HOTSYSTEM D-Shape Door Rubber Seal Strip Weatherstrip 3M Self Adhesive Hollow for Car Truck Motor Door Cover Trunk (Black, 26.25 feet)
Adhesive:With 3M self adhesive, no adhesion promoter is required,direct installation..
Material:Made of EPDM rubber,native,non-toxic,harmless,ozone resistance,no special harmful odors,good elasticity and strong tensile strength,high temperature ande cold resistant..
Application:Apply to seal the front and back covers,car doors,pillar,trunk of various vehicles series..
Note:Please see the cross-section shape of original seal strip and check it fit your car or not before placing an order..
Futuwi Foam Weather Stripping-3 Rolls, 1/2 Inch Wide X 1/2 Inch Thick Total 20 Feet Long, Foam Seal Tape for Doors and Windows(6.5ft x 3 Rolls)
【3 Rolls Adhesive Foam Strip】The insulating foam kit includes 3 Rolls of 1/2" W X 1/2" T X 6.5' L foam tape, (6.5ft x 3 Rolls) Total 20 Feet Length. Soft enough to be customized into different size and shape..
【High Quality EPDM Foam Tape】The foam seal tape is made from EPDM. Compared with Neoprene CR foam it has excellent resistance to heat and weather aging, ozone, chemical, water and deformation, and can be used at temperatures ranging from -50℃ to 150℃..
【Strong Grid Adhesive Insulation Foam】Compared with most other white adhesive foam seal strip, this tape has upgraded strong grid adhesive backing, non-degumming and waterproof, stick firmly. Due to strong adhesive backing, it will not easily peel off..
【Widely Used Foam Weather Stripping】Widely used in various door seal and window insulation, furniture, electrical cabinets, cars, speakers, toys, handicrafts, sports equipments, garage door, rv, louvers, air conditioner, etc. It can also apply soundproof and waterproof in families..
【Adjustable & Flexible】Easy to use and cut to what size you need, and bend easily and conform to any shape. Please note to clean the surface before applying for better performance..
Front Runner Wind Fairing Compatible with Land Rover Discovery LR3/LR4
DURABLE AT ITS FINEST: This Front Runner Wind Fairing is made of Black powder coated aluminum and EPDM Rubber. It help improves fuel consumption..
IMPROVING AERODYNAMICS: Improve the aerodynamics of your Front Runner Slimline II roof rack and reduce wind noise when travelling at high speeds..
SECURED AND PROVEN GEAR YOU CAN TRUST: Securely mounts to Slimline II rack and extends to the Discovery LR3/LR4's roof. A clear protective strip for the roof is included that stops any scuffing caused by dust..
DIMENSIONS: 157mm (6.2") L x 1174mm (46.2") W x 174mm (6.9") H and consists of 1 x Wind Fairing, 1 x Rubber Blade, and Installation Hardware..
INSTALLATION AND FITTING: An additional rubber blade is fitted to the bottom edge of the Wind Fairing to seal any gaps and act as a roof guard when traveling over rough terrain. Includes all installation hardware and fitting instructions..
This product is only suitable for a Front Runner Roof Rack..
ESI Ribbed Rectangle Rubber Seal – .187” Height .500” Width 25’ Length – EPDM Foam Rubber Seal with 3M 4011 Acrylic Foam Tape, Ideal Door and Window, Automotive Weather Stripping, Garage, Cars, Boats
ESI Ribbed Rectangle Rubber Seal – .187” Height .500” Width 25’ Length – EPDM Foam Rubber Seal with .375" Width 3M 4011 Acrylic Foam Tape. Fills height gaps from .100" to .168"..
Provides excellent resistance to water absorption, ozone, sunlight aging, low temperature and compression set so you can confidently install in a variety of applications.
WIDE RANGE OF APPLICATIONS: Rubber seal works on marine, automobile and home cases – providing door, window and hatch seals for cars, trucks, RVs, trailers, boats and more.
All products are made from a custom formulated EPDM sponge rubber compound that guarantees protection from weather and noise for years to come. ESI (Extruded Solutions Inc) is a family run business since 2008. MADE IN THE USA.
KX Automotive Universal New Weather Stripping EPDM Rubber Seal Strip D-Shape Self Adhesive Car Truck Door Window Weather Strip Soundproof Noise Insulation Sealing (20 FT(6M))
✅【Size】Size: 0.57in/14.5mm * 0.649 in/16.5mm, 20 Feet(6 Meter). Please confirm whether the size is what you want before buying..
✅【Material】Be made of EPDM rubber. This Rubber Seal Weather Strip is less smell and no harm to human body. Thick and felxible rubber with strong adhesive backing, paste firmly, good resistance to heat & cold, not easy to fall off and keeps it stick on your truck tailgate for a long time..
✅【Function】Soundproof, dustproof, waterproof, windproof, also improve air conditioner using effect. It can be also used on door frame, window to reduce the erosion-collision..
✅ 【Widely Used】Suitable for most kinds of Cars, SUV, Vans and Trucks. Apply to seal the front and back covers,car doors, pillar,trunk of various vehicles series..
✅【Easy Installation】Cleaning the surface, Measuring the length, Tear off the film and Sticking in place(hard press for a while to ensure the it can be installed firmly, and don't touch it within 72 hours)..
DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
DIMENSIONS: 1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
This product is only suitable for a Front Runner Roof Rack..
The closed cell foam strip is made from environmental protection material EPDM, weather proof, shock-absorbing, anti-vibration, buffering, sealing, anti-skidding, insulating, oil resistance, resistant to corrosion, dust proof, flame retardant, heat insulation.
The high density foam seal strip uses upgraded strong adhesive backing, waterproof and non-degumming, and stick firmly. Please note that clean the surface before applying for better performance.
DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
DIMENSIONS: 1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
This product is only suitable for a Front Runner Roof Rack..
DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
DIMENSIONS: 1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
This product is only suitable for a Front Runner Roof Rack..
KX Automotive Universal D-Shape Door Seal 0.47\ Height X 0.55\ Width Weather Stripping EPDM Rubber Seal Strip Self Adhesive Car Truck Door Window Soundproof Noise Insulation Sealing (20 FT(6M))
✅【Size】Size: 0.55in/14mm * 0.47 in/12mm, 20 Feet(6 Meter). Please confirm whether the size is what you want before buying..
✅【Material】Be made of EPDM rubber. This Rubber Seal Weather Strip is less smell and no harm to human body. Thick and felxible rubber with strong adhesive backing, paste firmly, good resistance to heat & cold, not easy to fall off and keeps it stick on your truck tailgate for a long time..
✅【Function】Soundproof, dustproof, waterproof, windproof, also improve air conditioner using effect. It can be also used on door frame, window to reduce the erosion-collision..
✅ 【Widely Used】Suitable for most kinds of Cars, SUV, Vans and Trucks. Apply to seal the front and back covers,car doors, pillar,trunk of various vehicles series..
✅【Easy Installation】Cleaning the surface, Measuring the length, Tear off the film and Sticking in place(hard press for a while to ensure the it can be installed firmly, and don't touch it within 72 hours)..
