Best Engine Oil Cooler Hoses

Amsoil FLSHCN-EA Engine and Transmission Flush 16-oz Bottle 1

  • Prepares engines and transmissions for new oil.
  • Removes deposits and sludge for improved efficiency, fuel economy and lower emissions.
  • GASOLINE AND DIESEL ENGINES --Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions --Helps quiet lifter noise --Promotes....
  • AUTOMATIC TRANSMISSIONS --Cleans deposits in oil cooler and ports --Helps unclog fluid passages --Cleans deposits and varnish from clutch plates,....
  • APPLICATIONS: AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. Do not use it in....
  • DIRECTIONS: Works in 1 treatment. Is safe enough to use every oil change. ENGINE: Add bottle to engine oil fill port. Idle for 10-15 minutes, then....
Check Stock

Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2014-2017 Jeep Wrangler Dodge Challenger Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors

  • *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made with new ABS, NOT recycled ABS( which will leak after using for 6 or fewer months.).
  • Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Even the seal is made of good rubber. Well-made copper base and port. Intake Manifold Gasket Set is made of high-quality silicone..
  • This Engine Oil Cooler Filter is Compatible with 3.6L 2014-2017 Jeep Wrangler Grand Cherokee Dodge Avenger Challenger Charger Caravan Chrysler Town & Country..
  • Oil Cooler is Replacement for 2014 2015 Dodge Durango.
  • Ram C/V. 2014 Dodge Avenger.6 Cyl 3.6L. 2014 2015 2016 2017 Chrysler 200,300.
  • This Cooler comes with Temperature Sender Sensors! Tips: To prevent leaks or other problems, make sure each washer is installed in the right place. Please make sure that the oil port/hole is appropriate, some users said that the size is too large for their models, only simple grinding can be normal installation. Any questions, please contact us for help..
Check Stock

Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2011-2013 Jeep Wrangler Dodge Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors 5184294AE

  • *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made of new ABS, NOT recycled ABS( which will leak after use for 6 or fewer months.).
  • Seal upgrade, New Fluororubber gaskets are more durable, Oil and temperature resistant. Even the seal is made of good rubber. 12 pcs Intake Manifold Gasket Set is made of high-quality silicone. Well-made copper base and port, as well as the thread sealant on sensor connectors, can maximumly prevent oil leakage..
  • This Engine Oil Cooler Filter is Compatible with 2011 2012 2013 Jeep Wrangler Grand Dodge Grand Caravan Chrysler 200 300 Town & Country Ram 1500. OE 926-876,926-959, 5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB. Please check the fitment before ordering..
  • Oil Cooler is a Replacement for 2011-2013 Dodge Journey.
Check Stock

OKOOLCAMP Oil Change Pump Extractor -12V 60W Marine Oil Extractor Pump for Boat Truck RV ATV Diesel Scavenge Suction Pump 60W

  • Quick and Efficient- Oil Extractor Pump, a good helper for quick and clean oil changing. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃):....
  • Premium Quality-Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance. Fully enclosed....
  • Easy to Use-Install the oil transfer pump inlet and outlet hoses, tighten the hose clamps, connect the power clamps to the vehicle battery and turn on....
  • Operation Tips-Except ENGINE OIL/DIESEL/BIODIESEL, this oil extractor CAN NOT extract WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. Before use,....
  • Widely application-This professional oil suction pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving....
Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

  • Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
  • Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
  • Efficient - custom made metric fittings seal kit to engine with O-ring.
  • Rubber retainer loop holds kit in place when not in use.
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

2016+ Camaro SS Baffled Oil Catch Can Kit System | Bull Boost Performance RED

  • FITMENT: 2016-2020 Camaro SS LT1 Engine (Other Camaro Model Kits available at our Store).
  • Mounts in line with the engine system for sleek look.
  • Application NOT Specific but easy to mount bracket, oil can in an easily maintained location inside the engine bay.
  • Catch can has a 3.5 oz. capacity for longer servicing in between intervals, Filter and can are fully serviceable.
  • Includes Temperature Resistant Silicone Hoses for simplified install.
Check Stock

Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower

  • QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
  • POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
  • DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check Stock

EONLION 12V 100W Oil Change Pump Extractor for Automotive and Marine Upgrade with Over-load Protection and Ease Portable Handle Design Orange

  • [For Optimal Use] 1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before....
  • [Efficient working] The max 100W power is a good helper for you to change the oil quickly and clean. Diesel Flow Rate: 1.5L/min, Engine Oil Flow....
  • [Structure]We use pure copper for motors. Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit.....
  • [Safety] When the oil pump is overheated or operated improperly, the newly added overheat protection device will automatically cut off the power....
  • [Accessories] This oil pump comes with 2 outlet hoses, 2 inlet hoses, 4 hose locks and 2 battery clips..
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock