Best Engine Bearing

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil is changed in your vehicle to maintain your engine's health..
  • 2 Year or 24,000 Mile Warranty - This engine oil filter comes complete with a 2 year or 24,000 mile warranty whichever comes first. If the part ever ....
Check Stock

Cam Bearings, Double Thrust, For Type 1 VW Engines, Compatible with Dune Buggy

  • 100% machined surface design provides the tightest tolerances in the industry. Increased system design flexibility..
  • Constructed of seamless steel tube with a thin layer of lead based Babbitt material.  Seamless construction makes installation easy, eliminating breakage and bearing surface interruptions..
  • Lead based Babbitt provides ideal properties for nearly all engine applications.  Superior embed ability, conformability, and anti-seizure characteristics have proven to reduce engine failures.
  • Manufactured to meet or exceed OE specifications.
Check Stock

OSBUN Motorcycle Spanner Wheel Removal Change Tool Wrench Set Compatible with Africa Twin CRF1000L/ADV 2016-2020 Anodized Aluminum (Red)

  • 【Function】This set can easily remove/install Gimbal bearings and alignment tools for engine alignment..
  • 【Features】This set includes eye bolts, so you can hang alignment tools. The blind hole puller is locked in the inner ring of the bearing. The tool makes it easy to pull the bearing, just use a wrench to turn the end of the tool to pull the bearing. Volvo's sliding hammer jaws no longer have the trouble of being stuck and broken..
  • 【Fitment】Fits for Mercruiser Alpha, Alpha 1, MR, bravo's, OMC cobra's and Volvo..
  • 【High Quality】This set made of high standard carbon steel which can withstand corrosion, rust and impact, with nice black Oxide finish, ensures an unparalleled long lifespan..
  • 【Note】A hole needs to be drilled in the alignment tool to install the universal bearing driver..
Check Stock

Outboard Motor 6.5HP 4 Stroke Boat Engine Motor Water Cooling & CDI for Fishing Aquaculture Outdoor Adventure Boat

  • ✿【Superiority】The 6.5hp 4-Stroke Outboard Motor provides all the power you need for motoring in a small craft. This engine does that as well as....
  • ✿【Water Cooling System】Superior engine water cooling system is for improving engine performance, long working time and good durability..
  • ✿【Application】The machine itself is lightweight, it can use on boat weight of 100kg or less, load-bearing 4 people. It can be marched with....
  • ✿【Best Service】Quality Guarantee is the basic rule. We are dedicated to providing quality services, quality products and fast delivery(US....
Check Stock

Remington RM1159 Walk-Behind High-Wheeled String Trimmer

  • 159cc OHV GAS ENGINE: Powerful 4-cycle gas engine helps you clear the tallest, toughest grass and weeds..
  • 22-INCH CUTTING SWATH: Unique shape makes trimming around fences, garden beds, and other landscaping borders easier cutting bigger jobs down to size..
  • USER FRIENDLY: Off-set trimmer head feature helps to trim hard-to-reach places while the 14-inch ball-bearing wheels help you move easily through rough terrain..
  • COMFORT FOLDING HANDLE: Equipped with a comfort folding handle for convenient storage and transportation..
  • TRIMMER LINE: STANDARD 0.155” DIAMETER..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

JEGS Folding Engine Stand | Geared Rotating Head | Yellow Finish | 1000 LBS Capacity | 360 Degree Adjustable Mounting Head | 4 Ball-Bearing Swivel Caster Wheels | Heavy-Duty Steel Frame

  • ROTATE YOUR ENGINE to any position for low and top end engine assembly and disassembly.
  • HEAVY GAUGE SQUARE STEEL TUBE CONSTRUCTION disassembles effortlessly for storage or transport.
  • CONVENIENT ball-bearing swivel casters allow you to move the stand around the work area with ease.
  • ORGANIZE AND STORE the engine stand when not in use with easy disassembly design.
  • UNIVERSAL FITMENT HEAD DESIGN is compatible with many manufacturers such as Ford, Chevrolet, Dodge, as well as import engines.
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • ... solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
  • The engine runs on Unleaded 87+ octane Gasoline (10% or less ETHANOL recommended).
  • SAFETY & PROPER USE - The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always w....
Check Stock

Apeixoto 513296 Front Wheel Bearing Replacement for Nissan Quest Pathfinder Maxima Murano Infiniti QX60 JX35 with 5 Lug Front Right and Left 2PCS Wheel Hub Assembly

  • Fitments: This front wheel bearing hub assembly is compatible with 2009 - 2017 Maxima (All Models), 2011 - 2017 Quest (All Models), 2009 - 2017 Murano (All Models), 2013 - 2017 Pathfinder (All Models 2014 3.5L Engine ONLY), 2013 Infiniti JX35 (All Models), 2014 - 2017 Infiniti QX60 (All Models). You can double check the fitment in the production below or the fitment bar above..
  • OE Replacement: The Apeixoto front wheel bearing hub assembly is a direct OE replacement. The replacement oe part # is 513296, HA590252, BR930745.
  • Premium Quality: The Apeixoto wheel bearing is constructed with 65 Manganese Steel which is much stronger than normal 55 and 45 steel. And 65 manganese steel can endure much more high temperature.All our production line is equipped with the US and South Korean apparatus which are more precise..
  • Quality Control: We offer 2 year warranty for Apeixoto wheel hub assembly. Every piece of Apeixoto wheel hub bearing will be tested many times before entering the markets. All of our workers and engineers have over 10 years working experience. Every wheel hub bearing will be tested every 1 hour during production and will be tested again after production to block down all unqualified products..
  • Easy Installation: There are two front wheel bearing ....
Check Stock

AlphaWorks Gas Engine 7HP Motor Horizontal 4 Stroke OHV Recoil Start 3600RPM 8.85Ft-Lbs/12Nm Torque 3/4\ x2.43” Shaft 3/16\ Keyway 5/16”-24 UNF End Tapped Go Kart Log Splitter EPA/CARB Certified

  • ...-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
  • The engine runs on Unleaded 87+ octane Gasoline (10% or less ETHANOL recommended).
  • SAFETY & PROPER USE - The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate ANSI standard hand & eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING). ONLY use thi....
Check Stock