NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
Easy to use, can be fine-tuned by potentiometer.003cbr003e.
Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
USB Voltage Regulator DROK DC 3.5V-15V to DC 0.6V-30V Buck Boost Converter 5v to 3v 12v 24v 2A 15W Step Up Down Power Supply Module Digital Voltmeter Ammeter
PER Mode --- used as a USB buck boost converter with constant voltage and current function, input voltage range DC 3.5-15V, output voltage range DC....
VAH Mode --- used as a multimeter to measure and display voltage, current, power, capacity, energy, time and temp, detect fast charge protocol. Input....
90W AC DC Adapter Converter Compatible with ResMed AirMini AutoSet Travel Machine, Replace Powe-r Supply Cord
Compatible with ResMed AirMini AutoSet Travel Machine.
The AirMini DC/DC Converter allows you to operate your machine from a vehicle cigarette lighter socket (12V or 24V DC po-wer source) in a car, boat, or other vehicle equipped with a suitable batt-ery..
The AirMini DC/DC Converter is specifically for use with the AirMini machine..
Make sure the converter is not covered during use to avoid overheating the converter..
1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power
★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
ACEIRMC 3pcs XL6019 5A High Power Current DC to DC Step-up 5V 6V 12V 24V 3-35V to 5-40V XL6019 Converter Adjustable Voltage Regulator Power Modules Boost Module Booster (3pcs)
Conventional Constant Voltage Output BOOST Fully Integrated Solutions, Integrated MOSFET, Fewer External Components, Smaller Cos System.
XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module.
Adjust the blue knob of the potentiometer (counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage.
Built-in over temperature protection, full set overcurrent protection circuit reliability, high reliability.
DC DC Voltage Step Up Converter Boost Power Module 10-60V to 12-97V 1500W 30A CC CV
ADJUSTABLE VOLTAGE -- This is a non-isolated DC power converter module with long service life.High power and stable output, it converts 10-60VDC to 12-97VDC..
97% HIGH CONVERSION EFFICIENCY -- High quality components ensures high conversion efficiency, up to 97%..
WIDELY APPLICATION -- This Boost Power Module is widely used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
DESIGNED WITH SMART TEMPERATURE CONTROL FAN -- Which will automatically work when temperature reaches about 60, and stop when temperature drops below 60..
NOTE: When using battery, switching power supply, solar panel, or generator as input power, please it is necessary to decrease the battery protection voltage value. Otherwise it will cause damage to the battery and the power supply..
Bridge Rectifier, 3Pcs AC to DC Power Conversion Module, 1N4007 Full Bridge Rectifier Filter Power Supply Module for Model Train Railroad LED (Input AC 6V-16V (capacitance 25V1000UF))
AC to DC power converter module, 1N4007 full wave bridge rectifier filter. Module size: 31x14x20mm/1.22x0.55x0.78inch, wire Length: 90mm/3.54inch..
This product is a streamlined rectifier filter module, widely used in small rectifier output filter, mainly used in the power requirements of the electrical is not very high..
The power module design can be put into a smaller small electrical box, the circuit Board above the design of power indicator light, easy to turn on the power supply can be intuitive to know the power status..
Rectified output voltage: output = input x1.414 . Example: input 12V AC, then the output 12x1.414 = 16.968V, which is the calculated result of no-load voltage, only a reference, the actual deviation..
Please NOTE: plug-in products, manual soldering, inconsistent capacitor pin height is a normal phenomenon. AC input voltage [6V-16V] (capacitance 25V1000UF).
AC input voltage [6V-32V] (capacitance 50V470UF), please seclect the one you need..
[2 Pack] DC-DC 5A Buck Converter 4-38V to 1.25-36V Step-Down Voltage Regulator High Power Module with LED Display
【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
【Input Voltage】DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost)..
【Output Voltage】DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A..
【Mini Size】62*38*14 mm (with potentiometer). 2 sets included..
【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
