Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV
HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
Seeutek 80cc Bicycle Engine Kit 26" 28" Bike Bicycle Motorized 2 Stroke Cycle Petrol Gas Motor Engine Kit Upgrade with Speedoemter
80cc bicycle engine kit with speedometer.This bike engine kit fits most mens' 24" and larger bicycles which includes mountain,cruiser,chopper and road bikes with a V-frame, at least a 8.5" height clearance for the engine. Large bikes (larger frames/down tubes) may require the universal mount. Notes: Be assured the mixing ratio for gas and oil:16:1 for break period (first 300 miles)/20:1 after to avoid motor lock up or piston seized. Please read attached instruction manual before installation..
80cc bike motor kit, Mode of engine: single cylinder, air-cooling, 2-stroke.
lubrication oil: motorcycle synthetic 2 stroke oil. Notes: Fuel Type:Gas 93# and please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting..
The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
DNJ EK4172BM Master Engine Rebuild Kit for 2004-2008 / Ford/E-150, E-150 Club Wagon, E-250, E-350 Club Wagon, E-350 Super Duty / 5.4L / SOHC / V8 / 16V / 330cid / VIN L
THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
FITS: 04-08 Ford / E-150, E-250, E-350 Super Duty, E-450 Super Duty, E-150 Club Wagon, E-350 Club Wagon 5.4L V8 SOHC Naturally Aspirated.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ Flat Pistons, From 4/21/04.
You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
AKACIJA Chainsaw Sharpener Kit Portable Hand Cranked Chainsaw Sharpening Jig. Suitable for All Kinds of Chainsaws and Electric Saws. The Most Practical Outdoor Chainsaw Accessories
460 Rancher chainsaw is a robust all-round saw for jobs that need a longer Bar.
60. 3cc 24 inch gas chainsaw with guide bar and chain.
2 cycle fuel Included, Bar and chain oil must be purchased Separately.
60. 3cc 2 cycle engine with air injection and adjustable oil pump.
Husqvarna chainsaw with X-Torq lowers fuel consumption and reduces emissions.
The quick-release air filter facilitates easy cleaning and replacement of the air filter.
For safety use with Husqvarna chainsaw chaps and chainsaw helmet.
Chainsaw case, Replacement chainsaw chains and chainsaw sharpeners are available as separate purchases.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, 1st Design, Positive Type Stem Seals, Master Kit, w/ 3 Bolt No Sensor Hub Cam Gear.
You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Oil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower
QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
THINKWORK Oil Pump for Oil Change, 12V 80W Electric Oil Pump and Marine Oil Change Pump, Upgraded Oil Change Pump Extractor with Handle for Boat, Car, Motorcycle
...ough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
SAFE OPERATION - Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F (40℃-60℃) about 15 minutes to avoid clogging the oil pump due to oil solidification..
ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
THINKWORK GUARANTEE SERVICE - we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result..
...de] The maximum power is upgraded from the previous 60W to 80W, and the overload protection is upgraded to increase safety protection for your operation.In addition, you will get 1 additional outlet hose, 1 inlet hose, 4 hoses in total, but our price remains the same..
[Measured extraction speed]Under the premise of engine oil heating, the speed can reach 0.3gal/min, while the diesel extraction speed is 0.6-1gal/min, Voltage: 12V, maximum current: 7A, maximum power: 80W. According to the arrow Install the hose, Inlet Hose is thin, Outlet Hose is thick.
[Safe Operation]: To pump oil properly, before use, please heat the car engine to 104°F-140 °F (40℃-60℃) for about 15 minutes to prevent the oil from solidifying and blocking. Tips: it is NOT suitable for gasoline. Do not use this fluid oil change pump to extract water, gearbox oil, or easily flammable liquids (fuel, petrol, etc)..
[Application] This oil transfer pump can change engine oil and diesel for cars, boats, motorbikes, trucks, RV and ATV, and other 12V vehicles..
[What you get]: Package included: 1 x Pump.
2 x Battery Clamps. Service warranty: 12month warranty and friendly customer service. Please contact us via email if has any question..
