Best End Bearing Oil

CGOLDENWALL Upgraded Oil Press Machine Automatic Oil Presser Cold Hot Press with Intelligent Control Panel/ LCD Touch Screen/ 6 Kinds of Temperatures Optional/ Food Grade Stainless Steel/ Built-in Thrust Bearing, Oil Extractor for Commercial Home Use

  • ... COLD&HOT PRESSING -- Our oil expeller supports two modes of oil pressing: cold and hot. Cold pressing better retains the nutritional value of the oil.
  • hot pressing can squeeze the oil more efficiently, and the oil will be pure and aromatic..
  • BUILT-IN THRUST BEARING -- The thrust bearing of our K28 oil presser is built into the motor, fundamentally rejecting the edible oil being contaminated by the engine oil and metal powder, and greatly increasing the service life..
  • WIDER PRESS RANGE & HIGHER OIL YIELD -- More than 24 kinds of materials, such as White Peanut(38-47% oil yield), Black Sesame(41-49% oil yield), Sunflower Seeds(35-48% oil yield), Walnut(50-60% oil yield), Almond(49-55% oil yield), Hemp Seeds(27-37% oil yield), Hazelnut(48-55% oil yield), Flaxseed(29-38% oil yield), etc..
Check Stock

BRONSON SPEED CO. G2 Skateboard Bearings - Set of 8

  • Deep Groove raceways balls roll deep in raceway channels reduces side impact damage & breakage.
  • Straight edge frictionless shields pop off resistant holds oil in, dirt and moisture out easy to clean.
  • Micro Groove raceway surfaces linear microgroove surfaces improve bearing lubrication, speed and spin.
  • Max impact cage design non distortion custom cage keeps the balls precision spaced & oil circulating.
  • Balls out technology eliminates shield and cage contact on impact for a go fast, stay fast bearing.
Check Stock

4pcs SI5T/K PHS5A 5mm Right Hand Female Thread Metric Rod end Joint Bearing SI5TK

  • FEATURES: 5mm Bore Self Lubricating Female Right Hand.M5X0.8mm rod end bearing.
  • Large load capability,easy mounting and dismounting and mechanism simplification..
  • Made of high quality metal with nickel plating for long life..
  • Rod End Ball Bearing is widely used in machinery, power tools,automation equipment, CNC equipment, and so on..
Check Stock

Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude

  • Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
  • Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
  • Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
  • Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
  • High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check Stock

CBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

CBRIGHT 4 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial..
  • Product Material: bearing steel. Axial simultaneous joint load..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • 4 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

Bobrick 7128 TrimLineSeries 304 Stainless Steel ADA Surface-Mounted Automatic Hand Dryer, Satin Finish, 115V (Pack of 2)

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Bobrick 7128 TrimLineSeries 304 Stainless Steel ADA Surface-Mounted Automatic Hand Dryer, Satin Finish, 115V (Pack of 4)

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Bobrick 7120 TrimLineSeries Zinc-Plated Steel ADA Surface-Mounted Automatic Hand Dryer, White Epoxy Finish, 115V

  • Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
  • Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
  • Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
  • Dryer shall turn off automatically when hands are removed.
  • Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes.
Check Stock

Dirt Devil Royal Upright Vacuum Cleaner Ball Bearing Hex End 14 Inch Brushroll Assembly # 2673273000

  • Plastic end Genuine Dirt Devil/Royal Vacuum Cleaner Brush Roll Roller.
  • Please Note: this will be plastic end caps not metal.
  • Ball Bearing Hex End 14 Inch Brushroll Assembly # 2673273000/2655225000.
Check Stock