5.5 inch HDMI AMOLED Display with Toughened Glass Cover 1920x1080 Capacitive Touch HDMI Interface Supports Mini PC Raspberry Pi 4 3 2 1 Model B B+ A+ Computer Monitor @XYGStudy
5.5inch, 1920x1080, Capacitive Touch Screen AMOLED with Toughened Glass Cover, HDMI interface, Supports Multi Systems. Supports Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, Jetson Nano.
This is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience..
Supports popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers , When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie, driver free, When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.
Arducam IMX477 HQ Camera Board for Jetson, 12.3MP Camera Board Compatible with Nvidia Jetson Nano/Xavier NX, Raspberry Pi cm 3/3+ and cm 4
A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P..
Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control..
Plug-and-Play - You don’t need any hardware modification to work with jetson platform. Just a driver needed. More convenient than RPI official HQ cameras..
4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates..
Note：It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4)..
Jetson - Probiotic and Prebiotic Bundle Mood/Gut Prep - Support Healthy Mood Function and GI Tract - Gluten Free, Vegetarian, Non-GMO (62 Count)
Take 1 capsule each every morning, right before breakfast with cool to room temperature water. Mood has fat soluble vitamin D..
Mood contains 10B CFUs with 3 highly studied probiotic strains to help reduce stress related symptoms, depression and anxiety..
Gut Prep isn't like any other prebiotic. It contains both a prebiotic and a founding colony of probiotics that work hard to eliminate harmful bacteria in your gut, making room for the good bacteria to flourish..
A healthy gut is a major factor in overall wellness. An imbalanced gut can cause chronic inflammation. Achieving optimal gut health is done through probiotic strains that are diverse and alive. We do the work for you, Try all of Jetson's rotating formulas (Fit, Immunity, Mood, and Skin).
Our formulas are meticulously developed by scientists, nutritionists and physicians to create the most impactful probiotic for a healthy gut. All of Jetson's formulas are Gluten-free, vegan, and Non-GMO!.
Ingcool 2.9inch e-Ink Display Module, 296x128 Resolution Two-Color e-Paper Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo,SPI Interface Support Partial Refresh
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on..
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing.
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc..Onboard voltage translator, compatible with 3.3V/5V MCUs.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)
Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
WiKi for reference: wiki.geekworm.com/T300.
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)
Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
7inch HDMI LCD (H) (with case) 1024x600 Capacitive Touch Screen IPS Display HDMI Monitor with Toughened Glass Cover Case for Raspberry Pi 4/3/2/1 B B+ A+/Jetson Nano/Windows 10
Compatible with Raspberry Pi 7 inch touch display screen LCD, 1024x600 hardware resolution, configurable by software (up to 1920x1080),Toughened glass capacitive touch panel, 6H hardness.
Supports popular mini PCs such as Raspberry Pi 4/3/2/1 B+ B A+ zero zero w,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free.When works with Jetson Nano,supports Ubuntu, single point touch, driver free.
Multi languages OSD menu, for power management, brightness/contrast adjustment, etc..
3.5mm audio jack, supports HDMI audio output, Also supports VGA input (specific cable is required and should be purchased separately),High quality PC case, optional tilt angle: 30°/50°.
Makeronics Developer Kit for Jetson Nano -7inch Touch| IMX 219-77 Camera with Case| 64GB Class 10 TF Card with Card Reader | Jetson Nano Acrylic Case For Both A02 and B01| 8265 Wireless Card + Antenna
✔️Include Nano Acrylic Case(black),7inch HDMI LCD 1024x600 IPS Capacitive Touch Screen , 8265 wireless card with 6DB antenna,IMX219-77 camera board with camera holder, 64GB class 10 TF card along with a card reader. HDMI cable. Notice: Jetson Nano Board is not included. The newly updated case (start from 2020/07/15) is compatible for Jetson Nano board B01 and A02 Version..
✔️[Power on and Reset Function] Equippped with power switch and reset switch.
✔️[Dedicated PWM Cooling Fan] DC 5V,4Pin reverse-proof connector(with PWM function), Dimentsions 40mmx40mmx10mm,Make Sure Nano Work Stable..
✔️[Wireless-AC8265] Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Equipped with dual 6DBi antennas.
Metal Case with DC Brushless 5V PWM Fan for NVIDIA Jetson Nano Developer Kit,Cooling Fan and Metal Enclosure with Camera Holder Reset and Power Buttons Compatible with IMX219 Camera,Wireless-AC8265
The package includes Metal Case and 5V Dedicated PWM Adjustment Cooling Fan, for Jetson Nano Developer Kit. (NOTE: Jetson Nano Developer Kit is NOT included)..
The Metal Case with Clever design:easy access to the peripheral connectors.
with camera holder,dedicated place to mount your camera.
RESET and POWER buttons,It is easy to operate..
The Metal Case is Compatible with peripherals,eg:Camera: IMX219- 77 / 77IR / 120 / 160 / 160IR / 200 Camera, RPi Camera V2 / RPi NoIR Camera V2.
The metal case Structure Introduction:Camera holder, dedicated place to mount your camera.
Easy access to the extension header, with clear label.
Opening for onboard connectors and cooling fan.
The Fan supports 5V voltage.PWM Speed Adjustment, Strong Cooling Air.The Cooling Fan with 4PIN reverse-proof connector.Dimensions: 40mm×40mm×20mm.
