Best Embedded Microcontroller Support

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3,RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

44Pin IDE CF to 2.5 inch Compact Flash CF Memory Card to 2.5 inch 44Pin IDE HDD Laptop SSD HDD Adapter Card

  • Can also be directly inserted into the notebook IDE port..
  • CF card to 44PIN 2.5-inch IDE hard drive..
  • For notebooks, turn your CF card into a standard IDE electronic hard drive..
  • Used in embedded industrial PCs to store embedded for LINUX, WINCE and other operating systems and applications, data..
Check Stock

AITRIP 5PCS ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino

  • Package: You will get 5 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE Features:.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • The best power and RF characteristics are safe, reliable and scalable for various applications..
  • 5PCS ESP32 Development Board TYPE-C USB CH340C WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP32-DevKitC-32 ESP-WROOM.
Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock

Nextion Enhanced 2.4 inch Display NX3224K024 Resistive Touch Screen UART HMI LCD Module 320x240 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX3224T024, NX3224K024 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX3224K024 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Cisco Catalyst 9120AXI-EWC-B Wireless Access Point, Wi-Fi 6, 4x4 Dual 5GHz Radio, MU-MIMO, CleanAir with Cisco RF ASIC, Embedded Wireless Controller (EWC), PoE, Internal Antenna (C9120AXI-EWC-B)

  • POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Flexible Dual Radio with 5GHz and 2.4GHz or two 5GHz configuration, up to 5.38 Gbps data rate, uplink/downlink OFDMA, MU-MIMO, BBS coloring, TWT and Embedded IoT radios enabling BLE 5.0 and Zigbee.
  • CISCO CLEANAIR: Powered by Cisco RF ASIC, offer superior analytics and security.
  • ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices.
  • EMBEDDED WIRELESS CONTROLLER: Controller functions embedded in the Access Point for easy deployment, network monitoring, and troubleshooting. Support with WebGUI and mobile app (C9120AXI(E)-EWC models only).
  • PEACE OF MIND: 90-day software and limited lifetime hardware warranty.
Check Stock

Orange Pi 4 LTS 3GB LPDDR4 Rockchip RK3399 Six Core ARMR 64 Bit with 16GB EMMC, Single Board Computer Run Android, Ubuntu, Debian OS (Pi 4 LTS 3GB +16GB EMMC)

  • Orange Pi 4 LTS uses the Rockchip RK3399(28nm HKMG Process), and has 3 GB /4GB LPDDR4 SDRAM, 16GB EMMC Flash(option), 6-core ARMR64-bit processor ,main frequency speeds up to 1.8GHz..
  • Orange Pi 4 LTS Single Board Computer offers a range of different ports, including HDMI output, 26pin headers, LCD connector, 2*USB 2.0, 1*USB 3.0, 1*USB 3.0 TYPE-C, mini PCIE connector etc..
  • Orange Pi 4 LTS open source board mini computer is support for dual cameras, binocular vision ranging, power management, TF card Storage, support SATA and SSD expansion, LED indicator, Low-level peripherals, support 4K output..
  • This Orange Pi 4 LTS microcontroller is powered through DC and Type-C, and it can run Android 8.1,Ubuntu16.04,Ubuntu18.04,Debian9. It is a good choice for applications that need strong networking perfomance..
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
  • Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon service..
Check Stock

Thlevel 30A Solar Charge Controller 12V/24V Solar Panel Charger Controller with Adjustable LCD Display and Dual USB Port for Open AGM Gel Lead-Acid Batteries

  • 【Upgraded solar panel controller】 Solar charge controller 30a build-in industrial microcontroller for automatical management, memorizing various....
  • 【Safe to use】 Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. 12v solar charge....
  • 【LCD display】Solar panel charger controller with big LCD display, you can also switch modes and adjustable parameter, clearly indicate the status,....
  • 【Scope of application】 The solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries..
  • 【Easy to install】 The mppt solar charge controller should connect the battery first, then the solar panel, and finally the load!.
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

Orange Pi 4 LTS 3GB LPDDR4 Rockchip RK3399 Six Core ARMR 64 Bit with 16GB EMMC, Single Board Computer Run Android, Ubuntu, Debian OS (Pi 4 LTS(3GB 16GB)+Antenna Metal Shell)

  • Orange Pi 4 LTS uses the Rockchip RK3399(28nm HKMG Process), and has 3 GB /4GB LPDDR4 SDRAM, 16GB EMMC Flash(option), 6-core ARMR64-bit processor ,main frequency speeds up to 1.8GHz..
  • Orange Pi 4 LTS Single Board Computer offers a range of different ports, including HDMI output, 26pin headers, LCD connector, 2*USB 2.0, 1*USB 3.0, 1*USB 3.0 TYPE-C, mini PCIE connector etc..
  • Orange Pi 4 LTS open source board mini computer is support for dual cameras, binocular vision ranging, power management, TF card Storage, support SATA and SSD expansion, LED indicator, Low-level peripherals, support 4K output..
  • This Orange Pi 4 LTS microcontroller is powered through DC and Type-C, and it can run Android 8.1,Ubuntu16.04,Ubuntu18.04,Debian9. It is a good choice for applications that need strong networking perfomance..
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
  • Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon service..
Check Stock