Best Ender Inciarte Jersey

Creality CR Touch Auto Bed Leveling Sensor Kit with Metal Push-Pin for Ender 3V2/Ender3/Ender3 Pro/Ender3 MAX/Ender 5/Ender5 Pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • Compatible: This CR Touch newly design fits for Creality Ender3 v2/Ender3/Ender3 Pro//Ender3 Max/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7)....
  • Easy to install and use:Download firmware from Creality official website to the TF card or memory card.
  • Directly insert it into the printer to update....
  • Smart compensation: CR Touch performs multi-point detection on the printing platform and records the heigh of each detection point. The system builds....
  • Wide application and Long service life: Compatible with ABS,PLA,glass,metal,plastic and all materials. It can be reused for more than 100000 times due....
  • PLEASE NOTE: It requires a firmware update by yourself. If you have any questions while installing or using, please feel free to contact us. We will....
Check Stock

Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer

  • Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If....
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

Creality Ender 3 V2 3D Printer with Silent Mainboard Meanwell Power Supply Glass Bed and Resume Printing Ideal for Beginners Printing Size 220x220x250mm

  • 【Convenient printing】The upgraded ender 3 v2 3d printer can directly use the SD card to print and upgrade the firmware. These upgrades make....
  • 【Self-developed Silent Motherboard】 Creality Ender 3v2 with TMC2208 stepper drivers and 32 Bits Silent Mainboard of version 4.2.2 always ensures....
  • 【Tempered Glass Bed】The Glass Bed is an upgrade of Ender 3 and Ender 3 Pro. It has excellent adhesion and faster heating speed. When you using the....
  • 【Beginner Friendly】Creality Ender 3 V2 is an ideal FDM 3D Printers for DIY Home and School for Beginners, offers easier to understand operations,....
  • We are devoted to providing high-quality and economical 3D printers, excellent after-sales service to all customers. The 24-hour quick response and....
Check Stock

Creality Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro Constant Temperature Protective Cover Room

  • Constant Temperature: Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when....
  • Inner Size: 17.5*22.2*26.9 inch. Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing..
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself....
  • Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are....
  • Extensive functionality: Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as....
Check Stock

PEI Magnetic Flexible Frosted Surface Heated Bed 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Pro X/Ender 5/Ender 5 Pro 3D Printer

  • Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance..
  • The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety..
  • Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off..
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..
  • Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro.Compatible with PLA/PETG/PEEK/ABS and any other filaments..
Check Stock

ENOMAKER Creality Sonic Pad in Klipper Firmware 64-bit 3D Printing Smart Pad 7" Touch Control Screen Speed Up Printing Remote Control for Creality Ender 3 V2,Ender 3 S1/Pro and Other FDM 3D Printers

  • ... 【Wide Compatiblity】The Creality 3d pad is compatible with most FDM printers that come with a USB interface. The user-defined printer compilation function is integrated into the Sonic Pad, making it much easier to use Sonic Pad with non-Creality printers than before. Pre-configured Ender 3 V2, Ender 3 S1, Ender 3 S1 Pro, Ender-3 Pro, Ender 3 S1 Plus, Ender3 MAX, Ender 5 Plus, CR-10 Smart, CR-10S Pro V2, CR-10 V3. The rest of Creality FDM printers will catch up soon..
  • 【Control Access from Multiple Platform】It can be operated directly from the Sonic Pad touch screen. Or remotely control from the web UI when a LAN is connected..
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

5PCS Creality 3D Printer NTC Thermistor 100K NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila XH2.54-2P Connector 1m/39.4inch

  • Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors..
  • Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying..
  • After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • ...obe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
  • 【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7 motherboard 3D printers. This CR Touch does not work for 8-bit motherboards, please clarify what version your motherboard is before buying..
  • 【Easy Installation】First, choose the appropriate mounting bracket according to your printer, and install this CR Touch auto-leveling kit to your 3D printer. Download the CR Touch program from the Crealtiy official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. Turn on the power, and the program can be updated intelligently after the power is turned on..
Check Stock