The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Full Engine Mount Adapter Plates Urethane Swap Kit Compatible with GMC Sonoma S15 Chevrolet Blazer S10 LSx LS1 LS2 LS- Conversion Motor Mounts+Frame Mount Adapter Plate
Full Engine Mount Adapter Plates Urethane Swap Kit Fit：1982-1990 GMC S15.
1991-2004 GMC Sonoma(Compatible with 1983-2005 Chevrolet Blazer & S10 pickup 2WD 1983-2005 GMC Jimmy, S15 & Sonoma pickup 2WD)..Originally equipped with a 2.8l Chevrolet engine.see more detail in(Product description).
1/4" laser cut steel multi position design for extreme durability..
Includes: (x8) flange head engine mount bolts,(x2)motor mount bolts, washers & Hex nuts ,(x2)1/4" laser cut motor mount adapter plates,(x2)2.8L Urethane Frame Mounts .As the picture shown..
Material：High quality steel constructions. Built to strict quality control standards. Instruction is not included..
Note: S10 LS Swap brackets allow installation of LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8L 5.3L 6.0L 6.2L engine..
Qiilu Expansion Tank Cap, Radiator Coolant Expansion Tank Cap 17932-63J00 Replacement Fit for Suzuki Swift
[ Quality Material ] --- This radiator coolant tank cap is made of high quality ABS material, which is durable, impact-resistant, lightweight, non-rusting, and has a long service life..
[ Applicable Model ] --- This radiator expansion coolant tank cap is a practical parts fit for Suzuki Swift 2005-2010, for Splash Vitara 2016+, for S-Cross Grand Vitara 2007-2015..
[ Easy Installation ] --- This expansion tank cover is easy to install, original standard, direct replacement for the old or broken one, perfect match..
[ Perfect Replacement ] --- Precision-molded to OE Cap dimensions to ensure compatibility with original and aftermarket coolant recovery tanks. Quality Cap and seal materials resist engine heat and harsh cooling system environment..
LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock
✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
Hisoo 2 Pack LED Light Engine Retrofit Kit, 6inch 24W 2200Lm, 3CCT 3000K/4000K/5000K Dimmable, Ceiling Fan Light Kits, LED Light Engine for Ceiling Light, Ceiling Fan Light, Pendant, Lantern
【3 Color Changing Temperature】You can preset your preferred light color temperature before installation: warm white(3000K), cool white(4000K), or daylight(5000K).
【Dimmer 5-100%】The LED light engine retrofit kit suitable for most LED dimmers on the market, and realize the smooth adjustment of brightness from 5% to 100%.
【Easy Installation】Every LED light engine is equipped with 3 wire nuts, and customers have two installation methods. One method is to use a center threaded screw type ceiling lamp to install, another way is to mount directly to a flat clamp base with magnet feet.
【Wide Applications】This LED light replacement kit can replace ceiling light, ceiling fan light, pendant light, thread type ceiling lamp, surface mount ceiling lamp, wall light.
【Energy Saving】Uses 24 watts while providing 2200 lumens of bright light. Replacing an incandescent light bulb with an LED ceiling light board saves 85% on your electric bills.
iSportgo Camera Clamp Mount Gopro Mount for Cameras / Video Lights / Monitors / Gopro Hero...
This Clamp mount with 1/4" screw, made of plastics and rubber..
applicable for some cameras,lights, video lights, monitors,gopro hero etc,install on cross bars,tubes,handlebars,tripods etc.
Clamping Diameter range:16-40mm(0.6-1.5in),kindly try to measure the Diameter of tube before you purchase it.
Rotate the Nut plate upward, it could Lock the device in right place and direction.
Easy to Install,multi-angle rotation .If the mount do not meet your need or any question, our customer service are free-hassle for you to resolve your issue and accept replacement or refund ..
Airuida Wall Mount Kitchen Sink Faucet 8 Inch Center Double Cross Handles Swivel Spout Matte Black Commercial Sink Utility Laundry Sink Mixer Tap
[Material]:Manufactured from solid brass with Lead-Free Waterway for sturdy and heavy-duty.strong tarnish and corrosion resistance.It will not leak..
[Design]:The Spout designs with 360-degree swivel which rinses to every corner of the sink,2 installation methods,which you can choose wall mount or commercial sink mount..
[Function]:The hot and cold mixer valves with two cross handles for control the temperature and water flow..
[Installation]:Wall mount kitchen sink faucet.Easy for installation.Come with installation instruction..
[Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
[New Generation] Motorcycle Highway Pegs Foot Rest Fit for Harley Sportster Dyna Touring Street Glide Road Glide Road King Electra Glide with 1 1/4 inch Engine Guard (Chrome)
[Condition]:The foot pegs made of premium quality metal and rubber,strong and durable,not easy to came off.
[Upgarded Clamp]:①New generation mount clamp ,firm grip the engine guard ② Easy installation,no need modification.
[Adjustable Pegs&Mount Clamp]:The foot pedal and mount clamp is 360 adjustable,you can adjust comfortable angle and position.
[Fitment]:Fit for Harley sportster Dyna Touring Road King Street Glide Road Glide Electra Glide with 1 1/4 inch highway bar.
Universal fit for other models with 1 1/4"(32mm) engine guard(If your engine guard diameter is not 1 1/4 inch,they will not fit).
[Package]:1 pair highway pegs +Mount clamp kit(As the picture show).
91018040 Engine Swap Weld-In Motor Mount Kit Compatible with Chevy Small & Big Block SBC BBC
【COMPATIBILITY】 Universal engine mount compatible with Chevrolet Small & Big Block 350 396 454 Engine. SBC/BBC and 4.3L V6 engines..
【FUNCTION】These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing mounts..
【MATERIAL】Features polyurethane bushing for vibration free performance and long bushing life.
【PERFORMANCE】4 9/5" tall weld on steel frame plates allow for customization to your specific chassis.
【PACKAGE CONTENTS】2x Weld-In Motor Mount,2x Blots,4x Frame Plates .Please contact us if the package you received is missing parts..
KONDUONE Motorcycle Highway Pegs Foot Rests fit 1.25\ Engine Guard Parts Replacement for Harley Davidson Road Glide, Electra Glide, Road King, Street Glide
【NOTICE】: Please buy real product from KONDUONE shop, we offer a 12 month warranty, true worry-free shopping experience..
【Package Includes】: 1 Pair of Engine Guard Highway Foot peg (Left & Right) + Set of Allen Wrench..
【Adjustable】: Heavy duty product with an excellent chrome finish with durable rubber insert. The foot rest rotates which makes it adjustable to any angle..
【Quality Assured】: Chrome highway pegs to fit 1.25" engine guards commonly found on Harley-Davidson motorcycles.Direct replacement for a proper fit and easy installation..
【Compatible】: Fit for 1985-2018 Harley-Davidson V-Rod,Tri Glide,Street Rod,Street Glide,Sportster 883,Sportster 1200,Softail,Seventy Two,Rocker C,Rocker,Road King,Road Glide,Night Train,Night Rod Special,Iron 883,Heritage Softail,Forty Eight,Fatboy Lo,Fatboy,Electra Glide,Dyna,CVO,Cross Bones,Blackline and so on..
