Zoeller 803-0001 Shark Model 803 1/2 HP 115V Residential Grinder Pump
This high efficient fuel pump is an perfect equipment for quick and clean oil-changes..
It works great for pumping engine oil, crude oil and heating oil..
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle
SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN
100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
Slim design provides maximum clearance for aftermarket headers.
Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
Float Switch for Sump Pump - 6-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps
CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 6-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps
CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids..
HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals..
NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F..
ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch..
5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs..
PumpSpy Dual Pump Install Kit - Double Sump Pump Connection, Basement Water Pump Backup Y-Connector - Sump Pump Submersible Backup Connector To Single Discharge Line - Dual Pump System To 1-1/2' Line
EASY INSTALLATION: Installing a backup sump pump can be tedious but not with the PumpSpy Dual Pump Install kit! This kit comes with everything you need to connect 2 sump pumps together to a single discharge line. All you’ll need for the process is a standard screwdriver. Install your pumps in a fraction of the time..
IDEAL SAFEGUARD SYSTEM: A flooded basement can cost thousands of dollars in damages. The best way to protect yourself from this kind of disaster is with a backup sump pump. This dual water pump installation kit makes it easier for you to install a backup system to avoid what could potentially be a major inconvenience..
HASSLE-FREE SET UP: There’s no cutting or gluing required during installation with this dual pump backup installer kit. Everything you need to connect a back up sump pump is in the box. There’s no need to purchase a PVC pipe, elbows, couplings and cement. Say goodbye to messy, laborious installations!.
WHAT’S IN THE BOX: This kit contains a Y-Connector, Two (2) 1-1/2″ Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. The only thing you’ll need to put everything together is a standard screwdriver. This kit is compatible with all pumps that have a standard 1-1/2″ NPT pump discharge/....
Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV
HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
