Electricity Usage Monitor Upgrade Power Meter Plug with Extension Cord,Digital LCD Display 8 Mode Energy Meter Plug with Overload Protection for CO₂Emission Volt Amps Watt kWh Consumption Analyzer
【Electricity Usage Monitor with Extension Cord】Use this power meter to monitor the real-time and standby power consumption , current and electricity cost of your electrical appliance, help you save energy and money, Reduce CO₂emissions, environmental friendly. The Extension Cord will improve the utilization of your outlet..
【Upgrade 180 ° Blue Backlit LCD Display】The power consumption monitor with digital large backlit LCD display,180° full wide view clear visible, make you easy to read and record the data, especially in the darkness,protect your eyes.NOTE: Please read the digital from the front, not from the side view..
【Upgraded Practical 8 Function Modes】The UK Plug Home Energy widly use to monitor CO₂ Emissions(CO₂/KG),Power(W), Energy (kWh), Voltage, Amps, Hertz, Power Factor and Minimum and Maximum power. 8 modes for your choice,ideal for energy consumption monitor of home appliances..
【Overload Protection】When the whole power exceeds the rated power of monitor, LCD will display "OVERLOAD" with booming noise to warn the user, which is kind of great help on reduce consumption and protect device from damage..
【Data Memory and Clear】Multifunctional energy can store the last data so you can read the data after the power mete....
Authentic Genuine Nagoya TB-320A Fold-Over 39-Inch PL-259 Mount Tri-Band 2m/1.25m/70cm (144/220/440 MHz) Antenna, Includes NMO to UHF (SO-239) Adapter
Fold over design allows the Antenna to Fold-Over which allows you to easily put the antenna down in parking garages or in other places where height matters..
PL-259 with included NMO to UHF Adapter, Tri-Band VHF, 1.25M, & UHF (137-174, 220-225, 400-520 Mhz), Weatherproof.
The TB-320A is the ideal antenna for FM operation on 2 meter, 1-1/4 meter (220), and 70-cm bands..
Easy To Install, Omni-Directional, Requires NMO or UHF antenna Mount (Nagoya RB-50 Magnetic Mount Recommended), Measures ~38.5 inches, Stainless Steel Antenna.
Pairs Great with the BTECH UV-25X4 or BTECH UV-50X3.
bayite AC 80-260V 100A BAYITE-PZEM-061 LCD Display Digital Current Voltage Power Energy Multimeter Ammeter Voltmeter with Current Transformer CT
The meter can only measure the active power(real power). It doesn’t show Apparent power. If you measure power from a DC-AC inverter please make sure it’s PURE SINE WAVE. Otherwise the meter can be burnt or melted.
Voltage test range: One-Phase 80~260V AC Power, 50/60HZ.
Store energy data when power off(can be reset)..
Large-screen LCD (display voltage, current, active power, energy at the same time)..
The blue backlight can be turned on/off manually. The CT can be either on Live line or Neutral Line..
Solarmeter Model 9.6 Visible Red Light Meter, Handheld Digital Radiometer and Light Bulb Tester for Measuring Red Light for Collagen Stimulation & Wound Healing Lamps, 0-1999 μW/cm², Made in USA
Get an Accurate Reading - Don't take chances with ineffective or out of spec bulbs in your facility's medical equipment.
Checking the intensity of phototherapy bulbs is essential.
Now it's easier than ever to maintain your collagen stimulation and wound healing lamps.
Standard Red Light Meter - Measures 577 nm to 661 nm.
An essential tool for monitoring the intensity and aging of red LED lamps, red fluorescent bulbs, and HID lamps.
Also measures outdoor red light and photosynthetic action spectrum red band for gardening.
Change Your Lamp Bulbs on Time - Special purpose bulbs decay over time and stop emitting the amount of red light that they should, leading to undesirable results.
With our Solarmeter, keeping track of your bulb's performance is easier than ever, and so is knowing when it's time to change it.
Easy-to-Use - Compact, handheld, and durable, our Solarmeter Red Light Tester features simple single-button operation and an easy-to-read LCD Display.
Powered by one 9-volt DC Battery (included) which lasts up to 2 years depending on use, this UVC light meter boasts NIST Traceable accuracy.
About Us - Solarmeter by Solar Light Company Inc. is the industry standard for UV and visible light radiometers that measure both indoor and outdoor light source....
welltop Watt Meter, Electricity Usage Monitor, Plug-in Socket Power Meter, Portable Micro Voltage Socket Power Meter with Digital LCD, Auto Cost Calculator, 7 Display Modes, Overload Protection
【Electricity Usage Monitor】-Electricity Usage Monitor features 7 testing moldes，can not only measure Power (W), Energy (kWh), Current (A), Voltage (V), Power Factor, Cost, Max Power, Min Power, etc. but also calculate cost automatically after price-setting, it is the killer of the high-cost energy appliance, helping you lower power consumption and save money..
【Refined Accuracy】-Power Meter Socket has a high precision current sensor, can ensure you the best accuracy-Class 1.0 with 0.01W, 0.1V and 0.01A resolution..
【Digital Backlight LCD Display】-The Voltage Watt Energy Meter is built with a large backlight LCD digital screen which can be seen from far away and is very easy to read in good light or darkness..
【Built-in Battery & Data Stored】-The Electric Usage Monitoring Socket itself comes with 3.6V rechargeable battery(NI-MH), which can the information if you turn the plug off at the mains. Don’t worry about losing your data..
【Overload Protection】-Once the load exceeds 16A or 3680W, there will be a flashing “OVERLOAD” icon on the screen, so you will know which appliance is high energy consumption, or if in case things go wrong. This helps a lot in ensuring electricity safety and minimizing the loss..
Battery Monitor, DROK Amp Volt Power Watt Meter DC 0-300V 200A STN LCD Display Panel Meter, Current Voltage Energy Capacity Ammeter Voltmeter Multimeter Gauge with Hall Sensor, 2.5m Shielded Wire
Multifunctional Meter ---- DROK multimeter panel measures percentage and AH of remaining battery capacity, DC positive and negative bidirectional current, DC voltage, DC power and DC accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A..
Hall Sensor & Easy Mount ---- The voltage amperage meter is equipped with a Hall transformer for isolated measurement, which is more reliable and safer. Both two-wire and three-wire connection are available, two wires for testing 5-90V, three wires for monitoring 0-300V. Much more convenient with the long 2.5m shielded wire..
STN LCD Screen ---- The backlight of this battery capacity monitor can be controlled to be ON or OFF at user’s need.
Equipped with full view STN LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine..
Alarming Function ---- The tester will alarm and flash when the real voltage or current is higher or lower than preset alarming ones, or the remaining capacity of battery is low..
Wide Applications ---- Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithi....
Maxmartt Energy Meter, 5-32A 110-130V 60Hz LCD Backlight Single Phase Energy KWh Meter DIN Rail Mounting
1.ACCURATE AND RELIABLE: Adopt microelectronics and digital processing technology to measure electric energy .circularly displays voltage, current, power and energy KWh.
2.STABLE PERFORMANCE: Internal integrated circuit is manufactured with precision SMT technology, with good electromagnetic interference resistance..
3.CLEARLY DISPLAYED: This energy meter can measure positive active energy in electric energy measurement, which is clearly displayed by LCD backlight screen..
4.SMALL SIZE: light weight, 35mm DIN rail mounting..
5.IT HAS LOW POWER CONSUMPTION: high precision, high overload, electricity anti-stealing..
TopTes TS-630 Wood Moisture Meter with 3 Color Backlight Display, Moisture Meter for Firewood/Drywall, 2.25-inch LCD Screen with Dry-Moisture-Wet Display, 2 Mode 7 Calibration Scales - Orange
... a pin-type moisture meter and operates on batteries. With a high precision multi-material sensor, DON’T need calibration. It’ll support an accurate reading after inserting the stainless steel pins into the surface of the wood or building materials. It will auto shut off after 10 minutes of non-use to help save energy. A low-battery indicator will appear on the screen when the battery is running out.
【What's in the Box】1x TS-630 Moisture Meter, 3x AAA Batteries, 1x User Manual, 1x Carry Pouch, 1x Pair of Test Pins, 1x Mini Wrench. TopTes wood moisture meter with a 3-year Warranty and lifetime technical support. Please feel free to contact us if you have any questions or concerns.
Digital Power Meter Wattmeter Energy Consumption Meter Watt Voltage Current Frequency Electricity Usage Monitor Plug-in Socket Design
PLUG-IN DESIGN: Simply plug the meter into the wall socket then plug the appliance into the power meter. It helps user in saving money and energy by identifying power consumption of each appliance. It has wide working voltage range of 100~260V..
DISPLAY: Large LCD display with backlight function making it easy to read data even in the dark. Screen shows the Watt, Current, Voltage, Frequency, Power Factor and CO2 emission volume..
OPERATION: Button is designed for easy operation and very convenient for daily monitoring of electrical appliances thus making the energy consumption clear..
OVERLOAD PROTECTION: If the power of the electrical appliance exceeds the setting value of power alarm upper limit, the backlight will flicker to indicate user that the power exceeds the limit..
USAGE: Can be used in schools, offices, laboratories, factories and even in the home in monitoring power consumption of a connected or standby appliance..
