Best Epdm Granula

Dicor RP-RRK-30 RV Roof Renew Kit

Includes four Gallons of Dicor White Acrylic Roof Coating, two quarts of Dicor Cleaner/ Activator, one 4 inch x 50 feet Roll Coating Ready Cover Tape, one Metal Pan, one 9 inch Paint Roller, two 9 inch Roller Covers, one roll 1 inch Masking Tape.
Each kit comes with a warranty and easy to follow instructions.
A polyester fleeced-back seam sealing tape for sealing cracks or tears in EPDM rubber or TPO RV roofing.
Individual components can be purchased separately.
Cleaner Activator: A low viscosity, pinkish liquid that chemically alters the EPDM surface to which it is applied creating a lock and key effect with the subsequent two coats of ACRYLIC COATING..

2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Complies with SAE J1127. IEC and RoHS compliant.

...4 PCS 1.77 "x2.48 "x1.18 " (45x63x30mm) Stainless Steel 304 Flat Back Round Glass Clamps, Fits 1/3"-1/2" tempered glass, A very elegant looking Satin brushed surface, It can be perfectly used for balustrade, staircase, handrails, bathrooms, balcony, etc..
3.STRONG FIXATION AND LOAD-BEARING ABILITY】The high quality EPDM rubber pad and safety pin , can ensure that the tempered glass is tightly fixed to the glass clip, and can also make the glass clip has a strong load-bearing capacity, and thus its safety is better guaranteed.
4.【DURABILITY AND SAFTY 】 The glass clip and safety pin are made of high grade stainless steel 304 material, and the rubber pads are made of aging resistant EPDM, so they have excellent heat, water and corrosion resistance after installation, not easy to damage,It can be used in both indoor and outdoor areas..
5.【EASY TO INSTALL AND ADJUSTABLE】3 types of EPDM rubber pads are available in sizes of 1/3"(8mm), 3/8"(10mm) and 1/2"(12mm) respectively, The applicable glass thickness can be adjusted from 1/3"-1/2"(8-12mm)..

Slides over pipe - for pitch to 45 degrees.
Use silicone sealant between base and surface, and secure with sheet metal screws.
Continuous Temperature Resistance to 212 Degree F. Intermittent Temperature Resistance to 275 Degree F..

Easily customized to accomodate a broad range of pipe diameters.
Non-fading EPDM collar provides maximum resistance to weathering caused by ozone and UV rays.
Engineered for profiled roofing systems at any pitch.
Use silicone sealant between base and surface, and secure with sheet metal screws.
Slides over pipe - for pitch to 45 degrees.

SIZE - 9mm (0.35-inch) Wide 2mm(0.08-inch) Thick 16 Feet Per Piece(Each Roll can be divided into 2 Pieces), fit for 1mm - 2mm gap.
TEMPERATURE RANGE - From -50 Degree Celsius to 150 Degree Celsius.
EPDM MATERIAL - EPDM rubber seal. Good flexibility, rubber-like elasticity, good chemical stability, good anti-aging and ozone resistance.
FOAM TAPE - Weather proof, oil resistance, resistant to corrosion, dust proof, shock-absorbing, sound and heat insulation, anti-skidding and insulating.
APPLICATIONS - Widely used in various doors and windows, furniture, electrical cabinets, speakers, etc..

SIZE - 9mm (0.35-inch) Wide 2mm(0.08-inch) Thick 8 Feet Per Piece(Each Roll can be divided into 2 Pieces), fit for 1mm - 2mm gap.
TEMPERATURE RANGE - From -50 Degree Celsius to 150 Degree Celsius.
EPDM MATERIAL - EPDM rubber seal. Good flexibility, rubber-like elasticity, good chemical stability, good anti-aging and ozone resistance.
FOAM TAPE - Weather proof, oil resistance, resistant to corrosion, dust proof, shock-absorbing, sound and heat insulation, anti-skidding and insulating.
APPLICATIONS - Widely used in various doors and windows, furniture, electrical cabinets, speakers, etc..

2 AWG (2 Gauge) Cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Complies with SAE J1127. IEC and RoHS compliant.