Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ port.
It gives you all the basic functionality for a managed switch, plus more.
Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
Wireless Bridge Gigabit High Speed, Aitupal 5.8G 1Gbps Point to Point WiFi Outdoor CPE with 14dBi High-Gain Antenna, Lang Range Up to 5KM, Plug and Play, 48V PoE Power, IP65 Waterproof [2-Packs]
...abit RJ45 port and 48V PoE support, it can be applied in all over the world for long range PTP/PTMP.
[High Power, More Range] Long Range WiFi Bridge 512AC, Its RF power up to 25dBm, equipped with 14dBi panel antenna, the point to point wireless range up to 5KM distance.
[867Mbps Data Rate & Gigabit WAN/LAN Ports] the ethernet bridge features 802.11ac Wi-Fi and 2*2 MIMO technology, 867Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
[5GHz frequency, more channels] internet bridge with 4.92GHz to 5.92GHz frequency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
[Power over Ethernet] wireless bridge kit has integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. it work with Ethernet PoE Switch.
PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies
Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Mikrotik CRS328-24P-4S+RM 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case Dual Boot and PoE output 500W
Mikrotik CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in.
The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
It has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
Aruba Instant On 1930 24-Port Gb Ethernet 24xGE PoE (195W), 4X 1G/10G SFP+, L2+ Smart Switch US Cord (JL683A#ABA)
The Aruba Instant On 1930 24G Class 4 PoE 4SFP/SFP+ 195W Switch is a high performance, smart managed switch designed for small and medium businesses - fast set-up, easy management, security you can trust..
Configuration: Rack-width design with rack mounting ears. Or place desktop or flat surface. Ports and LEDs facing the front - #ABA w/ internal power supply and US-syle plug..
Management: Simplified cloud management from app or web browser with no recurring cost - The Aruba Instant On mobile app allows you to set up, manage, and monitor Instant On switches and Access Points directly from your phone, from anywhere. Guided step-by-step instructions to install devices to get your network up and running quickly – no technical expertise required. Alternative integrated traditional full local web interface for advanced configuration with static routing, ACLs, SNMP..
Ports: 28 active ports | 24x Gigabit 10/100/1000 + 4x Gigabit / 10G SFP+ slots | Power over Ethernet: PoE / PoE+ (Class 4) on 24 ports | PoE power budget 195 Watts | High-performance future-proof switch.
Aruba Instant On 1930 48-Port Gb Ethernet 48xGE PoE (370W), 4X 1G/10G SFP+, L2+ Smart Switch US Cord (JL686A#ABA)
The Aruba Instant On 1930 48G Class 4 PoE 4SFP/SFP+ 370W Switch is a high performance, smart managed switch designed for small and medium businesses - fast set-up, easy management, security you can trust..
Configuration: Rack-width design with rack mounting ears. Or place desktop or flat surface. Ports and LEDs facing the front - #ABA w/ internal power supply and US-syle plug..
Management: Simplified cloud management from app or web browser with no recurring cost - The Aruba Instant On mobile app allows you to set up, manage, and monitor Instant On switches and Access Points directly from your phone, from anywhere. Guided step-by-step instructions to install devices to get your network up and running quickly – no technical expertise required. Alternative integrated traditional full local web interface for advanced configuration with static routing, ACLs, SNMP..
Ports: 52 active ports | 48x Gigabit 10/100/1000 + 4x Gigabit / 10G SFP+ slots| Power over Ethernet: PoE / PoE+ (Class 4) on 48 ports | PoE power budget 370 Watts | High-performance future-proof switch.
The SWS12-8POE SonicWall switch delivers highspeed network switching while providing unparalleled performance and manageability. It prioritizes certain traffic on the network such as VOIP for video conferences while working from home, with features such as QoS. This switch is ideal for small and medium-sized business (SMB), and Software-Defined Branch (SD-Branch) deployments..
SonicWall Switch offers Zero-Touch Deployment capability with the ability to quickly roll out devices across branches spread out globally. Admins can quickly and securely deploy these switches at new locations without requiring any costly on-site IT personnel..
The SonicWall Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass..
YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play
【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
【Plug and Play】Easy setup with no software installation or configuration needed.
The US-8-60W is an 8-port gigabit switch with four 802.3af PoE ports. Its auto-sensing PoE ports deliver up to 15.4W of power per port.
Product dimensions – 5.83” L x 1.21” W x 3.92” H | Ports quantity – 8 | Background noise level – 27.5 dB | Power method – 48VDC, Max. 2A | Weight – 15.24 Oz. | Max power consumption – 12W | Operating temperature – 23 to 113° F.
The new 8-port models feature Gigabit Ethernet ports in a compact form factor.
The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss, with a switching capacity of 16 Gbps.
A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts.
