YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case
This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Universal Car Oil Catch Can Kit Polish Baffled Automotive Reservoir Tank 300ml with Breather Aluminum Compact Dual Cylinder
★ MAINTAIN EXCELLENT ENGINE PERFORMANCE - EIGIIS Oil Catch Can Kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold..
★ EASY TO CLEAN - EIGIIS Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily..
★ SAVE FUEL CONSUMPTION - EIGIIS Oil Catch Can Kit can effectively reduce the fuel consumption of high-speed engines and turbine engines. There is also a washable stainless steel screw on the filter/venting hole with a hose clamp to prevent loosening..
★ HIGH QUALITY MATERIAL - EIGIIS Oil Catch Can Kit is made of high quality 0046 aluminum for added strength and durability. The capacity is 300ml,enough for daily use.Universal for most car such as Subaru,2014 Santa Fe and 2013 Sonata,Mazda MX-5 etc..
67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks
Bolts and nuts Kit built from 3/8" Steel and Precision CNC Machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8..
Upgrade manufacturing, T - shaped parts are marked with "TOP" for ease of use. This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and install new valve springs..
This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!.
OE 67605, will be compatible with any LS engine for Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more. Also compatible with Dodge Ram 318 360 5.2 5.9 Engine (but need to use your original bolts)..
*Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfectly. It is not recommended to buy cheaper alternatives, which will not last long. Thanks!.
16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224
✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator
... F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then your IPR valve screen and seals may need replacing.
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement manufactured by AA Ignition and will fit, work and look exactly like the factory screen and seals found on your 6.0L Powerstroke vehicle. This kit also includes a socket tool specially made for removal and installation of your IPR valve which has a protruding electrical connector..
Lifetime Warranty - This replacement IPR tool and screen kit manufactured by AA Ignition comes complete with a lifetime warranty, if the parts fail simply contact us for a replacement. This is a complete kit which includes all the o-rings needed for a leak-resistant operation. Take advantage of o....
JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV
FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
5Pcs/Set Universal Dual Cam Clamp Camshaft Locking Tool Kit, Car Auto Sprocket Gear Engine Timing Tool Set
【Including】-- 5Pcs/Set universal Dual Cam Locking Tool Kit covers most single overhead cam engine, twin cams.
【Main Function】-- Engines lock camshaft kit to hold valve timing during belt replacement. Reduces repair time and prevents possible engine damage due to incorrect timing.
【For Engine Timing】-- Great tools for the engine timing, timing belt changing and other engine repairing. Master set contains the dual camclamp and 4 cam clamp singles for dual or quad overhead cam engines.
【Suitable For】-- Camshaft timing tool universal, suitable for most of petrol and diesel engines with dual camshaft.
【Strong & Durable】-- Made of best quality plastic and metal material for long service time, high strength and durable. Compact design to allow easy operation in small engine bays.
