Best Engine Oil Pump Intermediate Drive Shaft

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

PEGGAS ✦New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Vertical Pump 7/8" Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head - Simpson -Briggs & Stratton -Ryobi

  • ...re even for washing your car or other things without being afraid to damage the paint!.
  • ✦ IMPORTANT FITMENT ✦ This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ From main center shaft to each mounting bolt is 4″ – center to center spacing between mounting bolts is: 7 11/16″ – 6 3/16″ – 6 7/16.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS IS MADE FOR A VERTICAL ENGINE WITH A 7/8″ SHAFT ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)..
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

WINGOGO 67F-44352-00-00 Water Pump Impeller Replacement for Yamaha Outboard 75 80 90 100 HP 4 Stroke Boat Motor Engine parts replace 18-3042 67F-44352-01 67F-44352-00 67F-44352-01-00

  • ...oard Motor OEM P/N:67F-44352-01, 67F-44352-01-00, 67F-44352-00, 67F-44352-00-00 Sierra 18-3042. Check your Boat Motor Part Number before Purchase. Please Message us if you are not sure..
  • Replacement for Yamaha Outboard 75 80 90 100 HP F75 F80 Jet Drive F90 F100 Boat Motors Engine Cooling System. More Detailed Information Please See Description Below..
  • Water Pump Impeller Dimensions : Internal / Insert / Hub / Shaft Size: 0.787 inch, Depth / Height / Width/Thickness: 1.366 inch, Overall / Outer / External Diameter: 2.291 inch. Blades 6 as Pictures Showed, Please see the pictures..
  • Compatible with the outboards boat motor Sierra Marine 18-3042 Mallory Marine 9-45612 GLM 89624 SEI Marine 96-499-03M. This Impeller Makes Repair and Maintenance of Water Pumps Easy..
  • To ensure this Impeller is suitable for your boat motor, It is VERY IMPORTANT to check your outboard Model or S/N before purchase. You can leave us message e.g. your Boat Engine Model, Serial Number, Horsepower or Year if you are not comfirmed this Water Pump Impeller fits Your Outboard Boat Motor or not. We’re pleasure to ....
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Westinghouse WPX2700 Gas Powered Pressure Washer, Soap Tank and Four Nozzle Set, CARB Compliant

  • 2700 PSI and 2. 3 GPM of Powerful, Deep-Cleaning Water Pressure Perfect for Decks, Sidewalks, Siding, Fences, Railings, Garage Floors, Exterior Walls, Cars and Patio Furniture – Easy to Fill 1 Gallon Gas Tank.
  • Half Gallon Onboard Soap Tank With 25′ Foot Abrasion Resistant Super-Flex Hose With Lightweight Spray Gun and 4 Quick Connect Nozzles (0°, 25°, 40° & Soap).
  • Heavy Duty Gas Powered 212cc 4-Stroke Westinghouse OHV Horizontal Shaft Engine with Recoil Start - Long Lasting, Maintenance-Free Axial Cam Pump For Durable and Convenient Use.
  • Tough Steel Frame Construction With 12″ High Profile, Never-Flat Wheels Provide Easy Transportation and Maneuverability – Includes Engine Oil, Tools, and Quick Start Guide to Get Started in Minutes.
  • All Westinghouse Pressure Washers are Functionally Tested in the Factory and May Contain Minimum Residual Oil and/or Fuel Odor.
  • Backed by 3-Year Limited Service, Labor, and Parts Coverage with Nationwide Customer Service and Support Network.
Check Stock

Diesel Engine 247CC 4 Stroke 5HP Single Cylinder Air Cooling Vertical Engine Motor Hand Start Direct Injection 3.6KW (Black, 173FA)

  • 【HIGH PERFORMANCE DIESEL ENGINE】247CC 4 Stroke Diesel Engine, equipped with self-injection diesel system, good atomization, low diesel consumption, more punctual diesel injection, and long service life. Widely Applicable for road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc..
  • 【RELIABLE COOLING DESIGN】Strengthen thickening aluminum alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【EASILY SPEED CONTROL】Comes with a speed control handle, it can be positioned at any speed, equipped with throttle cable mounting seat, and can install throttle cable according to needs. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS】Displacement: 247CC, Rated power: 3.6KW, Engine speed: 3600 RPM, Cooling mode: Air coo....
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

Pennzoil 36677 Pennzoil Multi-Use Pump

  • Multipurpose Transfer Pump: Universal gas siphon pump is designed for garage, home, auto, and marine use.
  • The transfer pump fits standard gallon containers and features a single pump.
  • Universal Fluid Pump: Works for all automotive fluids, water and as an inflation pump for tires, balls, pool toys and more.
  • The small size is perfect to keep in the trunk or in the garage.
  • Universal Fluid Pumps: Easy to use gas or air siphon pumps transfer fluid between containers or from container to engine, cooling system and more uses.
  • Ideal for vehicles, boats, motorcycles, RVs and any other vehicle with an engine.
  • Natural Gas and Oil: Base oil made from natural gas is 99.5% free of impurities typically found in crude oil.
  • Check out our full synthetic motor oils, power steering fluids, conventional motor oil blends, air and oil filters and more.
  • Pennzoil: The number one name in motor oil, we offer a range of products to protect and optimize vehicles and high performance racing car engines.
  • Find the right product for your car, truck, boat, automatic and manual transmission vehicles.
Check Stock