TFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW
【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
Packing size:133x71x38.5cm/52.3''x27.9''x15''.
【Main Parameters】Control System: #93 gasoline.
Recommended Propeller range: 3 -9"1/4''x8".
Recommended Lubricant: 2 Stroke Lubricating oil.
【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
After use, the fuel in the carburetor must be completely discharged..
【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver
Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Aintier Radiator or AC Condenser Engine Cooling Fan Clutch 2790 Replace Fit for Dodge Durango/Dakota/D150/D250/D350
... INSTALLATION – Step 1: Remove the fan shroud.
Step 3: Rock from side to side. Step 4: Remove the bolts.
Step 7: Put the fan back into the engine..
FEATURES – Turns the fan 70-90% of the shaft speed when engaged for increased cooling.
Turns the fan 25-35% of the shaft speed when disengaged.
Used with deeper pitch fans (2-1/2″of pitch).
Land and groove design with up to 27 square inch of working surface.
Identified by finned aluminum face plate and thermal spring on the front.
PACKAGE INFORMATION – 1 piece of engine cooling fa clutch,and our professional customer service team,please fell free to contact us if you have any questions.
150CC GY6 Complete Engine Motor, 4 Stroke Single Cylinder Long Case Engine Motor Kit for Scooter ATV Go Kart CVT CFW + CDI (USA STOCK)
☀【Engine Specifications】Engine Type: GY6 Single Cylinder 4-Stroke.
Engine oil type: SF15W-40 not come with oil.
Carburetor Type: Horizontal Vacuum Carburetor.
☀【CVT design】CVT is mainly composed of 2 transmission belts and 2 transmission pulleys. It adopts a compact and simple design, which can seamlessly switch between an unlimited number of different gear ratios to achieve smooth acceleration..
☀【Lubricating oil filter】Helps to remove solid pollutants in the lubricating oil, greatly reducing the wear of the friction pair and prolonging the service life of the engine. High-flow Oil Pump: Reduces the wear of friction pairs and prolongs the engine service life..
☀【Forced air-cooled engine】The outside of the cylinder is covered with metal fins. When the cooling fan blows air over the fins, the heat generated by the engine is directly released into the air. It has the advantages of simple structure, light weight, wide adaptation to climate change, quick start-up, and no need of radiator..
☀【Logistics and Service】Sometimes the carrier is not very good at taking care of our packages, so it may cause some damage in trans....
TRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)
2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
MOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)
MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver
63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.
SUNROAD 50cc Bicycle Engine Kit 26' 28' 2-Stroke Motorized Motor Bike Kit for Mountain and Road Bike Cycle Motor Kit Black
This 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike, you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter..
Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
