DB9 Adapter - Supports Windows 11,10, 8, 7, Vista, XP, 2000, 98, Linux and Mac - Built with FTDI Chipset

  • OS SUPPORT - Supports Windows 10, 8, 7, Vista, 2000, XP, 98, Apple MAC OS8 or higher, Linux 2.4.0 and later, OpenBSD 2.9 and later & FreeBSD 4.7 and later.
  • USB2 TO RS232 - Installed as a standard Windows COM ports, Full RS-232 modem control signals, RS-232 data signals.
  • TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND.
  • CONNECT SERIAL DB9 DEVICES - Provides instant connectivity with modems, ISDN terminal adapter, PDA, bar code scanner, label printer, and devices with DB9 SERIAL ports.
  • Download the latest Windows 10 driver from Tera Grand's web site.
  • EXTENSION CABLE INCLUDED - Package includes a 32 inch USB male to female extension cable..
Check Stock

DTECH DB9 to RJ45 Serial Adapter RS232 Female to RJ-45 Female Ethernet Converter Compatible with Standard 9 Pin RS-232 Devices

  • A simple, cost effective solution to process serial data communication between RS232 COM port devices over inexpensive cat5 cat6 RJ45 network cable.
  • DB9 female to RJ45 modular adapter converts DB9 female connector into an RJ45 female connector (DB9 female - RJ45 Female pinout: 1-1, 2-2, 3-3, 4-4, 5-5, 6-6, 7-7, 8-8, 9-x).
  • A pair of DB9 to RJ45 socket coupler can be used a extender to extend rs232 serial signals up to 65ft.
  • Bi-directional DB-9 female to RJ-45 female converter comes with thumbscrews for easy and secure connection.
  • (Please be noted it's NOT 15 pin VGA video port) It's compatible with Standard 9 Pin D-sub RS-232 Devices e.g. computer laptop, printer, modem, router, PDA, POS device, digital CNC machine tool, Barcode scanner, etc..
Check Stock

DTECH DB9 RS232 Serial Cable Female to Female Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded DE9 female RS232 cable with AL foil.
  • DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control

  • BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
  • When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock