PACKAGE INCLUDE:1 Timing Belt (142 teeth),1 Water Pump with gasket,1 Timing Belt Tensioner,1 Timing Belt Idler Roller,4 Camshaft Seals,1 Crankshaft Seal..
FIT FOR :Replacement for timing belt kit water pump 2003-2006 for VOLVO XC70 XC90 2.5T, 04-06 VOLVO S80 S60,engine from 3188689 and other models below..
OEM STANDARD:All the components are produced under strictly observed and meet OEM performance requirements,part number 30751700, 30637955, 274338, 8630590.
SUPER QUALITY:High performance material can reduce the crack caused by belt deformation and extend the service life..
ADVANTAGE:Less noise, less resistance and smoother operation,it can make the normal power output and acceleration performance of the engine, reduce the spoilage of the car..
palart 1 Set 3/4" to 1" inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter for Predator
Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Gas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key
Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs
Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
ACDelco GM Original Equipment 12680750 Timing Chain Kit with Tensioner, Guides, Nozzle, Seal, and Bolts
Synchronizes the rotation of the crankshaft and the camshaft(s) to help ensure that the engine's valves open and close at the proper time during each cylinder's intake and exhaust strokes.
Contains necessary parts to replace your vehicle's engine timing chain.
GM-recommended replacement part for your GM vehicle's original factory component.
Offering the quality, reliability, and durability of GM OE.
Manufactured to GM OE specification for fit, form, and function.
MOOSUN 30 Series Torque Converter Driver Clutch 3/4' Bore Go Kart for Comet 219552 5957
This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers..
Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one..
This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load..
Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car..
DTS New Oil Pressure Sensor Switch PS417 Replacement for Infiniti, Nissan
FITMENT - Oil Pressure Sensor fit for 2004-2009 for Infiniti QX56,2003-2009 for Nissan 350Z,2005-2006 for Nissan Altima,2005-2008 for Nissan Armada,2005-2009 for Nissan Frontier,2009-2010 for Nissan GT-R,2004-2009 for Nissan Pathfinder,2009 for Nissan Sentra,2004-2008 for Nissan Titan,2005-2009 for Nissan Xterra.
FUNCTION - The crankshaft sensor can accurately and quickly feed back the position information of the crankshaft to the ECU, enabling the ECU to accurately analyze the cylinder compression to determine the ignition timing, which will improve the engine ignition efficiency and allow you to get a faster start and acceleration experience..
ADVANTAGES - 100% brand new aftermarket unit built to meet OEM specifications. Shipping from USA, fast shipping and good service. Factory price with higher cost-effective..
NOTICE - Please check picture,part number and fitment chart before placing order. For whatever we can help, please feel free to tell us via Email. We are always here for help you.
